Free engineering calculators for design and quality engineers

Six tools for the questions that come up on every drawing review and shop floor: is the hole in position, will the gap close up, what are the limits of this fit, which failure mode comes first, can this part be made cheaply, and what does this gear train do. Each has a worked example checked by script. Free, no sign-up.

6 tools · built by Skill-Lync's design and quality team · Updated 16 Nov 2026

ASME Y14.5-2018 / ISO 1101

True position calculator

Is this hole in position, once MMC bonus tolerance is counted?

Position from X/Y deviations, MMC and LMC bonus, virtual and resultant condition, pass/fail for a whole CMM report, and the fixed/floating fastener formula.

Example In the worked example 3 of 4 cover-plate holes pass. Hole 3 is Ø0.553 off against a stated Ø0.5, and passes only because it earned 0.15 mm of bonus.

Open the true position calculator →
1-D linear stacks

Tolerance stack-up calculator

Will this gap always stay between its limits when real parts are assembled?

Worst case, RSS, predicted rejects in ppm, Cpk, a 100,000-assembly Monte Carlo and each tolerance's share of the variation, with unequal tolerances handled.

Example The gear-float example: worst case 0.07 to 0.71 mm fails the 0.60 mm limit, RSS 0.237 to 0.543 mm passes.

Open the tolerance stack-up calculator →
ISO 286-1 and 286-2

Limits and fits calculator

What are the limits of an H7/g6 (or any) fit at my size?

Hole and shaft limits for IT1 to IT14 and every common letter up to 500 mm, clearance or interference, a zone diagram and the preferred fits.

Example 25 H7/g6: hole 0 to +21 µm, shaft −7 to −20 µm, so a clearance of 7 to 41 µm.

Open the limits and fits calculator →
AIAG-VDA FMEA Handbook (2019)

FMEA RPN and Action Priority calculator

Which failure modes need action first?

RPN and the AIAG-VDA Action Priority (High, Medium, Low) from severity, occurrence and detection, with the full AP table and a worksheet you can download.

Example Severity 9, occurrence 4, detection 2 has an RPN of only 72, yet its Action Priority is High; 6/5/5 has twice the RPN (150) and is Low. That is why AIAG-VDA moved away from ranking by RPN.

Open the fmea rpn and action priority calculator →
Sourced design rules

DFM checklist

Can this part be made cheaply as drawn?

43 checks for moulded, sheet metal and machined parts and for assembly, each with a sourced number, plus rule calculators and a printable PDF.

Example Covers wall thickness and draft for moulding, bend radius and hole-to-bend distance for sheet metal, and corner radii and hole depth for machining.

Open the dfm checklist →
Willis equation, standard 20° teeth

Planetary gear simulator

What ratio, speeds and torques does this planetary gear set give, and will the planets fit?

An animated sun, planet and ring set drawn in true mesh, all 6 single-input configurations plus a two-input power split, member torques, planet spin, a speed nomograph and the assembly and adjacency checks.

Example A 24-tooth sun in a 72-tooth ring with the ring held gives 4:1; 2, 3, 4 planets fit, 5 do not because (24 + 72)/5 is not a whole number.

Open the planetary gear simulator →

Which tool answers which question?

Most tolerance problems on a mechanical drawing fall into one of three questions: where a feature is (position), how big it is (size and fit), and how the variation adds up across parts (stack-up). Quality engineers then rank what could go wrong (FMEA) and designers check the part can be made (DFM).

You need to knowUse
If a hole pattern from a CMM report is in position, with bonus toleranceTrue position
What position tolerance a bolt pattern can have (fastener formula)True position
The worst-case and statistical range of a gap, and which part to tightenStack-up
The limits of H7/g6, H7/p6 or a clearance hole such as H13Limits and fits
Whether a failure mode needs action under AIAG-VDAFMEA
Wall, draft, bend and hole rules before a design reviewDFM checklist
The ratio, speeds and torques of a planetary gear set, and whether its planets fitPlanetary gear

The tools link to each other where the work does: a stack-up row for a GD&T position tolerance comes from the true position page, and a clearance-hole size tolerance from the limits and fits table.

How Skill-Lync checks these tools

A calculator is only useful if its numbers are right. For each tool, Skill-Lync keeps an independent Python script next to the site's code that recomputes the worked example, and the page fails to build if the script and the calculator disagree. The ISO 286 limits were compared cell by cell with two published tables; the FMEA Action Priority table was checked on all 1,000 combinations of severity, occurrence and detection; the true position script confirms on 200,000 random holes and pins that the bonus-tolerance check and a functional-gauge check give the same answer; the planetary gear script derives every ratio a second way, from pitch-line velocities. Each tool page lists its sources and what it does not cover.

More calculators, including bolt torque and PCB trace width, are on Skill-Lync Resources.

Go from calculator to job-ready

Skill-Lync's design courses teach GD&T, tolerancing, DFM and FMEA on industry drawings and projects.

Frequently asked questions

Are these engineering calculators free?

Yes. Every tool on this page is free, needs no sign-up, and runs in your browser, so nothing you type is sent to Skill-Lync. The only form is the optional counselling or PDF form, which you fill only if you want a call or the DFM checklist PDF.

How are the calculators checked?

Each tool's worked example is recomputed by an independent Python script kept with the site's code, and the page refuses to build if the script and the calculator disagree. The ISO 286 table was checked cell by cell against two published sources, and the FMEA Action Priority table on all 1,000 severity, occurrence and detection combinations.

Which calculator do I need for a GD&T drawing?

For the location of holes and pins use the true position calculator (it includes MMC bonus tolerance and virtual condition). For how tolerances add up across an assembly use the stack-up calculator. For the size tolerance of a fit, such as a bearing seat or a clearance hole, use the limits and fits calculator.

Can I use these results on a production drawing?

Use them to check and learn, then confirm against the standard your drawing invokes (ASME Y14.5 or ISO GPS) and your company's rules. The tools cover the common cases and say what they leave out, for example datum shift in the true position calculator and non-linear stacks in the stack-up calculator.

Related on Skill-Lync

Design and quality careers

Talk to a counsellor.

GD&T, stack-ups, fits and FMEA are asked in design and quality engineer interviews at automotive and product companies. We'll map the right program to the job you want.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.