Carburettor (carburetor) calculator

Size the venturi throat and the main fuel jet of a simple carburettor from the air or fuel flow, the air-fuel ratio, the discharge coefficients, the nozzle lip and a throat velocity, depression or diameter. Every answer is worked twice, ignoring the compressibility of air (Bernoulli) and including it (isentropic flow), with the steps shown. It also shows how a given carburettor's mixture changes with air flow and altitude, and how much air an engine draws. Free, no sign-up, runs in your browser.

It opens on the worked example from Skill-Lync's carburetor component page (how a carburettor works, with a 3D model): a 1.2 L engine at 5,500 rpm with a 24 mm venturi. The other presets are solved problems from Indian IC engine textbooks, each with its published answer beside ours.

Simple carburettor · incompressible and compressible · nozzle lip · altitude (ISA) · engine CFM · checked against an independent script (1,483 checks at build) · Updated 22 Nov 2026

Air at the intake
Flows
Fuel, jet and nozzle
Throat condition

Change any number and everything updates. Air density 0 means it is worked out from p₀ and T₀; give a value (textbooks often use 1.2 kg/m³) to use it instead.

Throat depression (compressible)8.65 kPaincompressible 7.86 kPa
Jet diameter (compressible)1.434 mmincompressible 1.469 mm
Throat velocity (ideal)122.0 m/sMach 0.359 · incompressible 114.4 m/s
Throat pressure0.9268 bar64.9 mm Hg depression
Fuel velocity at jet4.79 m/sincompressible 4.57 m/s
Air and fuel3.168 kg/minfuel 14.62 kg/h · A/F 13.00
  • Compressibility deepens the throat depression by 10.06% and changes the jet by 2.44%; throat Mach number 0.359. Use the compressible answer.
  • The 5 mm lip needs 36.8 Pa (3.8 mm of water) before any fuel flows: an ideal throat velocity of 7.83 m/s.
  • A/F 13.00: λ = 0.88 against petrol's stoichiometric 14.7 (rich).

Skill-Lync /components/carburetor worked example (incompressible, air density 1.2 kg/m³)

QuantityPublishedThis calculator
Air flow52.8 g/s52.8 g/s
Throat velocity≈ 114 m/s114.4 m/s
Depression≈ 7.9 kPa7.86 kPa
Main jet≈ 1.47 mm1.47 mm

Step-by-step working

Incompressible (Bernoulli)

  1. ρ₀ = 1.2 kg/m³ (given)
  2. ṁ_f = 0.0528 / 13 = 0.004062 kg/s
  3. A_t = π/4 × 24² = 452.4 mm²
  4. Δp = (0.0528 / (0.85 × 0.0004524))² / (2 × 1.2) = 7,855.9 Pa

Compressible (isentropic)

  1. c_p T₀ = 3.5 × 1,01,325 / 1.2 = 2,95,531 J/kg
  2. A_t = π/4 × 24² = 452.4 mm²
  3. 0.0528 = 0.85 × 0.0004524 × ρ₂(p₂) v₂(p₂) → p₂ = 92,679 Pa (Δp = 8,646.3 Pa), v₂ = 122 m/s
  4. ρ₂ = 1.2 × (92,679 / 1,01,325)^(1/1.4) = 1.126 kg/m³

Fuel jet

  1. incompressible: Δp_f = 7,855.9 − 750 × 9.81 × 0.005 = 7,819.1 Pa
  2. incompressible: A_j = 0.004062 / (0.7 × √(2 × 750 × 7,819.1)) = 1.694 mm², d_j = 1.469 mm, v_f = 4.566 m/s
  3. compressible: Δp_f = 8,646.3 − 750 × 9.81 × 0.005 = 8,609.5 Pa
  4. compressible: A_j = 0.004062 / (0.7 × √(2 × 750 × 8,609.5)) = 1.615 mm², d_j = 1.434 mm, v_f = 4.792 m/s

How to use the carburettor calculator

  1. Set the air at the intake. Textbook problems give 1.013 bar with 27 °C (300 K), 25 °C or 15 °C; some give the density directly as 1.2 kg/m³. Type that into the density box and the temperature is no longer used.
  2. Size a carburettor (the usual exam problem). Give the air flow and A/F, the fuel flow and A/F, or both flows. Then the fuel's specific gravity (petrol is 0.72 to 0.775 on HPCL's BS-VI specification), the two discharge coefficients and the nozzle lip, the height of the nozzle tip above the float-chamber fuel level.
  3. Give one throat condition: a velocity, a depression (mm Hg, mm of water, kPa or bar) or the throat diameter. If the problem calls its Cd a velocity coefficient and gives the actual air speed, pick "Actual". The calculator then works with the ideal speed, actual ÷ Cd.
  4. Two optional textbook twists. Some problems say the depression at the fuel jet is a fraction of the throat depression (0.75 in Gupta's Example 9.1 and Rajput's Example 11.7): that is k. Others put an emulsion tube or nozzle inside the throat, 0.4 of the throat diameter in Rajput's Example 11.8: that is the nozzle / throat ratio, which leaves an annulus for the air.
  5. Analyse a carburettor when the throat and jet sizes are known. Give an operating air flow or depression to get the A/F there. The chart sweeps the whole air-flow range, and the altitude box shows the mixture at height.
  6. Engine air demand turns displacement, speed and volumetric efficiency into the air flow. One click sends it to the sizing or analysis tab.

Simple carburettor formulas

Air through the venturi. With the air treated as incompressible, Bernoulli between the atmosphere (state 0) and the throat (state 2) gives the depression, and continuity the mass flow. At is the throat area and Cd,a its discharge coefficient:

Fuel through the main jet. The float chamber is at atmospheric pressure, so the fuel sees the throat depression less the head needed to lift it over the nozzle lip z:

Dividing one by the other gives the mixture a simple carburettor supplies. With z = 0 the last root is 1 and A/F would stay the same at every flow:

Including compressibility. The air expands as it speeds up, so its density in the throat is lower. The steady-flow energy equation along an isentrope gives the ideal throat velocity and density. The area is then sized on ρ₂, not ρ₀:

The calculator takes cp = γR/(γ − 1) (1,004.5 J/kg K for R = 287 and γ = 1.4) so that the velocity formula and the isentrope agree exactly. Textbooks often round cp to 1,005, which changes the throat diameter in the fourth figure. The throat can't pass more air than it does at the speed of sound, which for γ = 1.4 is a throat pressure of 0.528 p₀. The calculator stops you there.

Fuel starts to flow only once the depression equals the lip head, at a throat velocity of

Worked examples: published answers against this calculator

Each preset is a solved problem from a book or lecture. The numbers are the problem's own, and the published answers are given to their printed precision. The textbook problems were read from the FOSSEE Textbook Companion series (IIT Bombay), which reproduces each example's data and solution.

ExampleMethodQuantityPublishedThis calculator
Skill-Lync /components/carburetor worked exampleincompressible, air density 1.2 kg/m³Air flow52.8 g/s52.8 g/s
Throat velocity≈ 114 m/s114.4 m/s
Depression≈ 7.9 kPa7.86 kPa
Main jet≈ 1.47 mm1.47 mm
H. N. Gupta, Fundamentals of IC Engines, Example 9.1 (also Mathur & Sharma Example 11.1)compressible; 90 m/s is the actual velocity, velocity coefficient 0.8; jet depression 0.75 × throatThroat diameter3.251 cm3.251 cm
Jet diameter2.2 mm2.20 mm
R. K. Rajput, A Textbook of IC Engines, Example 11.7 (also Mathur & Sharma Example 11.2)compressible; actual velocity, velocity coefficient 0.8; jet depression 0.75 × throatThroat diameter3.53 cm (Rajput), 3.526 cm (Mathur & Sharma)3.526 cm
Jet diameter2.34 mm (Mathur & Sharma)2.34 mm
R. K. Rajput, A Textbook of IC Engines, Example 11.8compressible; 85 m/s is the theoretical velocity; emulsion tube 0.4 × choke diameterChoke diameter29.61 mm29.61 mm
Jet diameter1.68 mm1.68 mm
H. N. Gupta, Fundamentals of IC Engines, Example 9.4incompressibleThroat depression0.054 bar0.0541 bar
Jet diameter1.953 mm1.953 mm
R. K. Rajput, A Textbook of IC Engines, Example 11.3incompressibleJet diameter1.32 mm1.322 mm
Mathur & Sharma, Internal Combustion Engine, Example 11.8 (same numbers: Mustansiriyah University lecture, Example 1)incompressible, air density 1.2 kg/m³A/F, lip neglected13.213.188
A/F, with lip13.22 (13.223)13.223
Minimum air velocity7.83 m/s7.830 m/s
H. N. Gupta, Fundamentals of IC Engines, Example 9.6incompressible, air density 1.2 kg/m³A/F, lip neglected15.7515.749
A/F, with lip15.7815.780
Minimum air velocity7.0 m/s7.004 m/s
H. N. Gupta, Fundamentals of IC Engines, Example 9.7textbook atmosphere: T = 22 − 0.0065h °C, h = 19,200 log₁₀(1.013/p)A/F at 4,000 m12.1112.111

Two things to watch in the books. Gupta's Example 9.1 and Rajput's Example 11.7 call 0.8 a velocity coefficient and give the actual air speed. The ideal speed used in the energy equation is then 90/0.8 = 112.5 m/s, and the area comes from the actual speed. Mathematically that is the same as a discharge coefficient of 0.8 on the ideal flow, so pick "Actual" for those problems. Rajput's Example 11.8 instead gives the theoretical speed, 85 m/s, and puts the discharge coefficient on the area. The FOSSEE companion to Mathur and Sharma notes that the book's printed answers to Examples 11.3 and 11.4 are wrong, so those two are left out here.

Why a simple carburettor richens as the air flow rises

Mathur and Sharma's Example 11.8 carburettor (20 mm throat, 1.25 mm jet, 5 mm lip) supplies nothing until the air flow reaches 0.151 kg/min, a throat speed of 7.83 m/s. Just above that the mixture is extremely lean, because the lip head eats most of the depression. As the flow rises the lip matters less and A/F falls towards 13.19, its value with the lip neglected. At the example's 0.07 bar depression it is 13.223 ignoring compressibility and 12.724 including it.

012313151820air flow (kg/min)incompressiblecompressiblelip neglected 13.19

Compressibility pushes the same way. For a given air mass flow the compressible throat needs a deeper depression than the incompressible one, and the fuel, a liquid, responds to that full depression. So the compressible curve sits below the incompressible one and the gap grows with flow. This drift from lean at low flow to rich at high flow is the main reason real carburettors are more than a venturi and a jet.

Altitude and the air-fuel ratio

At the same throttle position and venturi depression the fuel flow doesn't change, because the fuel's density and the lip don't. The air flow falls with the square root of the air density:

The calculator uses the International Standard Atmosphere for the troposphere (the US Standard Atmosphere 1976 constants: 288.15 K, 101,325 Pa, 6.5 K/km, exponent g₀M/(R*L) = 5.2559). Indian textbooks use a simpler formula, with the sea-level temperature and pressure given in the problem:

Gupta's Example 9.7, 14.7:1 at sea level and 22 °C taken to 4,000 m, gives 12.11 by the textbook formula (published 12.11). The ISA gives 12.02, because its sea level is 15 °C and its pressure falls slightly differently. Either way A/F falls by about 18% at 4,000 m, so the engine runs rich. That is why the list of carburettor systems in IC engine notes includes altitude compensation, "required to adjust the fuel flow to changes in air density".

0100020003000400012131415altitude (m)A/F, same throttle and depression

How much air does an engine draw?

A four-stroke engine fills each cylinder once every two revolutions (nR = 2), a two-stroke once every revolution (nR = 1). The volumetric efficiency ηv says how full:

The 1.2 L example engine at 5,500 rpm and ηv = 0.8 draws 0.044 m³/s (158 m³/h, 93 CFM), 52.8 g/s of air at 1.2 kg/m³. The CFM rule used for American carburettors is the same equation in inches and minutes: a cubic inch is 1/1,728 ft³, and a four-stroke takes in its displacement every two revolutions, so 2 × 1,728 = 3,456. With twin carburettors or barrels sharing the flow, divide by their number before sizing one.

What a real carburettor adds

This is the elementary carburettor of the textbooks: one venturi and one jet. On its own it would run lean at light load and rich at full load, as the chart shows. Mustansiriyah University's IC engine notes list what production carburettors add to correct it: a choke for cold starting, an idle circuit for a nearly closed throttle, a main metering system "compensated to provide essentially constant lean or stoichiometric mixture over the 20% to 80% air flow range" (air bleeds and compensating jets), a power valve or economiser that enriches near full throttle, altitude compensation and an accelerator pump for sudden throttle opening.

So use the numbers here as the first-pass size of the venturi and the main jet, the way the textbook problems do. Production jets are calibrated on a flow bench and in the engine. Their sizes are usually stamped as maker-specific flow numbers, not drill diameters, so this page gives none.

What this calculator does not cover

  • The compensating circuits (air bleed, idle, power valve, accelerator pump) and the emulsion of fuel with bleed air in the well.
  • Pulsating flow. A single-cylinder engine draws air in pulses, so the instantaneous throat velocity peaks well above the mean.
  • Air-cleaner pressure drop, which several textbooks add as a separate problem (it lowers the throat pressure and richens the mixture).
  • Variable-venturi (constant-depression) carburettors such as SU or CV types, and fuel injection.
  • Fuel evaporation and carburettor icing in the throat.
Learn engine simulation

Engine teams model intake air flow, volumetric efficiency and mixture preparation in 1D tools like GT-POWER, and the in-cylinder spray and mixing in CFD. Skill-Lync's IC engine courses teach both.

Frequently asked questions

How do you calculate the venturi throat diameter of a carburettor?

Find the air flow, pick a throat velocity or depression, then use continuity: throat area = air flow ÷ (Cd × air density × velocity). For the compressible answer, take the throat density from the isentropic relation. Gupta's Example 9.1, 5 kg/min at 90 m/s with Cd 0.8, gives 32.51 mm.

How do you find the fuel jet diameter of a simple carburettor?

The fuel sees the throat depression minus the head needed to lift it over the nozzle lip, ρ_f g z. Jet area = fuel flow ÷ (Cd_f × √(2 ρ_f × that net depression)). On the 1.2 L example (13:1, 5 mm lip, Cd_f 0.7) the main jet comes out at 1.47 mm across.

What is the nozzle lip in a carburettor?

The nozzle tip sits a few millimetres above the float-chamber fuel level, so fuel can't spill when the engine stops. The air must first create a depression of ρ_f g z to lift fuel to the tip. With a 5 mm lip, petrol at 750 kg/m³ and air at 1.2 kg/m³, nothing flows below 7.83 m/s.

Should I include the compressibility of air in carburettor problems?

For a first pass, no: at usual throat speeds the difference is a few per cent. The 1.2 L example's throat depression is 7.86 kPa ignoring compressibility and 8.65 kPa with it, and the jet changes by 2.4%. If a problem gives cp and γ, it expects the compressible method.

Why does a simple carburettor give a richer mixture as the air flow rises?

Just above the flow where fuel starts, the lip head takes most of the depression, so the mixture is very lean. As the flow rises the lip matters less and A/F falls towards its lip-free value. Compressibility then makes it richer still. Real carburettors add compensating jets and air bleeds to flatten this.

How does altitude change a carburettor's air-fuel ratio?

At the same throttle and venturi depression the fuel flow is unchanged but the air flow falls with the square root of air density. A/F therefore falls as √(ρ_h/ρ_0): a 14.7 mixture at sea level becomes 12.02 at 4,000 m in the standard atmosphere, so the engine runs rich. Gupta's textbook formula gives 12.11.

Related on Skill-Lync

Sources

  • H. N. Gupta, Fundamentals of Internal Combustion Engines (PHI), ch. 9, Examples 9.1, 9.4, 9.6 and 9.7, as reproduced with solutions in the FOSSEE Textbook Companion (IIT Bombay): the compressible relation "p2 = p1(1 − C2²/(Cva² 2 Cp T1))^(γ/(γ−1))", "da2 = da1 (p2/p1)^(1/γ)", the jet depression "0.75" of the venturi's, and the published answers 3.251 cm, 2.2 mm, 0.054 bar, 1.953 mm, 15.75, 15.78, 7.0 m/s and 12.11. Read 22 Nov 2026.
  • R. K. Rajput, A Textbook of Internal Combustion Engines (Laxmi), ch. 11, Examples 11.3, 11.7 and 11.8, FOSSEE Textbook Companion: jet 1.32 mm; throat 3.53 cm; choke 29.61 mm and jet 1.68 mm with an emulsion tube of "0.4" the choke diameter. Read 22 Nov 2026.
  • M. L. Mathur and R. P. Sharma, Internal Combustion Engine (Dhanpat Rai), ch. 11, Examples 11.1, 11.2, 11.7 and 11.8, FOSSEE Textbook Companion: throat 3.25 cm and 3.526 cm, jet 2.34 mm; A/F 13.2 with the lip neglected, 13.223 with it, minimum velocity 7.83 m/s; altitude by "19200 log10(1.013/P)" and "ts − 0.0065h". Read 22 Nov 2026.
  • Mustansiriyah University, IC engines lecture, ch. 5 "Fuel metering for S.I. engines": the air and fuel flow equations (5-1, 5-4), "AF_alti/AF_s = √(ρ_alti/ρ_s)" (5-9), the auxiliary systems of a carburettor, and Example 1 (A/F 13.22 with the lip, 13.2 without). Read 22 Nov 2026.
  • US Standard Atmosphere 1976 (identical to the ICAO standard atmosphere below 11 km), the troposphere constants as listed in Barometric formula: Pb 101,325 Pa, Tb 288.15 K, lapse rate −6.5 K/km, g₀ 9.80665 m/s², M 28.9644 kg/kmol, R* 8,314.32 J/(kmol K); cross-checked with NASA Glenn's Earth Atmosphere Model and the Engineering ToolBox table (1.225 kg/m³ at sea level, 8.988 × 10⁴ Pa at 1,000 m). Read 22 Nov 2026.
  • NIST, SP 811 Appendix B.9: millimetre of mercury, conventional = 133.3224 Pa; millimetre of water, conventional = 9.80665 Pa; ft³/min = 4.719474 × 10⁻⁴ m³/s.
  • Hindustan Petroleum, MS and HSD BS-VI specifications: petrol density 720-775 kg/m³ at 15 °C.
  • J. B. Heywood, Internal Combustion Engine Fundamentals (McGraw-Hill), ch. 7: the elementary carburettor model and the compensating systems added to it, as summarised on Skill-Lync's carburetor component page.
  • Skill-Lync, scripts/verify/carburettor.py: works every quantity a different way (the compressible velocity by integrating v dv = −dp/ρ along the isentrope, the choking point by maximising the mass flux, every diameter and throat pressure by bisection on the forward model, the ISA by integrating the hydrostatic equation) over the presets and 79 random and edge cases (all three throat inputs, all four depression units, altitude 0 to 4,000 m, below-lip, choked and supersonic inputs). The page compares 1,483 numbers with it when it is built.
Free counselling

From the carburettor to engine simulation.

Air flow, mixture and volumetric efficiency are still the core of engine calibration work, now done in GT-POWER and CFD. A Skill-Lync counsellor can tell you which IC engine or CFD course fits where you are now.

Talk to a course counsellor

Free. We call you back, usually the same day.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.