Li-ion battery chemistry: LCO, LMO, NCA, NMC, LFP and LTO compared

Five of the six differ in the cathode on a graphite anode: LiCoO2 (LCO), LiMn2O4 (LMO), LiNi0.8Co0.15Al0.05O2 (NCA), LiNixMnyCozO2 (NMC) and LiFePO4 (LFP). LTO replaces graphite with spinel Li4Ti5O12. On discharge the cathode is reduced (Li1−xCoO2 + xLi+ + xe− → LiCoO2) and the anode oxidised. LiCoO2 holds 273.8 mAh/g in theory; cells use about 150.

This page is for the Week 1 "Understanding Different Battery Chemistry" challenge in Skill-Lync's battery technology course. Skill-Lync read 784 public reports on it: 393 write LTO as Li2TiO3, a different compound, and 126 write Li4Ti5O12 → Ti5O12, which can't happen. The fourth tab checks your formulas and half-reactions.

Armand et al. 2020 (J. Power Sources) · Manthiram 2020 (Nat. Commun.) · Battery University BU-205 · CIAAW 2024 atomic weights · checked against a separate script (1,139 checks at build) · Updated 22 Nov 2026

x is the lithium moved per formula unit. Charge is discharge read backwards.

LCO Lithium cobalt oxide

Cathode
LiCoO2
Anode
graphite, C6 ⇄ LiC6
Structure
layered oxide (O3), R-3m
Li+ moves
2D (between layers)
Usable x
0.55 (150 of 274 mAh/g)
Cell V
3.80 V from 3.90 − 0.10 V vs Li; BU prints 3.60 V

Cathode

Anode

Overall

LMO Lithium manganese oxide (spinel)

Cathode
LiMn2O4
Anode
graphite, C6 ⇄ LiC6
Structure
spinel, Fd-3m
Li+ moves
3D (through the spinel framework)
Usable x
0.74 (110 of 148 mAh/g)
Cell V
4.00 V from 4.10 − 0.10 V vs Li; BU prints 3.70 V (3.80 V)

Cathode

Anode

Overall

NCA Lithium nickel cobalt aluminium oxide

Cathode
LiNi0.8Co0.15Al0.05O2
Anode
graphite, C6 ⇄ LiC6
Structure
layered oxide, R-3m
Li+ moves
2D (between layers)
Usable x
0.67 (188 of 279 mAh/g)
Cell V
3.60 V from 3.70 − 0.10 V vs Li; BU prints 3.60 V

Cathode

Anode

Overall

NMC Lithium nickel manganese cobalt oxide

Cathode
LiNixMnyCozO2: 111, 532, 622, 811 (shown: 811)
Anode
graphite, C6 ⇄ LiC6
Structure
layered oxide, R-3m
Li+ moves
2D (between layers)
Usable x
0.69 (190 of 276 mAh/g)
Cell V
3.60 V from 3.70 − 0.10 V vs Li; BU prints 3.60 V, 3.70 V

(NMC 811)

Cathode

Anode

Overall

LFP Lithium iron phosphate

Cathode
LiFePO4
Anode
graphite, C6 ⇄ LiC6
Structure
phospho-olivine, Pnma
Li+ moves
1D (channels along b)
Usable x
0.97 (165 of 170 mAh/g)
Cell V
3.35 V from 3.45 − 0.10 V vs Li; BU prints 3.20, 3.30 V

Cathode

Anode

Overall

LTO Lithium titanate (anode)

Cathode
LiMn2O4 (LMO here; NMC also used)
Anode
Li4Ti5O12 ⇄ Li7Ti5O12 (spinel)
Structure
anode spinel Fd-3m; cathode spinel Fd-3m
Li+ moves
3D in both spinels
Usable x
3.00 of 3 Li per Li4Ti5O12
Cell V
2.55 V from 4.10 − 1.55 V vs Li; BU prints 2.40 V

Cathode

Anode

Overall

Structures and average potentials: Armand et al. 2020, Table 2. Diffusion: Manthiram 2020 (layered 2D, spinel 3D); the olivine's Li sits in channels along one axis. Every reaction here is checked for atoms and charge at build time.

What are the anode and cathode reactions of LCO, LMO, NCA, NMC, LFP and LTO?

On discharge, lithium ions leave the anode, cross the electrolyte and go into the cathode, while electrons go round the outside circuit. So the cathode is reduced and the anode oxidised. For LCO on graphite:

The other graphite cells only swap the cathode host: Li1−xMn2O4, Li1−xMO2 for NCA and NMC, Li1−xFePO4. In LFP the two ends are two separate phases, FePO4 and LiFePO4, which is why its voltage is so flat. LTO swaps the anode instead:

with 0 ≤ x ≤ 3. Charge is each line read backwards. The x matters: it is the lithium actually moved, and a reaction without it says every lithium leaves. For LiCoO2 that is not true. Charging past about Li0.5CoO2 makes the lattice release oxygen (Manthiram, 2020), so practical utilisation is "limited to about 50%" (Armand et al., 2020).

In LTO, titanium is already Ti4+. The material can only take lithium in (Ti4+ to Ti3+), up to Li7Ti5O12, at about 1.55 V against lithium. Its unit cell changes volume by only 0.2%, which is why it is called zero-strain (Armand et al., 2020).

How do you calculate the theoretical capacity of a cathode?

Divide the charge one mole moves by the mass of one mole. One mole of electrons is Faraday's constant, 96,485.33212 C, and 1 mAh is 3.6 C:

For LiCoO2, with CIAAW 2024 atomic weights:

LTO moves 3 Li per Li4Ti5O12, and graphite 1 Li per C6; anodes are counted per gram of the empty host:

MaterialBasisM (g/mol)Theoretical (mAh/g)Printed (Armand)Practical (Armand)Usable share
LCOLiCoO297.871273.827415055%
LMOLiMn2O4180.812148.2—11074%
NCALiNi0.8Co0.15Al0.05O296.081278.9—18867%
NMC111LiNi1/3Mn1/3Co1/3O296.459277.9—16058%
NMC532LiNi0.5Mn0.3Co0.2O296.552277.6—16559%
NMC622LiNi0.6Mn0.2Co0.2O296.928276.5—17061%
NMC811LiNi0.8Mn0.1Co0.1O297.279275.5—19069%
LNOLiNiO297.631274.5—24087%
LFPLiFePO4157.755169.917016597%
graphiteC672.066371.937236097%
LTOLi4Ti5O12 (n = 3)459.083175.1175175100%
SiSi (n = 3.75)28.0853578.635793579100%

Practical capacities and potentials are the values Armand et al. (2020) tabulate; the theoretical ones are worked out here and match every theoretical value they print to within 1 mAh/g. Silicon is counted to Li15Si4, 3.75 Li per Si. NMC 111 is computed with exact thirds; Armand writes 0.33. For LTO and silicon Armand gives one capacity (175 and 3579 mAh/g), used in both columns.

The usable share shows the story: LFP and graphite give almost all their theoretical lithium, the layered oxides 55 to 69%, rising with nickel (LiNiO2 87%), because nickel can go all the way to Ni4+ without much oxygen loss, unlike cobalt (Manthiram, 2020).

Why is a real cell's Wh/kg 2 to 3 times lower than the material numbers?

Start with the two active materials alone. Every Ah needs 1/qc grams of cathode and (N/P)/qa grams of anode, where N/P is how much spare anode capacity the cell carries:

That reproduces Armand et al.'s Table 2 for every cathode on this page, within 0.5 Wh/kg: 379 Wh/kg for LFP, 445 for NCA and 448 for NMC 811 on graphite. LMO against LTO gives only 172 Wh/kg: 2.55 V and a heavier anode.

A cell also carries electrolyte, separator, copper and aluminium foils, binder, carbon, the can and tabs. Against the datasheet cells on Skill-Lync's battery cell comparison: the EVE LF280K prismatic LFP cell reaches 171.6 Wh/kg, 45% of the LFP-graphite ceiling, and the LFP cells there span 29 to 48%. The 18650 and 21700 cells (the datasheets don't name their cathodes) reach 30 to 60% of the NMC 811 ceiling, the LG MJ1 259.6 Wh/kg. Toshiba's SCiB 23 Ah LTO cell gets 96.2 Wh/kg, 56% of the LMO-LTO ceiling. So the active materials are, very roughly, half the mass of a good cell.

A rough split, not a teardown: the share assumes the cell's capacity-matched active materials at the average potentials above. Tab 3 lists every datasheet cell against the couple you pick.

How do the six Li-ion chemistries compare?

Battery University's BU-205 summary tables give the cell-level ranges; the last three columns are worked out here from the formulas and Armand et al.'s capacities. Click a heading to sort.

Uses (BU)
LCO3.60 V150–200500–1000150 °C—1504021.06Mobile phones, tablets, laptops, cameras
LMO3.70 V (3.80 V)100–150300–700250 °C—1103370Power tools, medical devices, electric powertrains
NMC3.60 V, 3.70 V150–2201000–2000210 °C~$420 per kWh160–190399–4480.09–0.35E-bikes, medical devices, EVs, industrial
LFP3.20, 3.30 V90–1202000 and higher270 °C~$580 per kWh1653790Portable and stationary needing high load currents and endurance
NCA3.60 V200-260500150 °C~$350 per kWh1884450.14Medical devices, industrial, electric powertrain (Tesla)
LTO2.40 V50–803"One of safest"$1,005 per kWh1101720UPS, electric powertrain (Mitsubishi i-MiEV, Honda Fit EV), solar-powered street lighting

BU columns as printed in BU-205 (last updated 8 Dec 2023); its costs cite RWTH Aachen. NMC rows span 111 to 811. LTO row: LMO cathode on an LTO anode. Cobalt per kWh is the cobalt in the cathode at its practical capacity and the cell voltage against graphite (LTO for the LTO row). BU-205 says NCA is "~9% Co"; LiNi0.8Co0.15Al0.05O2 is 9.2% cobalt by mass.

The pattern: cobalt-rich LCO stores energy but costs about 1 kg of cobalt per kWh and runs away at 150 °C. NCA and NMC 811 keep the energy with a tenth of the cobalt. LFP gives up voltage (3.35 V against 3.6 to 3.8 V on graphite) for no cobalt, a 270 °C runaway onset and 2,000+ cycles. LTO gives up energy for life and fast charging. For the same cells as real products, see the battery cell comparison; to size a pack, the battery pack calculator; for heat, the battery thermal model calculator.

Is LTO Li2TiO3 or Li4Ti5O12?

Li4Ti5O12. Battery University's BU-205 heads its LTO section "Lithium Titanate (Li2TiO3) — LTO" and its summary table says "Li2TiO3 (titanate) anode"; BU-216's table writes "Li2TiO3 (common)". The same page then says "LTO (commonly Li4Ti5O12)". Li2TiO3 is lithium metatitanate, a monoclinic ceramic studied as a tritium breeder for fusion reactors. In the Li–Ti–O phase diagram that Julien and Mauger (2024) show, it is a separate end point from the spinel. As an anode it would need titanium to go past +4 to give up lithium, which is why "Li2TiO3 → TiO3 + 2Li+ + 2e−" can't be right: TiO3 would be Ti6+.

Li4Ti5O12 has the same problem the other way round. Its titanium is already Ti4+, so it can't give up its own 4 lithium: "Li4Ti5O12 → Ti5O12 + 4Li+ + 4e−" is balanced on paper but impossible. It takes 3 more, to Li7Ti5O12, when the cell charges.

What did 784 student reports write?

Skill-Lync read the text of all 784 public "Week 1 Understanding Different Battery Chemistry" reports on 22 Nov 2026. 168 have no images; 168 have 10 or more, and many put their table in an image, which isn't counted. Each row counts reports, not mentions.

What the text writesReportsExamples
Write LTO as Li2TiO3 (lithium metatitanate)3931, 2, 3
… of them, copy Battery University's heading "Lithium Titanate (Li2TiO3)"2741, 2, 3
Write the LTO anode as Li4Ti5O12 anywhere3091, 2, 3
Write the lithiated form Li7Ti5O12681, 2, 3
Write Li4Ti5O12 + 3Li+ + 3e− ⇄ Li7Ti5O12 (right)131, 2, 3
Write Li4Ti5O12 → Ti5O12 + 4Li+ + 4e−1261, 2, 3
Write Li2TiO3 → TiO3 + 2Li+ + 2e−411, 2, 3
Put LiMnO2 in an LMO reaction (LMO is LiMn2O4)901, 2, 3
Write NCA as LiNiCoAlO2, no proportions5211, 2, 3
Give NCA's 0.8 / 0.15 / 0.05441, 2, 3
Write NMC as LiNiMnCoO2, no proportions4791, 2, 3
Give an NMC grade's proportions (e.g. Ni0.8Mn0.1Co0.1)561, 2, 3
Put bare CoO2 in a reaction (x = 1)761, 2, 3
Write LiFe(III)PO4 (it is Fe(II))401, 2, 3
Use x for LCO (Li1−xCoO2)1701, 2, 3
Give any capacity in mAh/g401, 2, 3
Say LTO replaces the graphite anode (right)2971, 2, 3
Table row: graphite as the anode of all six, LTO included61, 2, 3
No formula of the six materials in the text (tables as images)971, 2, 3
  • Copied, not worked. 274 reports carry BU-205's "Lithium Titanate (Li2TiO3)" heading word for word and 54 its "Li2TiO3 (titanate) anode"; 169 write both Li2TiO3 and Li4Ti5O12 without noticing they differ.
  • Formulas that don't add up. LiNiCoAlO2 with one of each metal can't balance its charges (tab 4 shows why). 8 write LiMnO2 ⇄ Li1−xMn2O4 + xLi+ + xe−, which is short one Mn and two O.
  • Capacity is almost missing. Only 40 give any capacity in mAh/g and 13 mention a theoretical capacity, though the question asks for a comparison.

Counts as of 22 Nov 2026, n = 784, from the text of each public report (Skill-Lync's own data, a starting point, not a grade). Whether a half-reaction is labelled as charge or discharge wasn't counted: the labels sit in table layouts the text doesn't keep.

What this page does not cover

  • Voltage curves. The voltages are averages against Li+/Li. Real curves slope (layered oxides) or stay flat (LFP, LTO), and depend on rate and temperature.
  • Cell design. The ceiling counts only the active materials; electrode loading, porosity and the inactive parts set the rest. Datasheets, not this page, give a cell's real numbers.
  • Nitta et al. 2015. Its review table (Materials Today) couldn't be read for this page, so its values aren't used; Armand et al. 2020's table is used instead.
  • Silicon and lithium metal are listed as anodes for the theory only: neither is one of the six chemistries.
Learn battery technology

Choosing a chemistry is the first decision in a battery pack, and EV teams expect you to explain it with numbers. The battery chemistry challenge is week 1 of Skill-Lync's battery technology course.

Frequently asked questions

What is the anode in an LTO battery?

Spinel lithium titanate, Li4Ti5O12, in place of graphite. It takes 3 Li per formula unit at about 1.55 V against lithium, becoming Li7Ti5O12, with almost no change in volume. The cathode is usually LMO or NMC, so the cell runs at about 2.4 V, against 3.6 to 3.7 V for a graphite cell.

What is the theoretical capacity of LiCoO2?

273.8 mAh/g, from one lithium per LiCoO2: Q = 96,485 × 1 / (3.6 × 97.87). A practical LCO cathode gives about 150 mAh/g (Armand et al., 2020), because only about half of the lithium can come out before the layered structure starts releasing oxygen.

Why can only half of the lithium leave LiCoO2?

The Co3+/4+ band overlaps the top of the oxygen 2p band, so charging past half the lithium, below Li0.5CoO2, releases oxygen from the lattice (Manthiram, 2020). That costs capacity and safety, so cells stop near x = 0.5, about 150 of the 274 mAh/g.

What is the difference between NMC and NCA?

Both are layered R-3m oxides on graphite. NMC mixes nickel, manganese and cobalt in grades such as 111, 532, 622 and 811; NCA is nickel-rich with cobalt and a little aluminium, about LiNi0.8Co0.15Al0.05O2. Armand et al. list 188 mAh/g for NCA and 160 to 190 mAh/g across NMC grades, all at about 3.7 V.

Why does LFP have a lower voltage than NMC?

LiFePO4 works on the Fe2+/Fe3+ couple at about 3.45 V against lithium, while layered nickel oxides sit near 3.7 V and LiCoO2 near 3.9 V. With graphite at about 0.1 V that gives roughly 3.35 V per LFP cell; Battery University prints 3.20 to 3.30 V nominal.

Is lithium titanate Li2TiO3 or Li4Ti5O12?

The LTO battery anode is Li4Ti5O12, a spinel. Li2TiO3 is lithium metatitanate, a different compound studied as a tritium breeder for fusion. Battery University's BU-205 heading prints "Lithium Titanate (Li2TiO3)", and 274 of the 784 reports Skill-Lync read copy that heading.

Related on Skill-Lync

Sources

  • M. Armand, P. Axmann, D. Bresser et al., "Lithium-ion batteries – Current state of the art and anticipated developments", Journal of Power Sources 479 (2020) 228708, open access (KIT repository copy): Table 2 (structure, space group, practical capacity, average potential, specific energy with graphite at 360 mAh/g and 0.1 V); text values for graphite (372 mAh/g at LiC6), LTO (1.55 V, 175 mAh/g, 0.2% volume change), silicon (3579 mAh/g, ca. 0.4 V), LFP (170 mAh/g, 3.45 V) and LCO (274 mAh/g, about 50% usable).
  • A. Manthiram, "A reflection on lithium-ion battery cathode chemistry", Nature Communications 11 (2020) 1550: oxygen release below Li0.5CoO2, practical LiCoO2 about 140 mAh/g, 2D lithium diffusion in layered and 3D in spinel oxides, LiMn2O4 below 130 mAh/g at 4 V.
  • A. Mohamed and N. K. Allam, "Recent advances in the design of cathode materials for Li-ion batteries", RSC Advances 10 (2020) 21662 (PMC9054595): olivine LiFePO4 in Pnma with lithium in a tunnel along [010]; layered LiMnO2 in Pmmn or C2/m, distinct from spinel.
  • C. M. Julien and A. Mauger, "Fabrication of Li4Ti5O12 (LTO) as anode material for Li-ion batteries", Micromachines 15 (2024) 310 (PMC10972107): the Li[Li1/3Ti5/3]O4 to Li2[Li1/3Ti5/3]O4 reaction at 1.55 V, Ohzuku et al.'s zero-strain result, the Li–Ti–O phase diagram with Li2TiO3.
  • Battery University, BU-205 "Types of Lithium-ion" (last updated 8 Dec 2023) and BU-216 "Summary Table of Lithium-based Batteries" (15 Jan 2024), read 22 Nov 2026: voltages, specific energy, cycle life, thermal runaway, cost and uses as printed.
  • CIAAW, Abridged Standard Atomic Weights 2024 (ciaaw.org); CODATA Faraday constant (NIST), 96 485.332 12 C/mol. Lithium metatitanate (Li2TiO3): Wikipedia "Lithium titanate" and the Hanaor et al. 2014 paper it cites.
  • Not used: N. Nitta et al., "Li-ion battery materials: present and future", Materials Today 18 (2015) 252, could not be read for this page.
  • Skill-Lync, all 784 public Week 1 battery chemistry reports, read 22 Nov 2026. scripts/verify/battery_chemistry.py redoes every number with exact fractions, its own formula parser and a hand-typed atomic weight table, 263 cases; the page checks itself against it at build time (1,139 checks).
Free counselling

From a chemistry table to a battery engineering job.

Getting the reactions and the numbers right, and saying where they stop, is what battery teams look for. A Skill-Lync counsellor can map the battery or EV course that fits the role you want.

Talk to a battery course counsellor

Free. We call you back, usually the same day.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.