AutoCAD projects and practice plans
14 AutoCAD practice drawings and projects that Skill-Lync's civil engineering learners have actually done, 6,473 public reports in all. They start with coordinates and editing, move through floor plans, a wardrobe detail, sections and hatched elevations, then schedules, title blocks and plotted sheets, and end in 3D with a rendered house. Each comes with what the sheet asks for, real reports to read, and one way to take it further.
As of 18 Nov 2026: 6,473 of 1,41,067 public learner reports match one of these ideas · Counts are reports, not unique students
How to pick one
- Do them in order. The challenges build on each other. Coordinates and editing come first, plans and details next, then schedules, blocks and plotted sheets. The Week 7 plan and section come back in Weeks 9 and 10, so skipping ahead means redrawing.
- After Week 7, draw a real building. Practice sheets teach the commands. Measuring your own house or hostel and drawing its plan, section and elevation teaches what a plan has to show, which is what a site engineer or a drafting test checks.
- Show a drawing set, not single drawings. For a drafting or site job, one building drawn as plan, section, elevation, schedules and a plotted sheet at 1:50 or 1:100 says more than twelve unrelated exercises. Project 1 is that set; Project 2 adds the 3D view.
2D drafting basics
Points, coordinates and the editing commands every later drawing depends on.
Geometries by absolute, relative and polar coordinates
Week 1. Draw the first two shapes on the sheet three times, once with each way of entering points: absolute (x,y from the origin), relative (@x,y from the last point) and polar (@length<angle). Draw the other eight with whichever method you like, then a roof profile and a set of trusses, and dimension everything.
Make it a final-year project: Time yourself: redraw the trusses from a real roof (a college workshop or a shed) to scale, then label member lengths and the pitch angle you measured.
Learn it in AutoCAD Essentials for Civil Engineers
Sketching and editing: chamfer, fillet, offset and mirror
Week 3. About ten dimensioned shapes, some in decimal units and some in feet and inches, entered as polar points such as @2.12<45 or @2'10"<45. Then clean them up with chamfer, fillet, offset, trim and mirror. It is the week where drawing stops being clicking and starts being typing.
Make it a final-year project: Draw one shape two ways, by points and by offsets and trims, and count the commands each method takes.
Learn it in AutoCAD Essentials for Civil Engineers
Building plans, sections and details
Floor plans, footings, a wardrobe and a kitchen, sections and hatched elevations.
Wall footing, isolated footing, floor plan and isometric steps
Week 2. A cross-section of a load-bearing wall on a stepped spread footing, built up from a 0.90 x 0.25 m base course; a cross-section of an isolated footing whose sloped top comes from a chamfer (0.25 and 0.38 in the newest report); a small floor plan; and an isometric view of steps and a gable wall.
Make it a final-year project: Take the footing sizes from a real design (a textbook example or an IS 456 worked problem) and draw the reinforcement in the section with proper cover.
Learn it in AutoCAD Essentials for Civil Engineers
Residence plan, seating plan, toilet and utility room plan
Week 4: three plans. A 25' x 43'-6.5" residence in feet and inches with 9" walls, doors, windows, a kitchen platform, cupboards and a staircase made with an array, each on its own layer. An auditorium-style seating plan (a 500 x 280 hall with a semicircular front, seats placed by array). A 2,350 x 4,550 mm toilet and utility block with sanitary fittings dragged in from DesignCenter.
Make it a final-year project: Measure your own home or hostel room with a tape and draw it the same way, with furniture blocks and a door and window schedule.
Learn it in AutoCAD Essentials for Civil Engineers
Wardrobe detail drawing, floor plan, kitchen layout and column details
Week 6, the annotation week. A wardrobe drawn in plan, front elevation, carcass elevation, sections 1-1 and 2-2 and side elevation, all in mm with proper text and dimension styles. Then a floor plan (230 mm outer walls, 150 mm inner walls, stairs with 300 mm treads and 150 mm risers, traced over an imported PDF scaled by reference), a kitchen layout, a column detail with 8, 16 and 25 mm bars, and a raft foundation layout.
Make it a final-year project: Design a wardrobe for a real room: pick shutter, shelf and drawer sizes from what a carpenter can buy (18 mm board), and add a cutting list of every panel.
Learn it in AutoCAD Essentials for Civil Engineers
Building plan, section and elevation with dimensions
Week 7. Draw a building plan, then project section A-A and the front elevation from it with construction lines (XLINE) so every wall, opening and floor level lines up. Windows become blocks, columns are hatched, sunshades use their own linetype, and the staircase follows the given risers and treads. Weeks 9 and 10 reuse this drawing.
Make it a final-year project: Draw a second section through the staircase and check the clear headroom at every step against your local building bye-laws (usually 2.1 to 2.2 m).
Learn it in AutoCAD Essentials for Civil Engineers
Kitchen layout, hatched elevation and an industrial building section
Week 9, the hatching week. A kitchen layout with 230 mm walls and the door and window as blocks; the elevation of the Week 7 building with walls, doors and windows hatched by material; and a section through an industrial building with annotations.
Make it a final-year project: Draw the section of a real industrial shed (truss, purlins, sheeting, column and footing) from photos and published dimensions, and label each material with its standard hatch.
- Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad 2025
- layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad 2023
- AutoCAD_Layout of Kitchen Cabinet, Elevation of a Residential Building and Industrial Building section_Week 9 2021
Learn it in AutoCAD Essentials for Civil Engineers
Schedules, blocks and drawing sheets
Column and window schedules, a bar bending schedule, title blocks and plotted layouts.
Column schedule, window schedule and a drawing template
Week 5. A column schedule table with column sizes and bar details drawn in each cell, a window schedule, and a drawing template with general notes. Most of the work is text styles and table layout: architectural units, a romans.shx font, rotated text for the narrow columns.
Make it a final-year project: Build the column schedule for a real G+2 building from its structural design (or a published example) and add the steel quantity per column type.
Learn it in AutoCAD Essentials for Civil Engineers
Bar bending schedule, door types, legend and title blocks
Week 8, the blocks week. Two title blocks for an A2 sheet (594 x 420 mm) with attributes, saved as blocks; warehouse and residential door types drawn to size and blocked; an electrical legend whose symbols are blocks; and bar shapes made into blocks and placed in a bar bending schedule table.
Make it a final-year project: Fill the schedule with real numbers: cut length for each shape from the bend deductions, and weight from d squared over 162 kg per metre (a 12 mm bar weighs about 0.89 kg/m), then total the steel.
- Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad 2025
- AutoCAD_Reinforcement Bar Shapes, Types of Doors, Creating symbols legend and Creating standard template_Week 8 2021
- Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad 2024
Learn it in AutoCAD Essentials for Civil Engineers
Layouts, viewports at 1:50 and plotting
Week 10. Take the Week 7 drawing and the kitchen plan, save named views, and set up an A1 layout from a template. Draw two viewports, set each to 1:50 and lock it, fill in the title block with ATTEDIT and plot the sheet. This is how a drawing leaves the office.
Make it a final-year project: Make a full drawing set from one building: plan, section, elevation and details on numbered sheets with a common title block and a sheet index.
Learn it in AutoCAD Essentials for Civil Engineers
AutoCAD 3D projects
Structural elements and a room modelled in 3D from 2D drawings.
3D models: furniture, footing, girder, drop column and walls
Week 11. Five small 3D models from 2D outlines: a 3' x 2'6" piece of furniture extruded 2'6"; an isolated footing with a 3' x 3' base, 6" thick, sloping up to a 1' x 1' top 2' high; an AASHTO-type bridge girder extruded 10'; a drop column with a 4'6" square panel and a 1'6" round column 10' tall; and walls with a door opening subtracted, including a gable wall.
Make it a final-year project: Model the footing at its real design size, then use MASSPROP to get its volume and compare it with the concrete quantity you get by hand from the frustum formula.
Learn it in AutoCAD Essentials for Civil Engineers
3D isometric view of a room with windows, a facade and a staircase
Week 12. Turn a plan and two elevations into a 3D room: 10' floor height, 4" floor and 6" roof slabs, and windows with frames, mullions and handles set 3' above the floor. Then a building facade, a staircase and a wall on its footing.
Make it a final-year project: Model the staircase of your own building from measured risers and treads and check it against the plan.
Learn it in AutoCAD Essentials for Civil Engineers
AutoCAD course projects
Two end-of-course projects: a complete drawing set for a plot, then the same house in 3D.
Project 1: architectural plan and structural drawings for a plot
Design a house for a given plot (in one recent report, 18.3 x 6 m, facing east): floor plan, section and elevation, then the basic structural drawings, meaning column, beam and footing layouts. You choose the room sizes, wall thicknesses (230 mm outer, 150 mm inner is typical), column sizes and door and window schedule yourself.
Make it a final-year project: Check the plan against your city's building bye-laws (setbacks, ground coverage, parking) and size the columns and footings with a load estimate before you draw them.
- AutoCAD_Developing Architectural and Structural drawing_Project 1 2020
- Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings - AUTO CAD 2022
- Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings 2024
Learn it in AutoCAD Essentials for Civil Engineers
Project 2: 3D rendered model of a residential building
Build the house in 3D from its plan and elevation: extrude the walls, cut the doors and windows with subtract, add slabs, sunshades, parapets and balconies, then apply materials, set a camera and render.
Make it a final-year project: Render the same model at two times of day with real sun angles for your city, and show which rooms get direct sun.
Learn it in AutoCAD Essentials for Civil Engineers
Before you start
Every report here comes from Skill-Lync's AutoCAD Essentials for Civil Engineers. The mechanical AutoCAD course (part drawings, assemblies and GD&T) is newer and has no public reports yet; mechanical drafting ideas are on the SolidWorks and CATIA pages.
The dimensions quoted are from the newest learner reports of each challenge, not from the official sheet, and the sheet has changed a little between batches. Use them to judge the size of the task, then follow the sheet you are given.
The reports are learner submissions from 2020 to 2025. Many show only screenshots, quality varies and some contain mistakes, so read them as a view of the work, not as answers to copy.
Questions students ask
Where can I find AutoCAD plans for practice?
This page lists the 14 practice sheets and projects of Skill-Lync's civil AutoCAD course, each with real learner reports you can open. A good first plan is the Week 4 residence: a 25' x 43'-6.5" house with 9" walls, doors, windows, a kitchen platform and a staircase. Then the Week 6 floor plan, with 230 mm outer walls, 150 mm inner walls and 300 mm treads.
What are good AutoCAD projects for civil engineering students?
A complete drawing set for one building: floor plan, section and elevation, then column, beam and footing layouts, a column schedule and a bar bending schedule, plotted on a titled sheet. That is Project 1 here. Add the 3D rendered model (Project 2) if you want to show 3D.
Is AutoCAD free for students?
Yes, through the Autodesk Education plan: eligible students and educators get free one-year access that can be renewed while they remain eligible (checked 16 Nov 2026). You sign up with proof of enrolment, and the licence is for learning, not paid work.
How do you calculate steel weight in a bar bending schedule?
Weight per metre of a bar is d squared over 162 kg, with d in mm (that is the bar's area times steel's density of 7,850 kg per cubic metre). So 8 mm is 0.395 kg/m, 10 mm 0.617, 12 mm 0.889 and 16 mm 1.58. Multiply by the cut length and the number of bars, then add up each diameter.
Can AutoCAD do 3D, or do I need Revit?
Full AutoCAD does 3D solids, surfaces and rendering, which Weeks 11 and 12 and Project 2 use. AutoCAD LT is 2D only. Revit is different: it models walls, slabs and beams as building elements carrying data, so schedules and quantities come from the model. Offices often use both.
Will one of these do as a final-year project?
Not as set. Every challenge starts from the same course sheet, so thousands of reports look alike and a viva will ask what you added. Use the extension under each one: a real building you measured, a check against bye-laws or IS codes, or quantities worked out from your drawing.