Revit projects and BIM practice ideas

11 Revit projects that Skill-Lync learners have actually done, 3,706 public reports in all: a two-storey house built week by week on levels and grids, checked against the National Building Code, analysed in Robot and costed from schedules, then four projects with a full drawing set, linked models, Dynamo and Navisworks. Each has the challenge inputs, real reports and a way to take it further.

As of 21 Nov 2026: 3,706 of 1,41,067 public learner reports match one of these ideas · Counts are reports, not unique students

How to pick one

  1. Keep one model all the way through. The course builds one house from week 2 to week 5 and finishes it as a drawing set in Project 1; the week 6 to 8 model then feeds the schedules, the cost estimate and the Navisworks project. That is how BIM works in an office: drawings, quantities, clashes and the timeline come from one model, so a change in one place shows up everywhere.
  2. Check it against a rule, not just by eye. Measure every room against the National Building Code, check that the grids of the linked models line up, and give the analysis results as numbers. A model that has been checked is worth more in an interview than a nicer render.
  3. Finish with sheets. Each project ends in printed sheets: plans, sections, elevations, schedules and rendered views. A BIM coordinator looks for a clean, numbered drawing set (A101, S101, A-501) in your portfolio, not screenshots of the 3D view.

One house, week by week

From the first template to a furnished two-storey house on levels and grids.

First steps in Revit: templates, walls, 3D views and project information

BeginnerRevit296 reports

Week 1. Start a project from a structural, architectural or construction template, save it and reopen it, then draw a rectangular wall layout of about 40'-0" × 35'-0" and dimension it with aligned dimensions. Swap wall types, save a named 3D view, orbit it with the ViewCube, try the shaded, realistic and hidden-line styles and the sun path, and fill in Project Information. Three short questions close it: what the Analyze tab is for, which kinds of files Revit can link, and why the Collaborate tab exists.

Make it a final-year project: Set true north and your own city as the project location, then run a one-day solar study and note which façade gets the afternoon sun.

Learn it in Drafting and Design Using Revit

Levels, grids and a furnished layout of a home you know

BeginnerRevit291 reports

Week 2. Set up an architectural project (imperial or metric units, maximum backups 3), then levels at 0', 10' and 20' with the roof at 30', and two sets of grids: A to E at 10' and 1 to 10 at 20'. On that grid, lay out a home you know, measured with a tape or taken from a plan, and furnish it from the library with doors, windows, tables, chairs, a couch, a bed and lamps. Short answers on BIM versus 2D CAD and on categories, families, elements and instances come first.

Make it a final-year project: Save the units, levels and grids as your own project template (.rte) and start the next weeks from it. Time how long a new project takes with and without it.

Learn it in Drafting and Design Using Revit

Walls, floors and partition walls for a six-room house

BeginnerRevit282 reports

Week 3, on the same file: a floor with its material and thickness set, walls whose top and bottom are tied to levels, and both copied up to the first floor. Partition walls must give a 15' × 18' living room, a 9' × 11' dining room, bedrooms of 9' × 12' and 15' × 11', a 10' × 12' rest room and an 8' × 10' kitchen, each furnished as listed (a TV desk in the living room, a bath tub in the rest room, a gas stove cabinet in the kitchen). Two questions: why connect walls to levels, and is By Height or By Depth more convenient?

Make it a final-year project: Add a room schedule in square metres with a formula that flags rooms below the NBC 2016 minimums (one habitable room of 9.5 m², the others 7.5 m², a kitchen 5.0 m², a bathroom 1.8 m²). Every room in this brief passes; the FAQ below shows the numbers.

Learn it in Drafting and Design Using Revit

Codes, teamwork, analysis and quantities

What turns a model into BIM: NBC checks, central models, structural analysis in Robot, schedules and cost.

Check the house against India's National Building Code

BeginnerRevit, NBC 201633 reports

Week 5. Eight questions on the National Building Code: why codes matter while you model, which parts apply, the steps of a construction project and the disciplines in it, the occupancy class of five buildings (a four-unit apartment, a school for 1,000 students, a single shop, a shopping complex and a steel machine factory), and design versus management teams. Then look up the NBC limits on height, area, room sizes, wall height and passageways and revise the week 2 to 4 house to meet them.

Make it a final-year project: Put the NBC minimums into Revit as shared parameters and build a schedule that shows pass or fail for every room, so the check reruns whenever the plan changes.

Learn it in Drafting and Design Using Revit

Worksharing: central models, shared coordinates and Copy/Monitor

IntermediateRevit263 reports

Week 6. Set the project base point and shared coordinates in an architectural file, make a structural file with the same settings, turn both into central models and Synchronize with Central. Bring the grids and levels from the architecture model into the structure model with Copy/Monitor, then link both into a construction-template central file through Manage Links and check that the grids line up: origin to origin, by shared coordinates, or base point to base point. A flow chart of the project tree and how many people can work at once ends it.

Make it a final-year project: Work in it with a friend as two users with worksets: borrow elements, move a monitored grid in the architecture model and record what Coordination Review shows in the structure model. None of the reports here shows that step.

Learn it in Drafting and Design Using Revit

HVAC ducts, then structural analysis in Robot

IntermediateRevit, Robot Structural Analysis241 reports

Week 8 has two halves. HVAC: what it is, then a system on every floor of the week 7 building with an air handling unit, ducts and air terminals, sized and placed in the Properties browser (most learners model it in a mechanical template linked to the building). Structure: install the Revit to Robot link, export the analytical model to Robot Structural Analysis, state the support conditions, take floor loads from the codes, set load combinations, and report the maximum moment and displacement on each floor and the sway under lateral loads. Short answers on energy analysis and sustainability close it.

Make it a final-year project: Use the IS 456 Table 18 load factors (1.5 on dead plus imposed load, 1.2 on each when wind is added) and put the results in a table: maximum moment and drift on every floor. None of the reports here gives the numbers.

Learn it in Drafting and Design Using Revit

Schedules, a room schedule and a cost estimate from the model

BeginnerRevit236 reports

Week 9, on the week 6 to 8 building: schedules of walls, doors, windows and materials (concrete and wood), a room schedule with area, volume and room tags, then a cost: unit rates for each material from the internet, a total cost of materials and a take-off per material. Also the shortcut keys for 13 everyday commands (BX section box, CS create similar, TL thin lines, AL align, MV move, CO copy, MM mirror, AR array and more), the parameters of a wall, floor, door, window, table and building, and three flow charts, one of them for choosing a structure's framing in Dynamo.

Make it a final-year project: Price the take-off from a published schedule of rates (CPWD's Delhi Schedule of Rates or your state PWD's) instead of internet guesses, add a calculated Total Cost field, and export it to Excel to check one wall by hand.

Learn it in Drafting and Design Using Revit

The four course projects

A full drawing set, linked architecture and structure models, Dynamo and Navisworks.

Project 1: the house as a drawing set, from roof to camera views

IntermediateRevit570 reports

Finish the house as drawings. A ceiling above the first floor, a roof by footprint at a 10° slope, architectural plans (walls, floors, all components) and structural plans (walls, floors, columns) for each floor dimensioned to the grids, four elevations and a section through every room. Then the sheets: A101 to A103 for the floor and roof plans, S101 to S103 for the structural and roof framing plans, A201 and A202 for the elevations, and camera views of the living room, dining room and a bedroom from A-501 onwards.

Make it a final-year project: Add a sheet index and view templates so every sheet shares scale and line weights, then export the set to PDF and DWG and check it opens cleanly in AutoCAD.

Learn it in Drafting and Design Using Revit

Project 2: linked architectural and structural models of an apartment, office or school

AdvancedRevit535 reports

Choose a multi-unit apartment, an office or a school, state your site assumptions and the NBC rules that follow, then build two linked models. Structure: foundations, columns on the grid, beams, roof framing, floors and openings for stairs and lifts. Architecture: finished walls, a façade, partitions, furniture, stairs and lifts, at least one side in a glass curtain wall, inside and outside lighting, and topography with trees and parking. Deliver plans, elevations and sections on sheets, rendered interior, exterior and structural-framing views, and print the set.

Make it a final-year project: Check the building against NBC 2016 Part 3 clause 9.4.1(a): height not more than 1.5 times the width of the road plus the front open space. The reports here quote the rule without the open space; do the full check, and a floor area ratio check under your city's bylaws.

Learn it in Drafting and Design Using Revit

Project 3: Dynamo, from a sine surface to a parametric tower

IntermediateRevit, Dynamo488 reports

Five Dynamo exercises. A sine surface: integer sliders into Range, Math.Sin times an amplitude, Point.ByCoordinates and NurbsCurve.ByControlPoints, then three curves lofted with Surface.ByLoft. Walls from a Dynamo outline (Line.ByStartPointEndPoint into Wall.ByCurveAndHeight, optionally a floor). Four columns turned by a slider with FamilyInstance.SetRotation. A conceptual-mass column with a divided, triangle-panelled surface. And a parametric 'stadium' that almost every report builds as a twisting tower, with sliders for the number of levels, floor height, bottom and top rotation, width and length.

Make it a final-year project: Drive the twisting tower from an Excel sheet and write the floor area of each level back to it, so one table controls the form and reports its area.

Learn it in Drafting and Design Using Revit

Before you start

Every report here comes from one Skill-Lync course, Drafting and Design Using Revit, including batches inside the PG building programs. Its questions have stayed the same since 2020, so the inputs quoted come from what several learners copied from the challenge sheets.

Some reports repeat each other word for word, and some read like generic text from the web. We counted every public report but picked the examples by hand: learners' own work, the original where two reports match.

Reports are learner submissions from 2020 to 2025 and many are mostly screenshots. Several contain mistakes (a ceiling drawn with the roof tool, the NBC height rule without the front open space, load combinations that are not in IS 456), so read them as examples of the work, not as answers.

Questions students ask

What are good Revit projects for civil engineering students?

One building taken all the way: levels and grids, walls, floors and rooms, a code check, linked architectural and structural models, schedules and a cost estimate, then a numbered drawing set. Add Dynamo for a parametric form and Navisworks for clash detection and a 4D timeline. The 11 projects on this page follow exactly that order.

Do the room sizes in the Revit house challenge meet the National Building Code?

Yes. NBC 2016 Part 3 wants one habitable room of 9.5 m², the others 7.5 m² (2.1 m wide) and a kitchen of 5.0 m². The smallest room in the brief, the 9' × 11' dining room, is 9.20 m²; the 8' × 10' kitchen is 7.43 m². Height is tighter: levels 10' apart give 3.05 m, and rooms need 2.75 m clear.

Why does my Dynamo sine curve look flat or half-finished?

Dynamo's Math.Sin takes degrees, not radians. With a Range of 0 to 10 and an amplitude of 50, the curve never rises above 50 × sin 10° = 8.7, so it looks flat. A Range of 0 to 720 in steps of 10 gives 73 points and two full waves. One report uses 10 to 200: 191 points, just over half a wave.

What do the clash test types and statuses in Navisworks mean?

Clash Detective (Navisworks Manage) has four test types: Hard (objects actually intersect), Hard (Conservative), Clearance (closer than a set distance, hard clashes included) and Duplicates (identical objects in the same place). Statuses are New, Active, Reviewed, Approved and Resolved, which means gone in the latest run. There is no 'neglected' status.

Which Skill-Lync course are these Revit challenges from?

All 3,706 reports come from the weekly challenges and projects of Drafting and Design Using Revit, a 12-week course that also runs inside Skill-Lync's postgraduate building programs. The 2020 and 2021 batches used titles such as "REVIT_Dynamo Project-3" for the same questions, so those reports are counted with the newer ones.

Turn a project into a job-ready portfolio

Talk to a counsellor.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.