HyperMesh and ANSA meshing project ideas

17 pre-processing projects that Skill-Lync learners have actually built in HyperMesh and ANSA: sheet metal and plastic shell meshes, tetra and hexa solid meshes, connections, morphing and TCL macros, then CFD meshes from a pressure valve to a car in a wind tunnel. Each one comes with real reports you can read before you choose, the quality criteria it was held to, and one way to extend it into a final-year project.

As of 16 Nov 2026: 6,464 of 1,41,067 public learner reports match one of these ideas · Counts are reports, not unique students

How to pick one

  1. Start with one sheet metal part. The car hood is set in both the HyperMesh and the ANSA course for a reason: mid-surface extraction, mesh flow and a quality table (aspect ratio, warpage, skew, Jacobian, tria share) are the whole job in small form. Get it to pass every criterion before you move on.
  2. Pick the tool your target employers use. Meshing service companies and car makers use both. Read ten job ads for 'CAE meshing engineer' in your city and count which tool they name. The habits carry over; the menus do not, and a tool test in the interview uses one or the other.
  3. Then show breadth, not more hoods. One plastic part, one solid mesh, one assembly with connections and one CFD mesh say more than five sheet metal parts. If you can script, a TCL macro that saves time is the project that stands out.

2D shell meshing project ideas

Sheet metal and plastic parts meshed on their mid-surfaces: most CAE meshing jobs are this.

Car hood: mid-surface and shell mesh to quality criteria

BeginnerHyperMesh or ANSA1,038 reports

The first real meshing job in both courses. Import the hood (outer, inner and reinforcements), clean up the geometry, extract a mid-surface for each sheet, mesh it with a 5 mm target element size, assign thicknesses, and pass every element against the given criteria. The HyperMesh version allows aspect ratio up to 5, warpage 15, skew 45, quad angles 45 to 135 degrees and at most 10% trias.

Make it a final-year project: Mesh the same hood at 3, 5 and 8 mm, run a simple bending load case in OptiStruct or Nastran, and show how the stiffness result converges.

Learn it in HyperMesh for FEA Plastic and Sheet Metal Applications

Plastic part with changing wall thickness (bottle cap)

IntermediateANSA432 reports

Plastic parts are harder than sheet metal: the wall thickness varies, and ribs and bosses need their own mid-surfaces. The challenge part is a bottle cap meshed at a 1 mm target (0.5 to 3 mm allowed) with a separate property and thickness for each mid-surface, exported to OptiStruct (.fem) or Radioss (.rad).

Make it a final-year project: Compare the mid-surface shell model with a tetra mesh of the same cap under the same load, and show where the shell model goes wrong.

Learn it in Preprocessor for Structural Analysis using ANSA

Instrument panel casting meshed in ANSA

IntermediateANSA363 reports

A course project on a large automotive interior trim: the instrument panel substrate. Check and fix the geometry errors, extract the mid-surface of a part whose thickness changes from area to area, and mesh it at a 4 mm target (2 to 6 mm allowed) against the given quality table.

Make it a final-year project: Add the mounting points as rigid elements and run a free-free modal analysis to find the first natural frequency of the panel.

Learn it in Preprocessor for Structural Analysis using ANSA

Car door inner panel meshed in HyperMesh

IntermediateHyperMesh384 reports

A course project on a large plastic trim part with many holes, clips and ribs. You extract the mid-surface manually where the automatic one fails, keep a clean mesh flow around every hole, hold tria elements to the allowed share and assign thickness.

Make it a final-year project: Write a short mesh-quality report (element count, worst elements, tria share) and show how long each fix took: that is what a meshing team lead checks.

Learn it in HyperMesh for FEA Plastic and Sheet Metal Applications

Spare wheel holder (floor panel) in sheet metal

IntermediateHyperMesh398 reports

The second HyperMesh course project: the pressed steel pan that holds the spare wheel in the boot floor. Its deep draws and beads make mesh flow hard. Extract the mid-surface manually, clean the geometry, keep trias low and meet the quality criteria.

Make it a final-year project: Model the spare wheel as a lumped mass, add spot welds to the surrounding floor and check the panel's first mode against a typical road-input range.

Learn it in HyperMesh for FEA Plastic and Sheet Metal Applications

Car backdoor (tailgate) shell mesh

IntermediateHyperMesh98 reports

Mesh the outer and inner panels of a car tailgate: delete the solids that came with the CAD file, measure each sheet's thickness, extract mid-surfaces and mesh to the quality criteria, keeping the hem flange area clean.

Make it a final-year project: Connect the outer and inner panels with a hem and spot welds, and compare the door's torsional stiffness with and without the reinforcements.

Learn it in HyperMesh for FEA Plastic and Sheet Metal Applications

3D solid meshing project ideas

Thick parts that need tetra or hexa elements instead of shells.

Tetra and hexa solid meshing in ANSA

IntermediateANSA441 reports

Thick parts (wall thickness above about 5 mm) cannot be modelled as mid-surface shells. Clean up the surfaces, mesh them with trias at a 1 mm target (0.5 to 2 mm allowed), define the volumes, fill them with tetra elements and check the solid quality after volume meshing.

Make it a final-year project: Mesh one part with tetras and with hexas, run the same load case on both, and compare the stress result and the solve time.

Learn it in Preprocessor for Structural Analysis using ANSA

3D tetra meshing in HyperMesh

IntermediateHyperMesh407 reports

Fix damaged surfaces, build a 2D tria mesh on the outer skin with good flow and few distorted elements, then convert it into a 3D tetra mesh with HyperMesh's tetra tools and check every tetra for tet collapse, re-meshing where too many fail.

Make it a final-year project: Compare first-order (4-node) and second-order (10-node) tetras on the same part in a static run, and show why industry prefers the second-order ones.

Learn it in HyperMesh for FEA Plastic and Sheet Metal Applications

Assembly, connection, morphing and automation project ideas

What turns separate meshed parts into a model a solver can use, and how teams save time on it.

Bolts, spot welds and seam welds on a rear door

IntermediateANSA (Nastran deck)392 reports

A meshed car body is many parts held together by connections. Split the rear door into its parts with separate property IDs, then add bolts, spot welds, seam welds and CBUSH spring elements in ANSA's Nastran deck, and check that every connection actually links the parts it should.

Make it a final-year project: Run a door sag load case (a weight on the open door's latch end) with and without the seam welds, and show how much they add to stiffness.

Learn it in Preprocessor for Structural Analysis using ANSA

Rear suspension assembly: shells, solids and connections

AdvancedANSA247 reports

The ANSA course's final project, close to a real job: one assembly that needs every skill. Shell mesh the sheet parts on their mid-surfaces, tria mesh the tyre and rim (6.5 mm average), volume mesh the thick cast parts, connect the sub-components and mirror the model across the symmetry plane.

Make it a final-year project: Turn the model into a durability load case: fix the body mounts, apply a pothole force at the wheel centre and find the most stressed part.

Learn it in Preprocessor for Structural Analysis using ANSA

Morphing a meshed part without re-meshing

IntermediateANSA281 reports

Design changes often arrive after the mesh is done. Morphing moves the existing nodes to the new shape instead of meshing again. You practise the morphing tools on one sheet metal part, then raise the height of the doghouses and ribs on a second part and check that element quality survives.

Make it a final-year project: Morph a rib height in three steps, run a stiffness load case at each, and plot stiffness against rib height: a small design study.

Learn it in Preprocessor for Structural Analysis using ANSA

TCL/TK macros that automate HyperMesh

AdvancedHyperMesh, TCL/TK35 reports

Meshing teams script the boring parts. Build a master window with buttons that run your own utilities (fix normals, delete empty components, find free edges, renumber, check quality), and a macro that writes a quality report for a HyperMesh model.

Make it a final-year project: Time a manual model check against your macro on three models and put the minutes saved in your report: it is the number interviewers remember.

Learn it in Automation using TCL/TK for HyperMesh

CFD meshing project ideas in ANSA

Surface meshes, wraps and volume meshes for flow: from a valve to a full vehicle in a wind tunnel.

Surface mesh of a pressure valve at three element sizes

BeginnerANSA440 reports

The first CFD meshing exercise: fix the topology of a pressure relief valve, then build tria surface meshes at 1, 3 and 5 mm target length and explain which one you would send to the solver, and why.

Make it a final-year project: Run the three meshes in a CFD solver at the same inlet pressure and show how far the flow rate moves between them.

Learn it in Advanced CFD Meshing using ANSA

Turbocharger volume mesh for CFD

IntermediateANSA403 reports

Clean up a turbocharger model full of overlapping and open surfaces until it encloses proper volumes, surface mesh it to the quality criteria, and fill the flow volumes with a volume mesh ready for a solver.

Make it a final-year project: Add prism (boundary) layers on the walls and report the first-layer height you chose for a target y+.

Learn it in Advanced CFD Meshing using ANSA

BMW M6 in a virtual wind tunnel

IntermediateANSA358 reports

External aerodynamics meshing: repair the car body's topology (open edges, missing intersections), mesh one half with element sizes that vary part by part, mirror it with the symmetry tools, build the wind tunnel box around the car and mesh the air volume.

Make it a final-year project: Add a refinement box in the wake behind the car and compare cell count and drag between the meshes.

Learn it in Advanced CFD Meshing using ANSA

Surface wrap of an engine and gearbox assembly

IntermediateANSA371 reports

Under-hood thermal and flow models cannot use every bolt and gap of the CAD. Clean the engine, transmission and gearbox models, delete the surfaces you do not need, merge the three and wrap them in one watertight skin at a 3 mm constant length.

Make it a final-year project: Wrap at 3, 6 and 10 mm and show which features of the engine each size loses.

Learn it in Advanced CFD Meshing using ANSA

Tesla Cybertruck external CFD mesh

AdvancedANSA376 reports

The CFD meshing course's final project. Prepare the truck geometry with the topology tools, give each part (body, wheels, mirrors, underbody) its own target length, build the flow domain around it and generate the volume mesh for an external aerodynamics run.

Make it a final-year project: Run the mesh in OpenFOAM or Fluent and compare your drag coefficient with published figures for the truck, explaining the gap.

Learn it in Advanced CFD Meshing using ANSA

Before you start

These are skill-building projects from Skill-Lync courses, not ready-made final-year submissions. Every one starts from a course-provided CAD model (the hood, the instrument panel, the BMW, the Cybertruck), so a final-year project needs a question of your own on top, which is what the extension ideas are for.

Most of these projects stop at the mesh: they do not run a solver. That is honest to the job (meshing is a role of its own), but if you want results, the extension ideas add a load case or a CFD run.

The reports are learner submissions. Quality varies, and some contain mistakes, so treat them as a view of the work, not as answers. Many learners did the same challenge, so several examples share a title. Copying one will not get past a viva or a tool test.

Questions students ask

What are good HyperMesh projects for a beginner?

Start with a car hood: extract the mid-surfaces, mesh at a 5 mm target and pass a quality table (in the course version: aspect ratio up to 5, warpage 15, skew 45, quad angles 45 to 135 degrees, at most 10% trias). Then mesh a plastic door inner panel and a spare wheel holder, and finish with a 3D tetra mesh. Each one teaches a skill the next one needs.

Is HyperMesh free for students?

Yes, as a student edition. As of 16 Nov 2026 Siemens, which bought Altair in 2025, offers a free Simcenter HyperMesh student edition through Altair One. You sign up with the email address your college gave you, the licence key lasts a year and can be renewed, and the solver package includes OptiStruct and Radioss. It is for learning, not paid work.

Is ANSA free for students?

We found no free student download of ANSA as of 16 Nov 2026. BETA CAE Systems, which makes ANSA and has been part of Cadence since June 2024, supports universities through academic programmes and university licences. Ask your department or CAE lab whether it holds one before you plan an ANSA project at home.

HyperMesh or ANSA: which should I learn?

Both are used for the same work: cleaning CAD, mid-surfacing, shell and solid meshing, connections and morphing. HyperMesh is very common for structural and crash pre-processing; ANSA is strong in automotive structural work and in CFD meshing (surface wrap, wind tunnel meshes). Learn one well first, then check which one the companies you are applying to name in their job ads.

What is a mid-surface and why do meshers extract it?

A sheet metal or plastic part is thin compared with its size, so instead of filling its thickness with solid elements you model the surface halfway through the wall and give the shell elements a thickness. The model gets far smaller and solves much faster. Extracting a clean mid-surface, by hand where the automatic tool fails, is the core skill in most meshing jobs.

What do the mesh quality criteria mean?

They are limits on how distorted an element may be. Aspect ratio compares the longest side with the shortest, warpage measures how far a quad is from flat, skew how far it is from a rectangle, and the Jacobian how far it is from an ideal shape (1 is perfect; the ANSA challenges set 0.7 as the minimum). Tria share caps the triangles, which are stiffer than quads. Badly shaped elements give wrong stresses even when the mesh looks fine.

Turn a project into a job-ready portfolio

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.