Adiabatic flame temperature calculator
The flame temperature of 13 fuels burning in air, oxygen-enriched air or pure oxygen, at any equivalence ratio, starting temperature and pressure. You get the result with dissociation (chemical equilibrium) and without it, the composition of the products, and how the temperature changes from lean to rich. Free, no sign-up, runs in your browser.
Constant pressure · NASA thermo data · checked against Cantera on 220 cases · Updated 17 Nov 2026
φ < 1 is lean (excess air), φ > 1 is rich. 21% O2 means air, taken as O2 + 3.76 N2. Liquid fuels are taken as vapour.
| Product | Equilibrium (mol %) | Complete (mol %) |
|---|---|---|
| N2 | 70.86 | 71.48 |
| H2O | 18.35 | 19.01 |
| CO2 | 8.54 | 9.51 |
| CO | 0.90 | – |
| O2 | 0.46 | ≈ 0 |
| OH | 0.29 | – |
| H2 | 0.36 | – |
| NO | 0.19 | – |
| H | 0.04 | – |
| O | 0.02 | – |
| N | ≈ 0 | – |
What is the adiabatic flame temperature?
The adiabatic flame temperature is the temperature the combustion products reach if all the chemical energy released goes into heating them, with no heat lost to walls or radiation and no work done. At constant pressure it is fixed by one energy balance: the products at the flame temperature hold the same enthalpy as the reactants did at their starting temperature.
It is the upper limit of what a burner, gas turbine combustor or engine cylinder can reach, so engineers use it to estimate wall and turbine-blade temperatures, NOx formation (which rises steeply above about 1,800 K) and flame speed. The equivalence ratio sets how much oxidiser there is:
How do you calculate the adiabatic flame temperature of methane?
By hand, assume complete combustion first. Stoichiometric methane in air (φ = 1, so a = 2) burns to carbon dioxide, water vapour and nitrogen:
Step 1, heat released. Starting at 298.15 K, the reactants' enthalpy is just their enthalpy of formation (zero for O2 and N2). The difference from the products' enthalpy of formation is the heat available, all values in kJ per mol of methane:
That is the lower heating value: 802.6 kJ per 16.04 g = 50.0 MJ/kg, the textbook figure for methane. The mass of air per kg of fuel is 17.1.
Step 2, heat the products. Find the temperature at which the 10.52 mol of products have absorbed exactly 802.6 kJ of sensible enthalpy:
| Product | mol | h°f (kJ/mol) | h(Tad) − h(298 K) (kJ/mol) | Total (kJ) |
|---|---|---|---|---|
| CO2 | 1 | -393.51 | 111.22 | 111.2 |
| H2O | 2 | -241.82 | 90.27 | 180.5 |
| N2 | 7.52 | 0.00 | 67.92 | 510.8 |
| Sum | 10.52 | 802.6 |
The sensible enthalpies come from the NASA 7-coefficient polynomials (the same data this calculator uses, from the NASA Glenn thermodynamic database); you would solve by trial temperatures, interpolating between two. The result, 2326 K, means an average product heat capacity of:
That is well above the room-temperature value (30.7 J/(mol K) for this product mix; N2 alone has 29.1). A quick constant-cp estimate with room-temperature heat capacities gives 2780 K, 454 K too high, which is why the property polynomials matter. The polynomial for each species is:
Why is the real flame temperature lower: what does dissociation do?
Above about 2,000 K the products start to break apart. Splitting CO2 and H2O absorbs energy, so the equilibrium flame is cooler than the complete-combustion estimate:
For stoichiometric methane-air the complete-combustion answer is 2326 K; at equilibrium the products hold 0.90% CO, 0.29% OH, 0.36% H2 and 0.46% O2, and the temperature is 2225 K, 101 K lower. That matches the 2226 K quoted in Turns' An Introduction to Combustion. On a lean mixture the gap is small (19 K at φ = 0.8, 1996 K), because the flame is cooler and the excess O2 suppresses CO formation.
Dissociation matters most where the flame is hottest. With pure oxygen, methane would reach an impossible 5,166 K without dissociation; at equilibrium it reaches 3,052 K, with 15.58% CO and 9.33% OH in the products. Oxy-acetylene, the welding flame, reaches 3,341 K.
How do preheat and pressure change the flame temperature?
Preheating the reactants adds their sensible enthalpy, but less of it shows up than you might expect. Preheating methane-air from 298 K to 800 K raises the equilibrium flame temperature by 231 K (to 2456 K), not the 502 K of the preheat, because the hotter products dissociate more and have a higher heat capacity. Recuperators and regenerative burners work on this principle.
Pressure has no effect without dissociation. With it, a higher pressure pushes the equilibrium back towards fewer molecules (CO2 and H2O), so gas turbines and engines run slightly hotter flames for the same mixture:
| Pressure (atm) | 0.1 | 1 | 5 | 10 | 20 | 50 | 100 |
|---|---|---|---|---|---|---|---|
| Tad (K) | 2164 | 2225 | 2257 | 2268 | 2277 | 2288 | 2294 |
| T0 (K) | 250 | 298 | 400 | 500 | 600 | 700 | 800 | 900 | 1000 |
|---|---|---|---|---|---|---|---|---|---|
| Tad (K) | 2201 | 2225 | 2274 | 2321 | 2367 | 2412 | 2456 | 2499 | 2541 |
Stoichiometric methane-air, equilibrium. Top: from 298 K at the pressures shown. Bottom: at 1 atm from the starting temperatures shown.
Adiabatic flame temperature of common fuels
All stoichiometric (φ = 1) in air from 298.15 K at 1 atm, with the maximum equilibrium temperature and the equivalence ratio where it occurs (searched in steps of 0.01). The alkanes, alcohols and petrol surrogates sit within 53 K of each other (2221 to 2274 K); ethylene, acetylene, hydrogen and CO burn hotter, ammonia cooler.
| Fuel | With dissociation (K) | Complete combustion (K) | Peak (K) | at φ |
|---|---|---|---|---|
| Methane (natural gas) | 2225 | 2326 | 2233 | 1.03 |
| Ethane | 2259 | 2380 | 2270 | 1.04 |
| Propane | 2266 | 2392 | 2277 | 1.05 |
| n-Butane | 2269 | 2398 | 2281 | 1.05 |
| H2 | 2380 | 2520 | 2396 | 1.07 |
| CO | 2384 | 2664 | 2418 | 1.21 |
| Ethylene | 2369 | 2565 | 2392 | 1.09 |
| Acetylene | 2540 | 2909 | 2609 | 1.28 |
| Methanol (vapour) | 2221 | 2330 | 2229 | 1.04 |
| Ethanol (vapour) | 2236 | 2352 | 2246 | 1.04 |
| n-Heptane (vapour) | 2274 | 2407 | 2286 | 1.05 |
| Iso-octane, petrol surrogate (vapour) | 2271 | 2403 | 2283 | 1.05 |
| Ammonia | 2072 | 2106 | 2075 | 1.01 |
Petrol (iso-octane, 2271 K) and natural gas (2225 K) are close, while ammonia, studied as a carbon-free fuel for ships and power plants, reaches only 2072 K, one reason it burns slowly and is hard to keep lit.
What this calculator does not cover
- Heat loss. Real flames radiate and lose heat to walls, so measured flame and furnace temperatures are lower than these values.
- Liquid fuels. Fuels are taken as vapour. For a liquid fuel, the heat of vaporisation comes off the reactant enthalpy and lowers the flame temperature a little.
- Soot. The product set has no solid carbon, so mixtures with about as many carbon as oxygen atoms (C/O ≥ 0.98, for example acetylene-air above φ ≈ 2.45) are refused.
- Product species. 11 gases: CO2, CO, H2O, H2, O2, N2, OH, H, O, NO and N. Adding all 146 carbon, hydrogen, oxygen and nitrogen species in the database changes the methane-air result by less than 0.01 K. Air is O2 + 3.76 N2, without argon.
- Constant volume. This is the constant-pressure flame temperature. A closed-vessel (constant-volume) explosion reaches a higher temperature because no work is done pushing the surroundings.
For flames with chemistry, transport and heat loss, the next step is a 1-D flame or a reactor model in Cantera, which is what Skill-Lync's computational combustion course teaches.
Skill-Lync's combustion courses go from this equilibrium calculation to Cantera reactor models and CFD of real combustors and engines.
Frequently asked questions
What is the adiabatic flame temperature?
It is the temperature the products of combustion reach when all the heat released goes into heating them: no heat loss, no work, constant pressure. For methane burning in air at the right (stoichiometric) ratio from 25 °C and 1 atm it is 2225 K (1952 °C). Real flames run cooler because they lose heat.
How do you calculate adiabatic flame temperature?
Set the enthalpy of the products at the flame temperature equal to the enthalpy of the reactants at their starting temperature, and solve for the temperature. Without dissociation you can do it by hand with tables. With dissociation you must also solve the chemical equilibrium at each trial temperature, which is what this calculator and Cantera do.
What is the adiabatic flame temperature of methane?
2225 K (1952 °C) for a stoichiometric methane-air mixture from 298 K at 1 atm, with dissociation. Ignoring dissociation gives 2326 K. The maximum, 2233 K, is at a slightly rich equivalence ratio of 1.03. With pure oxygen instead of air, methane reaches 3052 K.
Why is the flame temperature highest on the rich side of stoichiometric?
Slightly rich mixtures leave some CO and H2 in the products instead of CO2 and H2O. That releases a little less heat, but the products have a lower heat capacity and dissociate less, so the temperature rises a little further. For alkanes, alcohols and petrol in air the peak is at φ ≈ 1.03 to 1.05; ethylene peaks at 1.09 and acetylene at 1.28.
Does pressure change the adiabatic flame temperature?
Only through dissociation. Without dissociation the flame temperature does not depend on pressure at all. With it, higher pressure pushes the equilibrium back towards CO2 and H2O, so methane-air at 20 atm reaches 2277 K against 2225 K at 1 atm. At 0.1 atm it falls to 2164 K.
What is the adiabatic flame temperature of hydrogen?
2380 K for stoichiometric hydrogen-air from 298 K at 1 atm with dissociation, and 2396 K at its peak (φ = 1.07). Without dissociation the estimate would be 2520 K. The hotter flame is one reason hydrogen burners tend to make more thermal NOx than natural gas burners at the same equivalence ratio.
Is this calculator accurate?
For an ideal-gas, adiabatic, constant-pressure flame, yes: Skill-Lync checked it against Cantera's equilibrium solver on 220 cases (worst difference below 0.01 K) using the same NASA property data. It ignores heat loss, liquid-fuel evaporation and soot, which the page explains.
Related on Skill-Lync
- Student project: adiabatic flame temperature calculation using Cantera
- Stages of combustion in CI engines
- How IC engines work
- Rankine cycle calculator
- All free engineering tools
Sources
- S. R. Turns, An Introduction to Combustion: Concepts and Applications, 3rd ed., chapter 2 (adiabatic flame temperature, constant pressure and volume, dissociation; methane-air 2,226 K).
- S. Gordon and B. J. McBride, Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications, NASA RP-1311 (1994): the Gibbs-minimisation iteration and step control this calculator implements.
- B. J. McBride, M. J. Zehe and S. Gordon, NASA Glenn Coefficients for Calculating Thermodynamic Properties of Individual Species, NASA TP-2002-211556; coefficients as distributed with Cantera (3.2.0) in nasa_gas.yaml.
- D. G. Goodwin et al., Cantera: an object-oriented software toolkit for chemical kinetics, thermodynamics and transport processes, version 3.2.0: the independent equilibrium solver used to check every number.
- Worked examples and all their numbers: Skill-Lync, checked by scripts/verify/aft.py (Cantera HP equilibrium for 220 cases, enthalpies of formation against NIST-JANAF, a full 146-species check) and recomputed by this page's calculator code at every build.