Aircraft towing calculator: tow force, power and tug size
Work out what it takes to push back or tow an aircraft: the force in the tow bar, the power at the tug's wheels, how heavy the tug must be so its tyres don't spin, the motor torque and chopper duty cycle from standstill to top speed, and the battery energy one pushback really uses. Aircraft weights from the manufacturers' airport planning documents. Free, no sign-up.
Manufacturer ramp weights · free body per vehicle · grip limit · switched-chopper check · 24 verifier checks · Updated 20 Nov 2026
Aircraft and tug
The move
Defaults (sources): rolling 0.02 on hard dry pavement, 4% breakaway and grip 0.8 dry / 0.57 wet from Airbus's tug-sizing charts, 1% slope (ICAO's maximum for an aircraft stand), an 8 t tug. Idle thrust fills in for Airbus types; it opposes a pushback once engines are started. Set 0 s for no acceleration term.
Wheels and gearing
DC motor and chopper
Voltage, speed and supply from MATLAB's DC7 drive (200 hp set); rated current and Ra are assumed. Replace them with your motor. Separately excited (constant field) or permanent-magnet DC: back-EMF E = k·ω and torque T = k·I with k = (V − I·Ra)/ω at the rated point. The force and speed come from the Force and tug tab.
One operation
Aircraft, tug, slope, grip and acceleration come from the Force and tug tab; gear efficiency from the Motor tab. The pushback climbs the slope and the drive back goes down it. Every leg starts from rest and stops on the brakes (no regeneration). Auxiliaries (steering pump, lights, controls) are an assumed allowance.
Your assumptions
Your answers
Filled in with the most copied A380 answer in the reports. Leave a box empty to skip it.
- The 8 t tug grips: it needs μ 0.52 of the 0.8 available.
- At the tyres: 40.8 kN to break away, 37.4 kN accelerating (0.14 m/s²), 25.4 kN steady. Slope 8.5 kN, drag 24 N.
- Motor 413 rpm at 5 km/h; top speed at rated rpm 14.3 km/h. Wheel torque 18,363 N·m.
- The "duty = power ÷ rated power" shortcut gives 27% at 5 km/h (the chopper needs 32%) and 2% for the tug driving back alone at 10 km/h, when it needs 59%.
| Leg | Force | Time | At wheels | Battery |
|---|---|---|---|---|
| Pushback from the stand | 25.4 kN | 77 s | 0.73 kWh | 0.96 kWh |
| Tug drives back alone | 0.9 kN | 113 s | 0.08 kWh | 0.15 kWh |
Battery = work at the wheels ÷ (gear × motor × chopper efficiency) + auxiliaries × time.
How to calculate the force to tow an aircraft
Draw two free bodies. The aircraft is pulled (or pushed) by the tow bar and held back by its tyres' rolling resistance, the downhill part of its weight, its inertia while it speeds up, air drag and, once its engines are started, their idle thrust. The tug's tyres must supply that tow-bar force plus the rolling, slope and inertia terms of the tug itself.
Before it rolls, a parked aircraft needs more: Airbus sizes tugs for a breakaway resistance of 4% of the aircraft's weight, twice the 0.02 rolling coefficient used for hard, dry pavement. In the default case breakaway sets the tug's weight and the motor's peak torque, and steady rolling sets the energy.
For the default case, an Airbus A320-200 at its maximum ramp weight of 78.4 t pushed back at 5 km/h up a 1% slope by an 8 t tug, engines off:
- Breakaway: 0.04 × 78,400 × 9.81 + slope 7.7 kN = 38.5 kN in the tow bar, 40.8 kN at the tug's tyres.
- Getting to speed in 10 s (0.14 m/s²): rolling 15.4 + slope 7.7 + acceleration 10.9 kN = 34.0 kN in the bar, 37.4 kN at the tyres and 52.0 kW at the wheels.
- Steady 5 km/h: 25.4 kN and 35.3 kW. Drag is 24 N, too small to matter. Speed must be in m/s: 5 ÷ 3.6 = 1.39 m/s.
A 1% slope adds half as much again as rolling resistance, which is why "the runway is flat, so the gradient is zero" is not a safe assumption. ICAO recommends at most 1% on an aircraft stand, 1.5% on taxiways for code C to F aircraft, and 1% overall on a code 3 or 4 runway.
Why a tug has to be heavy
A tug cannot push harder than its tyres grip. The most a driven tyre can transmit is the adhesion coefficient μ times the weight on it, so the tug's own mass sets its pushing limit. Airbus's charts use μ = 0.8 on dry concrete, 0.57 on wet, 0.2 on hard snow and 0.05 on ice:
The default aircraft needs 40.8 kN at the tyres to break away, so with all wheels driven the tug must weigh at least 5.1 t on dry concrete, whatever its motor power. That is why tugs carry ballast. Airbus's own worked example for the A380 (560 t, 1.5% slope, 2 engines at idle, wet tarmac) asks for a 34.4 t drawbar pull and a tug of at least 60.4 t; its A320 example (70 t, 1.5%, 1 engine, wet) asks for 4,400 kg of pull and 7,690 kg of tug. Real tugs sit in that range: TLD's conventional TMX-650 for wide-bodies weighs 55 to 70 t, and its electric TMX-50-E for aircraft up to the A321 comes in 4, 6 and 8 t versions.
The 1,000 kg "pushback vehicle" copied into 40 reports cannot move an A380: even at their own rolling coefficient of 0.002 it would need μ = 1.15, more than rubber on dry concrete can give. A towbarless tug gets round part of this by lifting the nose wheel, which puts some of the aircraft's weight on the tug's driven wheels.
Duty cycle: voltage, not power
A chopper (MATLAB's four-quadrant chopper DC drive, the DC7 block the challenge points to, switches at 5 kHz) connects the battery for a fraction D of each switching period, so the motor sees an average of D × Vdc. In steady state that average must equal the back-EMF, which is proportional to speed, plus the drop across the armature resistance, which is proportional to current and so to torque:
The default motor uses the DC7 block's 200 hp set (440 V, 1,184 rpm, 500 V supply); its rated current and armature resistance are our assumptions. Breaking the aircraft away takes 428 A (1.22 × rated, inside DC7's 1.5 per-unit current limit) at only 4% duty, because there is no back-EMF yet. At 5 km/h the duty is 33% while accelerating and 32% cruising. The tug driving back alone at 10 km/h needs 59% duty, yet uses only 2% of the motor's rated power. So the range from standstill to top speed is roughly 4% to 100%, rising almost in a straight line with speed whatever the load. Dividing required power by rated power, as 223 reports do, measures load, not switching duty.
What 721 student reports got wrong
"Project-1: Powertrain for aircraft in runways" is a challenge in Skill-Lync's hybrid and electric vehicle course, and 742 reports with this or a similar title are public. We read the 721 that load (counts as of 20 Nov 2026, from pattern searches with samples checked by hand). These are the patterns that recur:
- Duty cycle as a power ratio. 223 reports write duty cycle = output power ÷ input (or rated) power; 19 use the voltage ratio. 61 give a battery "capacity" in kW: kW is power, a battery's capacity is kWh.
- No slope. At least 179 reports set the gradient to zero because "runways are flat"; we found 3 that use a slope at all (5° twice and 10° once, an 8.7% and a 17.6% grade, far steeper than ICAO allows anywhere on an airfield). On a 1% slope the weight component of the default aircraft is 7.7 kN.
- No breakaway, little acceleration. Only about 32 reports include the force to accelerate the aircraft. One quotes a tug maker's sizing formula with a breakaway term (reading the 4% as 0.40) and then leaves it out of its own sum; no other report mentions breakaway.
- A rolling coefficient anywhere from 0.002 to 0.03. In the 340 reports whose rolling-resistance line we could parse, the aircraft value was 0.02 in 86, 0.01 in 46, 0.005 or 0.004 in 80, 0.002 in 34 and 0.03 in 28: a 15× spread. At 0.002 an A380 needs 11.3 kN; at 0.02 it is 112.8 kN.
- A tug that cannot grip. In 36 of the 160 reports that give both an aircraft and a tug mass, the force they compute is more than 0.8 × the tug's weight, so its tyres would spin. Most are the copied "mass of the push back: 1000 kg".
- Energy = peak power × time. At least 107 reports multiply the required power by a fixed working time; "127.928 kW × 0.25 h = 31.98 kWh" appears in 25. A pushback needs peak power for seconds, so the energy has to come from the distance (see the Energy tab).
- A copied arithmetic slip. 0.002 × 575,000 × 9.81 = 11.28 kN and 11.2815 kN × 4 m/s = 45.13 kW, but 40 reports print 45.26 kW. (14.5 km/h is also 4.03 m/s, not 4.)
Where the inputs come from
Aircraft masses are the maximum ramp (taxi) weight of the heaviest weight variant, the most a tug ever has to move:
| Aircraft | Max ramp weight | MTOW | Source |
|---|---|---|---|
| Airbus A320-200 | 78,400 kg | 78,000 kg | Airbus AC (Airport and Maintenance Planning) 2-1-1, A320, rev. Jul 2026 (WV015) |
| Airbus A321neo | 93,900 kg | 93,500 kg | Airbus AC (Airport and Maintenance Planning) 2-1-1, A321, rev. Jul 2026 (WV052/053) |
| Airbus A330-300 | 2,42,900 kg | 2,42,000 kg | Airbus AC (Airport and Maintenance Planning) 2-1-1, A330, rev. Dec 2025 (WV081) |
| Airbus A350-900 | 2,80,900 kg | 2,80,000 kg | Airbus AC (Airport and Maintenance Planning) 2-1-1, A350, rev. Jul 2026 (WV010/013) |
| Airbus A380-800 | 5,77,000 kg | 5,75,000 kg | Airbus AC (Airport and Maintenance Planning) 2-1-1, A380, rev. Dec 2025 (WV008/011) |
| Boeing 737-800 | 79,242 kg | 79,015 kg | Boeing, 737 Airplane Characteristics for Airport Planning, D6-58325-7 Rev C (Oct 2025), 2.1.3: 174,700 lb max design taxi (Boeing kg) |
| Boeing 747-8 | 4,49,056 kg | 4,47,695 kg | Boeing, D6-58326-3 Rev E (Jan 2026), 2.1.2: 990,000 lb max design taxi (Boeing kg) |
| Boeing 777-300ER | 3,52,441 kg | 3,51,534 kg | Boeing, D6-58329-2 Rev G (Dec 2024), 2.1.1: 777,000 lb max design taxi (Boeing kg) |
| Boeing 787-9 | 2,59,908 kg | 2,59,228 kg | Boeing, D6-58333 Rev Q (Oct 2025), 2.1.2: 573,000 lb max design taxi (Boeing kg) |
| ATR 72-600 | 23,170 kg | 23,000 kg | EASA TCDS A.084 Issue 14 (Feb 2026), 13 b), ATR 72-212A Mod 6219 |
| Cessna 172S | 1,160 kg | 1,157 kg | Cessna 172S NAV III Information Manual, Section 2: 2,558 lb ramp |
- Breakaway 4%, grip 0.8 dry / 0.57 wet / 0.2 hard snow / 0.05 ice, idle thrust (A320 525 daN, A330 1,500, A350-900 1,415, A380 1,779.3 daN per engine): the "Ground Towing Requirements" chart in section 5-8-0 of each Airbus AC document. This page reproduces Airbus's four worked examples to the printed rounding: A320 4,385 kg of pull (printed 4,400), A330 14,179 (14,200), A350-900 16,442 (16,400), A380 34,428 (34,400).
- Rolling coefficient 0.02 for hard, dry pavement (0.04-0.06 firm short grass): J. G. Leishman, Introduction to Aerospace Flight Vehicles, Takeoff and Landing Performance. Used for the tug's tyres too.
- Slopes: ICAO Annex 14 Vol. I (9th ed.), 3.13.6 aircraft stand 1%, 3.9.8 taxiway 1.5% (code C-F), 3.1.13 runway 1% overall (code 3-4). These are Recommendations.
- Speed: we found no published pushback speed limit, so 5 km/h is only an example. Towbarless tugs are rated up to 32 km/h (Goldhofer AST-1X; FAA DOT/FAA/AR-TN09/44), and Taxibot taxis at 23 knots.
- Motor and chopper: DC7 Four-Quadrant Chopper DC Drive, 200 hp parameter set and 5 kHz switching (MathWorks documentation, archived 2024). Rated current 350 A and Ra 0.05 Ω are assumed; the doc page does not list them.
- Efficiencies (gear 0.9, motor 0.9, chopper 0.97) and the 1.5 kW auxiliary load are assumptions; replace them with your component data.
What this calculator does not cover
- Aircraft limits. Tow-bar shear pins (A320 9,425 daN, A330/A350 28,620 daN, A380 62,000 daN per Airbus) and nose-gear steering limits cap how hard a tug may pull. Use the manufacturer's towing procedures, not this page, for real operations.
- Towbarless tugs. Lifting the nose wheel puts part of the aircraft's weight on the tug, raising its grip. The grip check here assumes the tug's own weight only, as Airbus's chart does for a towbar tractor.
- Motor heating. Current above rated is fine for the seconds of a start but not for a long tow. Check the motor's short-time rating.
- Engines, hydraulics and regeneration. The energy tab is for a battery-electric tug with friction brakes. Diesel and hydrostatic tugs and regenerative braking need their own efficiency maps.
Sizing a tug is the same job as sizing any electric vehicle: road load, gearing, motor, chopper and battery. Skill-Lync's EV courses build all of it in MATLAB and Simulink.
- Electric vehicle courses
- Gradeability calculator (force on a slope for road vehicles)
- Regenerative braking energy calculator
How we checked the calculator
The independent Python script scripts/verify/aircraft-towing.py runs 24 checks, and this page recomputes its examples with the browser code at build time and refuses to build if they differ.
- Airbus's worked examples (A320, A330, A350-900, A380) reproduced to the printed rounding, both with the chart's formula and through this page's full force model.
- Forces from a separate free body of each vehicle; the lightest tug found by bisection on "tractive force ≤ grip" matches the closed form.
- Duty cycle: the armature circuit (R, L and back-EMF) was simulated switch by switch at 5 kHz for the computed duty, and the average current matched T/k at breakaway, accelerating, cruising and driving back alone.
- Energy: each leg was time-stepped (accelerate, cruise) and its work matched resistance × distance + ½mv².
- The report templates reproduced number by number (11,281.5 N, 45.126 kW, 25.585625 kN, 127.928 kW, 31.98 kWh, 0.745).
Frequently asked questions
How do you calculate the force needed to tow an aircraft?
Add the aircraft's rolling resistance (rolling coefficient × weight), the slope component of its weight, the force to accelerate it, the idle thrust of any running engines, and the tug's own rolling and slope terms. To start a parked aircraft, Airbus uses a 4% breakaway resistance instead of rolling. For an Airbus A320-200 at 78.4 t on a 1% slope, the tow bar carries 38.5 kN at breakaway, 34.0 kN reaching 5 km/h in 10 s and 23.1 kN at steady speed. Air drag at pushback speed is 24 N and can be ignored.
What is the rolling resistance coefficient of aircraft tyres?
About 0.02 on hard, dry pavement (0.04-0.06 on firm short grass), the value used in take-off performance calculations. Getting a parked aircraft moving takes more: Airbus's ground-towing charts use a 4% breakaway resistance.
How much power does an aircraft tug need?
Power = force × speed in m/s. Pushing back the example aircraft at 5 km/h (1.39 m/s) needs 35.3 kW at the wheels at constant speed and 52.0 kW at the end of the acceleration. A tug is sized more by the torque and grip to start a heavy aircraft at walking pace than by power.
Why are aircraft tugs so heavy?
A tug can only push as hard as its tyres grip: about μ × its weight on the driven wheels, with μ = 0.8 on dry and 0.57 on wet concrete in Airbus's charts. The example needs 40.8 kN at breakaway, so the tug must weigh at least 5.1 t on dry concrete. Airbus's A380 example asks for a tug of at least 60.4 t on a wet 1.5% slope with two engines at idle.
What is the duty cycle of a DC motor chopper in a tug?
Duty cycle D is the fraction of each switching period the chopper connects the battery, so the average motor voltage is D × Vdc. It must equal the back-EMF (proportional to speed) plus the I·R drop, so D rises almost linearly with speed and is only a few percent at standstill. It is not output power divided by rated power: the example tug driving back alone at 10 km/h needs 59% duty while using 2% of rated power.
How much energy does one pushback use?
About 1.11 kWh from the battery in the example (a 100 m pushback and a 300 m drive back with 1.5 kW of auxiliaries). Multiplying peak power by a whole working time, such as 52.0 kW × 15 min = 13.0 kWh, overstates it many times, because peak power lasts only seconds.
Is this aircraft towing calculator free?
Yes. It runs in your browser, needs no sign-up and sends nothing anywhere.
Related on Skill-Lync
- Gradeability calculator
- Regenerative braking energy calculator
- Battery pack calculator
- AVR PWM calculator (duty cycle and PWM frequency on a microcontroller)
- All free engineering tools
Sources
- Airbus, Aircraft Characteristics - Airport and Maintenance Planning (AC) for the A320 (Jul 2026), A321 (Jul 2026), A330 (Dec 2025), A350 (Jul 2026) and A380 (Dec 2025): 2-1-1 General Aircraft Characteristics Data; 5-8-0 Ground Towing Requirements.
- Boeing, Airplane Characteristics for Airport Planning: 737 (D6-58325-7 Rev C), 747-8 (D6-58326-3 Rev E), 777-200LR/-300ER/F (D6-58329-2 Rev G), 787 (D6-58333 Rev Q), section 2.1.
- EASA Type-Certificate Data Sheet A.084 (ATR 42/72), Issue 14, section 13; Cessna Model 172S NAV III Information Manual, Section 2.
- ICAO, Annex 14 Volume I, Aerodrome Design and Operations, 9th edition (2022): 3.1.13, 3.9.8, 3.13.6.
- J. G. Leishman, Introduction to Aerospace Flight Vehicles (Embry-Riddle Aeronautical University), chapter "Takeoff & Landing Performance".
- MathWorks, Four-Quadrant Chopper DC Drive (DC7) reference page (archived 26 Jun 2024).
- Goldhofer AST-1X data sheet (09/2023); TLD TMX-650 and TMX-50-E product pages; FAA DOT/FAA/AR-TN09/44 (2009); IAI Taxibot brochure.