Our Latest Blogs
Many recent developments were made in the forging industry to increase the accuracy of forged components. Using the micro forging process, biomedical instruments with high precision can be mass-produced economically.
05 Jul 2022
From small light fixtures to automotive body parts, sheet metal parts are used extensively because of their high strength, low weight, and resistance to corrosion. Sheet metals of varying thicknesses are used for different types of machinery as per the respective standards.
Companies seek candidates who can differentiate themselves from the colossal pool of engineers. You could have a near-perfect CGPA and be a bookie, but the value you can provide to a company determines your worth.
04 Jul 2022
If the CFD engineering domain interests you, then gaining hands-on experience and learning relevant skills will go a long way in building a lucrative career. You can work towards your career goal by enrolling in the Post Graduate Program in Computational Fluid Dynamics by Skill-Lync.
01 Jul 2022
When the material is loaded, it deforms and changes its shape. Figure 1.1 shows the typical engineering stress-strain behavior of the material under loading. It is difficult to detect at which point the material changes from elastic to plastic. In such cases, 0.2% offset yield strength is calculated to distinguish the elastic and plastic region.
the future of the Electric Vehicle industry in India is not without its challenges. Inadequate infrastructure, high initial cost and lack of high-performing EVs are a few hurdles that affect their mass adoption.
30 Jun 2022
Engineering and mathematical problems that are space and time-dependent can be described by partial differential equations.
29 Jun 2022
When the elements in a model deform but the strain energy is not computed for that deformation, it results in an Hourglass deformation effect or Hourglass effect. Usually, this can be clearly seen in the post-processing stage where the elements will have a zig-zag formation.
28 Jun 2022
This effect shown in the kinematic hardening is known as the Bauschinger effect. For large strain problems, kinematic hardening model is not a good choice because of the Bauschinger effect.
27 Jun 2022
Have you observed the movement of the needle in the sewing machine? The. periodic to and for or up and down motion of the needle is called reciprocating.
24 Jun 2022
Have you ever noticed an unwanted sound from your engine? The tapping or pinging sound from your engine may be due to engine knocking. Learn more about IC engines through Skill-Lync courses.
23 Jun 2022
CFD simulation has attempted to overcome the majority of the traditional issues by allowing design engineers to perform the same tests at a lower cost and under virtually the same conditions.
22 Jun 2022
Yoga is a spiritual practice that attempts to align the mind, body and breath through a series of poses and breathing exercises.
20 Jun 2022
Biomedical Engineering plays a significant role in ideating and innovating to provide better health care. About 45% of recorded deaths in 2020 were due to the inadequacy of healthcare.
02 Jun 2022
Engineering is a broad field with many opportunities in future. It provides a fertile ground for developing research skills and offers the necessary impetus for emerging scientists to drive innovation and novel designs of new technology and devise new methods for using existing technology.
30 May 2022
In older times, the fuel injection system is mechanical, and it depends upon the cam mechanism. Thus, it was directly dependent on the engine speed. In this, the pressure was low at lower speeds, and this led to poor atomisation.
27 May 2022
E-learning platform that equips ENGINEERS with industry-relevant skills, focussed on helping you land your dream job/admit.
© 2022 Skill-Lync Inc. All Rights Reserved.
Login/Signup
Projects 
Blogs
05 Jul 2022