Battery cell comparison
A battery cell is the single sealed unit a battery is built from, and its datasheet tells you what it can do. This page puts 20 real cells side by side, as their makers printed them: 18650 and 21700 lithium-ion, A123's 26650 and EVE's 33140, EVE's 105-314 Ah prismatic LFP cells, Kokam pouch cells, Toshiba's SCiB (LTO) and two sodium-ion cells. You get capacity, voltage, mass, size, continuous current and cycle life, plus the derived Wh, Wh/kg, Wh/L and C-rate.
Filter by format and chemistry, sort by any column, and open a cylindrical cell straight in the battery pack calculator to size a pack with it. Every number comes from the maker's own datasheet, linked on each row; energy, Wh/kg, Wh/L and C-rates are worked out from those values and checked by a separate script.
20 cells · 3 formats · 4 chemistries · datasheets read 22 Nov 2026 · Updated 22 Nov 2026
20 cells shown.
| Cell | Chemistry | Voltage nom (range) V | Capacity Ah | Energy Wh | Mass g | Size | Wh/kg | Wh/L | Max cont. A (C) | Cycle life | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| NVPF18650-B3TIAMAT · Cylindrical 18650 | Sodium-ion, NVPF cathode | 3.72 to 4.2 | 1 | 3.7 | 35 | Ø18.3 × 65 mm | 106 | 216 | 15 (15C) | – | DatasheetSize a pack |
| US18650VTC6Murata (Sony spec sheet) · Cylindrical 18650 | Li-ion, nickel cobalt oxide (Murata SDS) | 3.62 to 4.25 | 3.12min 3 | 11.2 | 46.6 | Ø18.5 × 65.2 mm | 241 | 641 | 30 (9.6C) | 300 | DatasheetSize a pack |
| NCR18650BPanasonic (Sanyo) · Cylindrical 18650 | Li-ion (cathode not named) | 3.6– to 4.2 | 3.35min 3.2 | 12.1 | 48.5 | Ø18.5 × 65.3 mm | 249 | 687 | – | – | Datasheet |
| INR18650-35ESamsung SDI · Cylindrical 18650 | Li-ion (cathode not named) | 3.62.65 to 4.2 | 3.35 | 12.1 | 50 | Ø18.55 × 65.25 mm | 241 | 684 | 8 (2.4C) | 500 | DatasheetSize a pack |
| INR-18650-P28AMolicel · Cylindrical 18650 | Li-ion (cathode not named) | 3.62.5 to 4.2 | 2.8min 2.7 | 10.1 | 46 | Ø18.6 × 65.2 mm | 219 | 569 | 35 (12.5C) | – | DatasheetSize a pack |
| INR18650 MJ1LG Chem (LG Energy Solution) · Cylindrical 18650 | Li-ion (cathode not named) | 3.6352.5 to 4.2 | 3.5min 3.35 | 12.7 | 49 | Ø18.65 × 65.3 mm | 260 | 713 | 10 (2.9C) | 400 | DatasheetSize a pack |
| INR21700-40TSamsung SDI · Cylindrical 21700 | Li-ion (cathode not named) | 3.62.5 to 4.2 | 4 | 14.4 | 70 | Ø21.22 × 70.3 mm | 206 | 579 | 35 (8.8C) | 250 | DatasheetSize a pack |
| INR21700-50ESamsung SDI · Cylindrical 21700 | Li-ion (cathode not named) | 3.632.5 to 4.2 | 4.9 | 17.8 | 69.5 | Ø21.25 × 70.8 mm | 256 | 708 | 9.8 (2C) | 500 | DatasheetSize a pack |
| INR21700-M50LTLG Chem (LG Energy Solution) · Cylindrical 21700 | Li-ion (cathode not named) | 3.692.5 to 4.2 | 18.2 | 68.2 | Ø21.44 × 70.65 mm | 267 | 714 | 14.4 (3C) | 1,000 | Datasheet | |
| INR-21700-P45BMolicel · Cylindrical 21700 | Li-ion (cathode not named) | 3.62.5 to 4.2 | 4.5min 4.35 | 16.2 | 70 | Ø21.55 × 70.15 mm | 231 | 633 | 45 (10C) | 500 | DatasheetSize a pack |
| ANR26650M1-BA123 Systems (Lithium Werks) · Cylindrical 26650 | LFP (A123 'Nanophosphate') | 3.3– to 3.6 | 2.5min 2.4 | 8.3 | 76 | Ø26 × 65 mm | 109 | 239 | 50 (20C) | 1,000 | DatasheetSize a pack |
| IFR33140EVE Energy · Cylindrical 33140 | LFP class (not named on the sheet) | 3.22.5 to 3.65 | 15min 14.5 | 48 | 266 | Ø33.3 × 140.5 mm | 180 | 392 | 30 (2C) | 2,500 | DatasheetSize a pack |
| SCiB 23Ah cell (high-energy type)Toshiba · Prismatic | LTO anode (SCiB) | 2.3– to – | 23 | 52.9 | 550 | 116 × 22 × 106 mm | 96 | 196 | – | – | Datasheet |
| LF105EVE Energy · Prismatic | LFP | 3.22.5 to 3.65 | 105 | 336 | 1,980 | 130.3 × 36.4 × 200.5 mm | 170 | 354 | – | 4,000 | Datasheet |
| LF304EVE Energy · Prismatic | LFP class (not named on the sheet) | 3.22.5 to 3.65 | 304 | 972.8 | 5,450 | 173.7 × 71.7 × 207.2 mm | 178 | 377 | – | 4,000 | Datasheet |
| MB31EVE Energy · Prismatic | LFP | 3.22.5 to 3.65 | 314 | 1,004.8 | 5,600 | 173.7 × 71.7 × 207.2 mm | 179 | 389 | – | 8,000 | Datasheet |
| LF280KEVE Energy · Prismatic | LFP | 3.22.5 to 3.65 | 280min 280 | 896 | 5,220 | 173.6 × 72 × 207.5 mm | 172 | 345 | – | 6,000 | Datasheet |
| N162Ah (cell model NA162P100A)HiTHIUM · Prismatic | Sodium-ion, NFPP / hard carbon | 2.821.5 to 3.3 | 162 | 456.8 | 4,600 | 174.7 × 71.7 × 207.1 mm | 99 | 176 | – | 20,000 | Datasheet |
| SLPB 100216216HKokam · Pouch | Li-ion (cathode not named) | 3.72.7 to 4.2 | 40 | 148 | 1,100 | 215 × 10.7 × 220 mm | 135 | 292 | 200 (5C) | 800 | Datasheet |
| SLPB 80460330HKokam · Pouch | Li-ion (cathode not named) | 3.72.7 to 4.2 | 100 | 370 | 2,700 | 455 × 8.1 × 325 mm | 137 | 309 | 500 (5C) | 800 | Datasheet |
Energy = nominal voltage × nominal (or typical) capacity. Wh/L uses the cell's outer envelope from the datasheet dimensions (a cylinder for round cells), so it is the cell's own density before any packing gaps. Cycle-life figures are not comparable across makers: each is measured at its own depth of discharge, rate, temperature and end-of-life capacity (the conditions are in the full table further down, and in the datasheet). "–" means the datasheet does not print it.
What is a battery cell?
A battery cell is the smallest working unit of a battery: a cathode and an anode separated by a porous film, soaked in electrolyte and sealed in a metal can or a foil pouch. The chemistry sets its voltage (3.6-3.7 V for most lithium-ion, 3.2 V for LFP, 2.3 V for LTO) and the size sets how many amp-hours it holds.
Cells are the bricks. A module is a group of cells welded together with busbars and sensing wires; a pack is modules plus the battery management system (BMS), cooling and an enclosure. The cells in this table store anywhere from 3.7 Wh (TIAMAT NVPF18650-B3) to 1,005 Wh (MB31), which is why one 40 kWh pack can hold 2,254 small cells or 214 large ones.
Think of the datasheet as the cell's contract: voltage limits you must not cross, the current it can deliver continuously, how much it weighs, how big it is, and how long it lasts under one specific test. Skill-Lync compiled the 20 datasheets on this page on 22 Nov 2026, so you can compare those contracts side by side instead of trusting a seller's listing.
What do 18650, 21700 and 26650 mean?
The number is the cell's size: the first two digits are the diameter in millimetres and the last three the length in tenths of a millimetre. An 18650 is 18 mm × 65.0 mm, a 21700 is 21 × 70.0 mm, a 26650 is 26 × 65.0 mm, a 33140 is 33 × 140 mm and a 4680 is 46 × 80 mm. Real cells run slightly over the name.
Panasonic's NCR18650B is up to 18.5 × 65.3 mm and Samsung's 50E (a 21700) up to 21.25 × 70.8 mm, as printed. The 21700 holds 1.43 times the volume of the 18650 and stores 1.47 times the energy (17.79 vs 12.06 Wh), so a pack needs about a third fewer cells, welds and holders for the same kWh. That saving is a big part of why EV and power-tool makers moved up from the 18650.
No 46xx cell (4680, 4695, 46950) is in the table: we could not find a public datasheet from any maker for one, only marketing pages. Tesla, BYD and CATL publish no cell datasheets for their EV cells either (see below).
Cylindrical vs prismatic vs pouch cells: what is the difference?
Cylindrical cells are wound into a steel can; prismatic cells are stacked or wound into a rectangular aluminium case; pouch cells are sealed in a soft laminated foil. Cylindrical cells are small and made in huge volumes, prismatic cells are large and pack tightly, and pouch cells have the lightest casing but need a frame to hold and press them.
Round cells waste floor space. Cells on a square grid fill only
of the area they sit on (about 90.7% on a tighter hexagonal grid), plus whatever gap the holder needs. A prismatic cell fills its box. That is why Wh/L on this page is the cell's own figure: the pack's figure is always lower, and lower still for round cells.
Big cells also come in big steps. EVE's LF280K is 896 Wh by itself, and EVE quotes the MB31's thickness under a 300 kgf clamp because prismatic LFP cells swell as they charge. The SLPB 80460330H pouch cell is 455 × 325 mm and only 8.1 mm thick, rated for 500 A continuous.
Which battery cell has the highest energy density?
In this table, the 3.6-3.7 V lithium-ion cylindrical cells lead: LG INR21700-M50LT at 267 Wh/kg, then LG INR18650 MJ1 at 260 and Samsung INR21700-50E at 256 Wh/kg. Prismatic LFP cells give 170 to 179 Wh/kg, sodium-ion 99 to 106 and LTO 96 Wh/kg.
Two cautions. The INR21700-M50LT sheet is marked "Tentative" and lists its mass as still to be determined, so its lead is provisional. And mass is printed as a maximum on some sheets (Samsung, LG, Panasonic) and as typical or nominal on others (Molicel P28A, EVE, Kokam), which can move Wh/kg by a percent or two. Toshiba prints 96 Wh/kg and 202 Wh/L for the SCiB 23 Ah; our 96 Wh/kg matches, and our 196 Wh/L is lower because we use the full 116 × 22 × 106 mm envelope.
Energy density by chemistry, from these datasheets
| Chemistry | Cells | Nominal V | Wh/kg | Wh/L | Cycle life printed* |
|---|---|---|---|---|---|
| Li-ion 3.6-3.7 V | 11 | 3.60 to 3.70 | 135 to 267 | 292 to 714 | 250 to 1,000 |
| LFP | 6 | 3.20 to 3.30 | 109 to 180 | 239 to 392 | 1,000 to 8,000 |
| LTO | 1 | 2.30 | 96 | 196 | – |
| Sodium-ion | 2 | 2.82 to 3.70 | 99 to 106 | 176 to 216 | 20,000 |
* Each maker's own test: depth of discharge, rate, temperature and end-of-life capacity all differ (16 of 20 sheets give a number). Samsung's 40T, for example, is rated at 250 cycles to 60% at a 35 A discharge; EVE's MB31 at 8,000 cycles to 70%. Read the conditions in the full table.
Why "Li-ion 3.6-3.7 V" and not NMC or NCA? None of the Panasonic, Samsung, LG, Molicel or Kokam datasheets here names the cathode. A 3.6-3.7 V nominal voltage with a 4.2 V charge limit points to a nickel-based layered-oxide cathode (the NMC/NCA family) rather than LFP, and Murata's safety data sheet for the VTC6 lists "Lithium Nickel Cobalt Oxides". We group them by what the sheets do say. For LFP against NMC in depth, read LFP vs NMC battery; for sodium-ion in India, sodium-ion batteries in India.
Why does a high-current cell store less energy?
To deliver high current, a cell uses thinner electrode coatings and more current collector foil, which carry current easily but leave less room for active material. So power cells give up energy density. The datasheets show it: Molicel's INR-18650-P28A is rated 35 A continuous (12.5C) at 219 Wh/kg, while LG's INR18650 MJ1 allows 10 A (2.9C) at 260 Wh/kg.
The same split shows in 21700s: Molicel INR-21700-P45B 10C at 231 Wh/kg against Samsung INR21700-50E 2C at 256 Wh/kg. A123's LFP 26650 is the extreme: 20C continuous at only 109 Wh/kg. Pick by the job: a drone or power tool is limited by current, an EV or a storage system mostly by energy.
Read current ratings carefully. Samsung rates the 40T at 35 A, or 45 A with an 80 °C cut-off; Sony's VTC6 sheet gives 15 A, or 30 A "with 80 °C temperature cut"; LG's M50LT allows 3C only between 10 and 25 °C. The table shows the headline figure, and the full table and the datasheet give the conditions.
How do you read a battery cell datasheet?
Find six numbers and the conditions behind each: nominal voltage, capacity (typical or minimum), mass (typical or maximum), dimensions, maximum continuous current, and cycle life. Everything else on this page comes from those values. Energy, density and C-rate are
Worked through for the Samsung INR21700-50E (3.63 V nominal, 4.9 Ah minimum, 69.5 g maximum, Ø21.25 × 70.8 mm maximum, 9.8 A continuous):
Things that trip people up:
- Typical vs minimum capacity. Panasonic prints a typical 3.35 Ah and a rated minimum 3.2 Ah for the NCR18650B; Samsung prints only the minimum. Size a pack on the minimum if it must meet a number (the pack calculator shows both).
- AC impedance is not DC resistance. The 1 kHz figure (for example 14 mΩ for the INR21700-50E) misses the slower parts of the cell's resistance, so heat estimates from it are a lower bound.
- Charge limits are tighter than discharge limits. The INR21700-50E charges at 4.9 A at most (1C) but discharges at 9.8 A, and most sheets allow charging only from 0 °C.
- Draft documents. The VTC6 and M50LT sheets are marked tentative, the Molicel P45B sheet is version 0.2, and the EVE LF280K sheet here is the January 2021 revision A. Check for a newer revision before you design.
How many cells does a 40 kWh battery pack need?
Divide the pack voltage by the cell's nominal voltage for the cells in series (S), then add parallel strings (P) until the energy is met. For a 40 kWh pack at about 350 V, that is 98S23P = 2,254 Samsung INR21700-50E cells weighing 156.7 kg, or 107S2P = 214 EVE LF105 cells.
The table runs the same rule as the battery pack calculator for every cell (S within two of the nearest whole number and within 3% of 350 V, fewest cells wins). Look at the kWh column: with big cells you cannot hit 40 kWh exactly. One string of 107 LF280K cells is already 95.9 kWh, and LF105 cells jump from one string (36 kWh) to two (71.9 kWh). For a single string of 3.2 V cells at 350 V to make 40 kWh, each cell would need about 115 Ah. The masses are cells only; modules, cooling and the enclosure come on top.
| Cell | S × P | Cells | Pack V (nominal) | kWh | Cell mass, kg |
|---|---|---|---|---|---|
| INR18650 MJ1 (Li-ion 3.6-3.7 V) | 96S33P | 3,168 | 349 | 40.3 | 155.2 |
| INR21700-50E (Li-ion 3.6-3.7 V) | 98S23P | 2,254 | 355.7 | 40.09 | 156.7 |
| NCR18650B (Li-ion 3.6-3.7 V) | 95S35P | 3,325 | 342 | 40.1 | 161.3 |
| US18650VTC6 (Li-ion 3.6-3.7 V) | 99S36P | 3,564 | 356.4 | 40.03 | 166.1 |
| INR18650-35E (Li-ion 3.6-3.7 V) | 95S35P | 3,325 | 342 | 40.1 | 166.3 |
| INR-21700-P45B (Li-ion 3.6-3.7 V) | 95S26P | 2,470 | 342 | 40.01 | 172.9 |
| INR-18650-P28A (Li-ion 3.6-3.7 V) | 97S41P | 3,977 | 349.2 | 40.09 | 182.9 |
| INR21700-40T (Li-ion 3.6-3.7 V) | 96S29P | 2,784 | 345.6 | 40.09 | 194.9 |
| IFR33140 (LFP) | 107S8P | 856 | 342.4 | 41.09 | 227.7 |
| SLPB 100216216H (Li-ion 3.6-3.7 V) | 93S3P | 279 | 344.1 | 41.29 | 306.9 |
| ANR26650M1-B (LFP) | 108S45P | 4,860 | 356.4 | 40.1 | 369.4 |
| NVPF18650-B3 (Sodium-ion) | 95S114P | 10,830 | 351.5 | 40.07 | 379.1 |
| SCiB 23Ah cell (high-energy type) (LTO) | 152S5P | 760 | 349.6 | 40.2 | 418 |
| LF105 (LFP) | 107S2P | 214 | 342.4 | 71.9 | 423.7 |
| SLPB 80460330H (Li-ion 3.6-3.7 V) | 93S2P | 186 | 344.1 | 68.82 | 502.2 |
| LF280K (LFP) | 107S1P | 107 | 342.4 | 95.87 | 558.5 |
| N162Ah (cell model NA162P100A) (Sodium-ion) | 122S1P | 122 | 344 | 55.73 | 561.2 |
| LF304 (LFP) | 107S1P | 107 | 342.4 | 104.09 | 583.2 |
| MB31 (LFP) | 107S1P | 107 | 342.4 | 107.51 | 599.2 |
INR21700-M50LT is left out: its sheet gives energy (18.2 Wh) but no Ah capacity. Lightest: INR18650 MJ1, 155.2 kg of cells.
What about Tesla 4680, BYD Blade and other cells with no datasheet?
Tesla, BYD and CATL publish no cell datasheets for their EV cells, so they are not in the table. What their makers do publish are pack or system figures and claims, which are not comparable with a datasheet's cell numbers.
- CATL Qilin (CTP 3.0), 23 Jun 2022: "energy density of up to 255 Wh/kg" for ternary (nickel) battery systems and 160 Wh/kg for LFP systems, with "volume utilization efficiency of 72%". These are pack-level numbers; a 160 Wh/kg LFP pack implies cells above it, consistent with the 170 to 179 Wh/kg EVE cells here.
- Ola Electric 4680 "Bharat cell", press release 15 Aug 2024: "lithium-ion cell packs possess five times more energy (275 Wh/kg) than the 2170 form-factor cells", a "wider operating window" and "more than 1,000 charge cycles". No datasheet. The best 21700 sheet here is INR21700-M50LT at 267 Wh/kg, so "five times more" cannot refer to Wh/kg.
- Tesla 4680 and 2170, BYD Blade: no maker datasheet we could find. Figures quoted online come from teardowns and press coverage.
Full datasheet details and conditions
Everything the table above leaves out: voltage limits, the capacity and mass basis, charge and pulse currents, impedance, the cycle-life test, temperature ranges and the exact document used.
| Cell | Charge to / cut-off | Capacity and mass basis | Max charge | Pulse | Impedance | Cycle life (conditions) | Temperature | Document |
|---|---|---|---|---|---|---|---|---|
| NVPF18650-B3TIAMATSodium-ion, NVPF cathode | 4.2 / 2 V | Typical 1 Ah / 3.5 Wh. Mass 35 ± 2 g. | 10 A (10C) | 35 A | 15 mΩ | Shown as a graph only (2C charge, 5C discharge). | Charge 0 to 60 °C; discharge -30 to 60 °C | TIAMAT product datasheet NVPF18650-B3 (undated, 2023-09 file)on the maker's site |
| US18650VTC6Murata (Sony spec sheet)Li-ion, nickel cobalt oxide (Murata SDS) | 4.25 / 2 V | Nominal 3.12 Ah, rated 3.0 Ah at 0.2C to 2.0 V. Mass is typical ±1.5 g. | 5 A (1.6C) | – | 18 mΩ (printed as 8 to 18 mΩ) | 300: At least 1.6 Ah left after 300 cycles at a 10 A discharge (not an 80% criterion). | Charge 0 to 60 °C; discharge -20 to 60 °C | Sony product specification US18650VTC6, ver. 0.1 tentative (30 Jun 2015)maker's sheet, copy hosted elsewhere |
| NCR18650BPanasonic (Sanyo)Li-ion (cathode not named) | 4.2 / – V | Typical 3.35 Ah, minimum 3.25 Ah at 25 °C, rated minimum 3.2 Ah at 20 °C. Mass is a maximum. | – | – | – | Shown as a graph only (0.5C charge, 1C discharge, 25 °C). | Charge 0 to 45 °C; discharge -20 to 60 °C | NCR18650B product sheet, version 13.11 R1 (2012)maker's sheet, copy hosted elsewhere |
| INR18650-35ESamsung SDILi-ion (cathode not named) | 4.2 / 2.65 V | Minimum 3.35 Ah at 0.2C (only a minimum is printed); at least 3.25 Ah at 1C. Mass is a maximum. | 2 A (0.6C) | 13 A | 35 mΩ (maximum) | 500: To 60% of capacity, 1,020 mA charge, 3,400 mA discharge to 2.65 V. | Charge 0 to 45 °C; discharge -10 to 60 °C | Samsung SDI specification INR18650-35E, ver. 1.1 (9 Jul 2015)maker's sheet, copy hosted elsewhere |
| INR-18650-P28AMolicelLi-ion (cathode not named) | 4.2 / 2.5 V | Typical 2.8 Ah, minimum 2.7 Ah. Mass is typical. | 8.4 A (3C) | – | 20 mΩ (maximum) | Shown as a graph only (10 A and 20 A discharge). | Charge 0 to 60 °C; discharge -40 to 60 °C | Molicel product data sheet INR-18650-P28A (undated)maker's sheet, copy hosted elsewhere |
| INR18650 MJ1LG Chem (LG Energy Solution)Li-ion (cathode not named) | 4.2 / 2.5 V | Nominal 3.5 Ah, minimum 3.35 Ah at 0.2C. Mass is a maximum. | 3.4 A (0.96C) | – | 40 mΩ (maximum) | 400: To 80% of the minimum capacity, 1.5 A charge, 4 A discharge to 2.5 V. | Charge 0 to 45 °C; discharge -20 to 60 °C | LG Chem product specification LRB-PS-CY3500_MJ1, rev. 1 (30 Jun 2016)maker's sheet, copy hosted elsewhere |
| INR21700-40TSamsung SDILi-ion (cathode not named) | 4.2 / 2.5 V | Minimum 4.0 Ah at 0.2C (only a minimum is printed); at least 3.9 Ah at 10 A. Mass is a maximum. | 6 A (1.5C) | – | 12 mΩ (maximum) | 250: To 60% at a 35 A discharge (power-tool cell), 6 A charge. | Charge 0 to 45 °C; discharge -20 to 60 °C | Samsung SDI specification INR21700-40T, ver. 0.0 (Dec 2017)maker's sheet, copy hosted elsewhere |
| INR21700-50ESamsung SDILi-ion (cathode not named) | 4.2 / 2.5 V | Minimum 4.9 Ah at 0.2C (only a minimum is printed); at least 4.753 Ah at 1C. Mass is a maximum. | 4.9 A (1C) | 14.7 A | 14 mΩ (printed as ≤ 14.0 ± 5.0 mΩ) | 500: To 80% of rated capacity, 0.5C charge, 1C discharge to 2.5 V. | Charge 0 to 45 °C; discharge -20 to 60 °C | Samsung SDI specification INR21700-50E, V1.0 (5 Nov 2019)maker's sheet, copy hosted elsewhere |
| INR21700-M50LTLG Chem (LG Energy Solution)Li-ion (cathode not named) | 4.2 / 2.5 V | Rated in energy: 18.2 Wh nominal, 17.6 Wh minimum; 1C defined as 4.8 A, no Ah printed. Mass 68.2 ± 1.0 g, not final. Sheet marked tentative. | 3.4 A (0.7C) | – | 15 mΩ (15 ± 6 mΩ) | 1,000: To 80% of energy, charged only to 4.10 V and discharged to 2.85 V at 0.5C. | Charge 0 to 45 °C; discharge -20 to 55 °C | LG Chem product specification 2020-LSD-MBD-b00090, rev. 0 tentative (17 Sep 2020)maker's sheet, copy hosted elsewhere |
| INR-21700-P45BMolicelLi-ion (cathode not named) | 4.2 / 2.5 V | Typical 4.5 Ah, minimum 4.35 Ah at 0.9 A. Mass is a maximum. | 9 A (2C) | – | 8 mΩ (maximum) | 500: To 80% at 4.5 A cycling, 75% at 10 A, 70% at 20 A, 23 °C. | Charge 0 to 60 °C; discharge -40 to 60 °C | Molicel cell specification INR21700P45B-01, ver. 0.2 (undated)maker's sheet, copy hosted elsewhere |
| ANR26650M1-BA123 Systems (Lithium Werks)LFP (A123 'Nanophosphate') | 3.6 / – V | Nominal 2.5 Ah, minimum 2.4 Ah at 0.5C. | 10 A (4C) | 120 A | 6 mΩ (typical) | 1,000: More than 1,000 cycles at a 20 A discharge, 100% DoD; end-of-life not stated. | Charge -30 to 55 °C; discharge -30 to 55 °C | A123 data sheet MD100113-02 (2012)maker's sheet, copy hosted elsewhere |
| IFR33140EVE EnergyLFP class (not named on the sheet) | 3.65 / 2.5 V | Average 15 Ah, minimum 14.5 Ah at 0.33C. Mass 266 g (typical). | 15 A (1C) | – | 3 mΩ (maximum) | 2,500: To 75% at 25 °C, 0.5C charge, 1C discharge; 1,000 cycles to 70% at 45 °C. | Charge 0 to 55 °C; discharge -20 to 60 °C | EVE specification PBRI-C33-D06-03, ver. A (10 Jul 2022)maker's sheet, copy hosted elsewhere |
| SCiB 23Ah cell (high-energy type)ToshibaLTO anode (SCiB) | – / – V | Rated 23 Ah. Mass approx. 550 g. Toshiba prints 96 Wh/kg and 202 Wh/L. | – | – | – | Not given for this cell (the catalogue's 20,000-cycle figure is for the 20 Ah cell). | – | Toshiba SCiB catalogue (as of Apr 2025)on the maker's site |
| LF105EVE EnergyLFP | 3.65 / 2.5 V | Minimum 105 Ah at 0.5C (only a minimum is printed). Mass 1,980 ± 60 g. | – | – | 0.32 mΩ (typical ± 0.05) | 4,000: To 80% at 25 °C, 0.5C/0.5C; 2,000 cycles at 45 °C. | Charge 0 to 65 °C; discharge -35 to 65 °C | EVE product specification PBRI-LF105-D06-01, ver. D (8 Nov 2022)maker's sheet, copy hosted elsewhere |
| LF304EVE EnergyLFP class (not named on the sheet) | 3.65 / 2.5 V | 304 Ah nominal at 0.5C (972.8 Wh). Mass 5,450 ± 164 g. | – | – | 0.16 mΩ (typical ± 0.05) | 4,000: To 80% at 25 °C; 2,000 cycles at 45 °C. | Charge -10 to 65 °C; discharge -35 to 65 °C | EVE product specification PBRI-LF304-D06-01, ver. E (31 May 2023)maker's sheet, copy hosted elsewhere |
| MB31EVE EnergyLFP | 3.65 / 2.5 V | 314 Ah nominal at 0.5P (1,004.8 Wh). Mass 5,600 ± 300 g. | – | – | 0.18 mΩ (typical ± 0.05) | 8,000: To 70% state of health at 25 °C, 0.5P. | Charge 0 to 60 °C; discharge -30 to 60 °C | EVE product specification PBRI-MB31-D06-01, ver. A (Nov 2023)maker's sheet, copy hosted elsewhere |
| LF280KEVE EnergyLFP | 3.65 / 2.5 V | 280 Ah typical and minimum at 0.5C. Mass 5,220 ± 200 g. | – | – | 0.25 mΩ (maximum) | 6,000: To 80% at 25 °C, 0.5C discharge, 300 kgf clamp; 2,500 cycles at 45 °C. | Charge 0 to 55 °C; discharge -20 to 55 °C | EVE product specification LF280K-72174, ver. A (16 Jan 2021)maker's sheet, copy hosted elsewhere |
| N162Ah (cell model NA162P100A)HiTHIUMSodium-ion, NFPP / hard carbon | 3.3 / 1.5 V | 162 Ah nominal at 1P (456.8 Wh). Mass 4.6 ± 0.2 kg. Operating window 1.5 to 3.3 V. | – | – | 0.18 mΩ (typical ± 0.05) | 20,000: At least 20,000 cycles to 70% state of health, 1P/1P, 25 °C. | Charge -10 to 60 °C; discharge -40 to 60 °C | HiTHIUM N162Ah datasheet (Apr 2025 file)on the maker's site |
| SLPB 100216216HKokamLi-ion (cathode not named) | 4.2 / 2.7 V | Typical 40 Ah at 0.5C. Mass 1,100 ± 40 g. | 80 A (2C) | 400 A | – | 800: More than 800 cycles at 80% DoD (4.15 to 3.40 V); end-of-life not printed. | Charge 0 to 40 °C; discharge -20 to 60 °C | Kokam cell specification data SLPB 100216216H (undated)maker's sheet, copy hosted elsewhere |
| SLPB 80460330HKokamLi-ion (cathode not named) | 4.2 / 2.7 V | Typical 100 Ah at 0.5C. Mass 2,700 ± 100 g. | 200 A (2C) | 800 A | – | 800: More than 800 cycles at 80% DoD (4.15 to 3.40 V); end-of-life not printed. | Charge 0 to 40 °C; discharge -20 to 60 °C | Kokam cell specification data SLPB 80460330H (undated)maker's sheet, copy hosted elsewhere |
Learn to pick cells and design the pack around them
Skill-Lync's Introduction to Battery Technology for Electric Vehicle course covers cell chemistry and datasheets and includes an 18 kWh pack design project; Li-ion battery system design takes it to full battery systems in MATLAB.
Frequently asked questions
What is a battery cell?
A battery cell is the smallest working unit of a battery: a positive electrode (cathode), a negative electrode (anode), a separator and electrolyte, sealed in a metal can or a foil pouch. Its chemistry sets the voltage (about 3.6 V for most lithium-ion, 3.2 V for LFP) and its size sets the capacity. Cells are joined into modules and packs.
What is the difference between a battery cell and a battery pack?
A cell is one electrochemical unit; a pack is many cells in series (for voltage) and parallel (for capacity), plus busbars, a battery management system, cooling and an enclosure. A 40 kWh pack at about 350 V needs 2,254 INR21700-50E cells (98S23P), but only 214 EVE LF105 cells.
What does 18650 mean on a battery?
It is the cell's size: 18 mm diameter and 65.0 mm length. The first two digits are the diameter in millimetres and the last three the length in tenths of a millimetre, so a 21700 is 21 × 70.0 mm and a 26650 is 26 × 65.0 mm. Real cells are slightly larger: Panasonic's NCR18650B is 18.5 × 65.3 mm.
Which is better, 18650 or 21700?
A 21700 holds about 1.43 times the volume of an 18650, so it stores more energy per cell (17.8 Wh for the INR21700-50E against 12.1 Wh for the NCR18650B) and a pack needs fewer cells and welds. Energy density per kilogram is similar (256 vs 249 Wh/kg). 18650s still suit small devices and existing designs.
What is the energy density of an LFP cell?
On their datasheets, the four EVE prismatic LFP cells here (105 to 314 Ah) give 170 to 179 Wh/kg and 345 to 389 Wh/L, against 135 to 267 Wh/kg for the 3.6-3.7 V lithium-ion cylindrical and pouch cells. LFP trades energy density for long cycle life (4,000 to 8,000 cycles printed, each to its own test) and a 3.2 V nominal voltage.
Is sodium-ion better than lithium-ion?
Not on energy density yet: the two sodium-ion datasheets here give 99 to 106 Wh/kg, below LFP's 170 to 179 Wh/kg. Their case is materials and cold or long-life use: HiTHIUM prints 20,000 cycles for its N162Ah storage cell, and Tiamat's 18650 allows 15C continuous discharge.
How do I compare battery cells?
Compare the same quantities on the same basis: nominal energy (V × Ah), mass and volume for Wh/kg and Wh/L, the continuous current as a C-rate, and cycle life only when the test conditions match. Check whether the sheet gives typical or minimum capacity and typical or maximum mass, and whether it is a final or a tentative document.
Related on Skill-Lync
- Battery pack calculator: cells in series and parallel for any kWh and voltage, with the cell-block drawing
- Battery thermal model calculator: how hot the cells get under a drive cycle or a fault
- Battery chemistry comparison: LCO, LMO, NCA, NMC, LFP and LTO materials, half-reactions and theoretical capacity
- SOC estimation simulator: coulomb counting and a Kalman filter on a cell model
- Battery management systems, Skill-Lync's free interactive book
- LFP vs NMC battery and what is inside a lithium-ion cell
- Battery technology courses, all electric vehicle courses and all free engineering tools
Sources
- Each cell's datasheet, linked in its row and in the full table above (maker, document number and revision as printed). Read on 22 Nov 2026; datasheets are revised, so check the latest before you design.
- CATL, "CATL launches CTP 3.0 battery 'Qilin'", 23 Jun 2022: catl.com/en/news/958.html. Ola Electric press release, 15 Aug 2024: olaelectric.com (PDF). Both read on 22 Nov 2026.
- Murata's VTC6 safety data sheet (TMM-TR-A23042, Jan 2023) for its cathode composition; Toshiba's SCiB catalogue (contents as of April 2025) for the printed 96 Wh/kg and 202 Wh/L.
- Skill-Lync, scripts/verify/battery_cells.py: 144 checks; every derived number on this page (energy, volume, Wh/kg, Wh/L, C-rates, W/kg and the 40 kWh packs) in exact fractions. The page recomputes them in its own code and fails the build if they differ.