Week 3 Challenge: Shell (2D) Meshing of an Automobile Hood using ANSA Preprocessor tool   Course: Preprocessor for Structural Analysis using ANSA   Submitted by: Amanpreet Singh Whan   Supervisor: David Nirmal Paul    October 13, 2020               Abstract…

    Week 4 Challenge: Shell (2D) Meshing of Bottle Cap Model using ANSA Preprocessor tool   Course: Preprocessor for Structural Analysis using ANSA   Submitted by: Amanpreet Singh Whan   Supervisor: David Nirmal Paul   November 4, 2020       Abstract    A bottle cap…

    Tool Test 1 Challenge: SHELL (2D) MESHING OF tool test 1 Model USING ANSA PREPROCESSOR TOOL   Course: Preprocessor for Structural Analysis using ANSA   NOVEMBER 9, 2020        Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul   Abstract   The switch…

    Week 5 Challenge Task: Solid (3D) MESHING OF REAR-VIEW Mirror cad MODEL USING ANSA PREPROCESSOR TOOL Course: Preprocessor for Structural Analysis using ANSA NOVEMBER 18,2020 Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul     Abstract The report presents a strategy that was adopted…

    Tool Test 2 Challenge Task: Solid (3D) MESHING OF intake manifold cad MODEL USING ANSA PREPROCESSOR TOOL   Course: Preprocessor for Structural Analysis using ANSA   NOVEMBER 18, 2020         Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul  …

    Week 6 Challenge Task: Deploying connections on the vehicle rear door Meshed model USING ANSA PREPROCESSOR TOOL   Course: Preprocessor for Structural Analysis using ANSA   December 12, 2020         Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul…

  Week 8 Challenge Task: PRACTISING OF THE MORPHING techniques ON THE GIVEN SHEET METAL COMPONENT Course: Preprocessor for Structural Analysis using ANSA   December 21, 2020   Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul     Abstract Morphing enables the analyst to create…

  Project 1 Challenge: Shell (2D) Meshing of Ip substrate Model using ANSA Preprocessor tool Course: Preprocessor for Structural Analysis using ANSA Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul January 30, 2021   Abstract A vehicle instrument panel assembly typically comprises a variety of…

  Project 2 Challenge: Meshing of the Suspension Assembly using ANSA Preprocessor tool Course: Preprocessor for Structural Analysis using ANSA Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul February 04, 2021   Abstract  The suspension is the system of tires, tire air, springs, shock absorbers, and linkages…

  Week 4 Challenge: 1D ELEMENT CHALLENGE Course: HyperMesh for FEA Plastics and Sheet Metal Applications February 24, 2021 Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul     List of Figures Figure 1- Imported given Parallel Bracket CAD Model.  Figure 2- Clear Parallel Bracket CAD Model. …

  Week 6 Challenge: Meshing of HOOD Challenge Course: HyperMesh for FEA Plastics and Sheet Metal Applications March 16, 2021 Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul     List of Figures Figure 1-Imported given Hood CAD Model.  Figure 2-Outer Extract Mid Surface.  Figure…

  Week 8 Challenge:3D tetra meshing CHALLENGE Course: HyperMesh for FEA Plastics and Sheet Metal Applications April 07, 2021 Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul   List of Figures Figure 1- Imported given CAD Models.  Figure 2-Patched up given CAD model.  Figure 3-Tetra Meshed…

  Week 9 Challenge: Creation of 1 D Connectors Challenge Course: HyperMesh for FEA Plastics and Sheet Metal Applications April 10, 2021 Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul   List of Figures Figure 1- Imported given CAD Model.  Figure 2- Patched up given CAD Model.  Figure…

  Project 1 Challenge: Meshing of the Door Inner Panel Challenge Course: HyperMesh for FEA Plastics and Sheet Metal Applications Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul May 16, 2021   List of Figures Figure 1-Imported given Door Inner Panel CAD Model.  Figure 2- Extracted Mid…

  Project 2 Challenge: Meshing of Rear Wheel Holder Challenge Course: HyperMesh for FEA Plastics and Sheet Metal Applications Submitted by: Amanpreet Singh Whan Supervisor: David Nirmal Paul May 25, 2021    List of Figures Figure 1-Imported given Rear Wheel Holder CAD Model.  Figure 2-Extracted Mid…

  Week 1 Challenge: Constituency of Units CHALLENGE Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D June 01, 2021      Table of Contents 1 Introduction. 2 Aims. 3 Conversion from SI unit to gm/mm/ms unit. 4 Conclusion. 5 Appendix.  …

  Week 2 Challenge: EXPLICIT AND IMPLICIT ANALYSIS CHALLENGECourse: LS-DYNA for Structural Mechanics/ FEASubmitted by: Amanpreet Singh WhanSupervisor: Tholkappiyan D June 06, 2021   Table of Contents 1 Introduction 2 Aims 3 Explicit and Implicit Analysis 4 Explicit and Implicit Calculations 5…

  Week 3 Challenge: Drop Test Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D June 30, 2021    Table of Contents 1 Introduction. 2 Aims. 3 Methodology. 4 Results. 5 Conclusion. 6 Appendix.    1 Introduction LS-DYNA is an…

  Week 4 Challenge: Crash BoxSimulation Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D July 9, 2021   Table of Contents 1 Introduction. 2 Aims. 3 Methodology. 4 Results. 5 Conclusion.   1 Introduction LS-DYNA is an advanced general-purpose…

  Week 5 Challenge: Modelling Spotwelds Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D July 18, 2021    Table of Contents 1 Introduction. 2 Aims. 3 Methodology. 4 Results. 5 Conclusion. 6 Appendix.   1 Introduction LS-DYNA is an…

  Week 6 Challenge: Calculate the Stretch Ratio by comparing the ELFORM (-2, -1,1,2) with Ogden_Material Model Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D July 28, 2021      Table of Contents 1 Introduction. 2 Aims. 3 Methodology.…

  Week 7 Challenge: Pedestrian Head Impact Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D August 08, 2021      Table of Contents 1 Introduction. 2 Aims. 3 Methodology. 4 Results. 5 Conclusion.     1 Introduction  …

  Week 8 Challenge: Mass Scaling Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D August 18, 2021     Table of Contents 1 Introduction. 2 Aims. 3 Methodology and Results. 4 Conclusion.     1 Introduction LS-DYNA is an advanced…

  Week 9 Challenge: Material Modelling From raw data Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D September 01, 2021      Table of Contents 1 Introduction. 2 Aims. 3 Methodology. 4 Results. 5 Conclusion.     1 Introduction…

  Week 10 Challenge: Hyper-Elastic Material Models Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D September 08, 2021      Table of Contents 1 Introduction. 2 Aims. 3 Methodology. 4 Results. 5 Conclusion.     1 Introduction…

  Week 11 Challenge: Joint Creation and demonstration Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D October 13, 2021     Table of Contents 1 Introduction. 2 Aims. 3 Methodology. 4 Results. 5 Conclusion.     1 Introduction LS-DYNA…

  Week 12 Challenge: Bird Strike into Aero Engine Challenge Course: LS-DYNA for Structural Mechanics/ FEA Submitted by: Amanpreet Singh Whan Supervisor: Tholkappiyan D November 25, 2021     Abstract Safety in accidental conditions is one of the important requirements an aviation jet engine must meet. It…

  Project 1 Challenge: 2D Meshing Challenge Course: Crashworthiness Analysis using HyperMesh and Radioss Submitted by: Amanpreet Singh Whan Supervisor: Harsha Chowdary December 02, 2021     List of Figures Figure 1-Imported given CAD Models.  Figure 2-Extracted Mid Surfaces of the given Models. …

Assignment 2: RADIOSS Engine File Editing & 3D Meshing Challenge Course: Crashworthiness Analysis using HyperMesh and Radioss Submitted by: Amanpreet Singh Whan Supervisor: Harsha Chowdary December 06, 2021   Answers:    1)   2)  3) Time for sound to travel the length of rail=0.1927…

  Assignment 3: 2D Element Formulation Challenge Course: Crashworthiness Analysis using HyperMesh and Radioss Submitted by: Amanpreet Singh Whan Supervisor: Harsha Chowdary December 18, 2021     List of Figures Figure 1-Imported given CAD Model.  Figure 2- Zero Energy Mode Generation for a Reduced…

  Assignment 4: Radioss Materials Laws Challenge Course: Crashworthiness Analysis using HyperMesh and Radioss Submitted by: Amanpreet Singh Whan Supervisor: Harsha Chowdary December 26, 2021     List of Figures Figure 1-Zero Energy Mode Generation for a Reduced Integrated Shell.  Figure 2-In-plane…

    Assignment 5: Radioss Interfaces and Study of the Effect of Notches Challenge Course: Crashworthiness Analysis using HyperMesh and Radioss Submitted by: Amanpreet Singh Whan Supervisor: Harsha Chowdary January 06, 2022     List of Figures Figure 1-Zero Energy Mode Generation for a Reduced Integrated…

  Assignment 6: Frontal Crash Simulation Challenge Course: Crashworthiness Analysis using HyperMesh and Radioss Submitted by: Amanpreet Singh Whan Supervisor: Harsha Chowdary February 02, 2022    List of Figures  Figure 1- Pictures representing Crash Tests performed for different Car Models. …

  Assignment 7: Side Pole Crash Simulation Challenge Course: Crashworthiness Analysis using HyperMesh and Radioss Submitted by: Amanpreet Singh Whan Supervisor: Harsha Chowdary February 06, 2022   List of Figures Figure 1- Pictures representing Crash Tests performed for different Car Models.  Figure…

  Week 1 Challenge: Stress concentration on the Plate with a hole Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G February 18, 2022      List of Figures Figure 1- Ansys Static Structural Analysis System Workflow.  Figure 2- 2D Sketch of…

  Week 1 Challenge: Spur Gear Challenge Course: Introduction to Structural Analysis using ANSYS Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G February 25, 2022     List of Figures Figure 1- Spur Gear Model. 4 Figure 2- Static Structural Analysis workflow and material defined for…

  Week 2 Challenge: Bevel Gear Challenge Course: Introduction to Structural Analysis using ANSYS Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 01, 2022     List of Figures Figure 1-Bevel Gear Model.  Figure 2-Static Structural Analysis workflow.  Figure 3-Imported…

  Week 2 Challenge: Rail Wheel and Track Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 02, 2022     List of Figures Figure 1- Rail Wheel and Track Mechanism.  Figure 2-Static Structural Analysis workflow.  Figure 3-Imported…

  Week 3 Challenge: Verifications of Weld Joints Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 03, 2022     List of Figures Figure 1- Types of Weld Joints.  Figure 2- Static Structural Analysis workflow for case 1.  Figure…

  Week 3 Challenge: Sheet Metal Bending Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 05, 2022     List of Figures Figure 1- Sheet Metal Bending process.  Figure 2-Static Structural Analysis workflow for case 1.  Figure…

  Week 4 Challenge: Rolling Operation Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 08, 2022     List of Figures Figure 1-Static Structural Analysis workflow for the challenge.  Figure 2-Imported given CAD Model.  Figure…

  Week 4 Challenge: Wire Bending Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 11, 2022     List of Figures Figure 1- Wire Bending Process.  Figure 2-Static Structural Analysis workflow for case 1.  Figure 3-Static…

  Week 5 Challenge: Sphere pressing on a plate Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 12, 2022      List of Figures Figure 1-Static Structural Analysis workflow.  Figure 2-Imported given CAD Model.  Figure 3-Meshed…

  Week 5 Challenge:iPhone bending Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 15, 2022     List of Figures Figure 1- Static Structural Analysis workflow for case 1.  Figure 2- Static Structural Analysis workflow for case 2. …

  Week 7 Challenge: Long Piston with Cam Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 18, 2022     List of Figures Figure 1- Static Structural Analysis workflow for the challenge.  Figure 2- Imported given CAD Model. …

  Week 8 Challenge: Universal Joint Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 23, 2022      List of Figures Figure 1- Static Structural Analysis workflow for case 1.  Figure 2- Static Structural Analysis workflow for…

  Week 8 Challenge: Worm Gear Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 23, 2022     List of Figures Figure 1- Transient Structural Analysis workflow.  Figure 2- Imported given CAD Model.  Figure 3- Meshed given…

  Week 9 Challenge: Tension and Torsion Test Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 24, 2022     List of Figures Figure 1- Explicit Dynamics Analysis workflow for case 1.  Figure 2- Explicit Dynamics Analysis workflow…

  Week 9 Challenge: Machining with Planer Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 24, 2022     List of Figures Figure 1- Explicit Dynamics Analysis workflow.  Figure 2- Imported given CAD Model.  Figure 3- Meshed…

  Week 10 Challenge: Bullet Penetrating a Bucket Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 25, 2022     List of Figures Figure 1- Explicit Dynamics Analysis workflow for case 1.  Figure 2- Explicit Dynamics Analysis workflow…

  Week 11 Challenge: Car Crash Simulation Challenge Course: Structural Analysis Using Ansys Workbench Submitted by: Amanpreet Singh Whan Supervisor: Vineet G March 26, 2022     List of Figures Figure 1- Explicit Dynamics Analysis workflow for Car Crash Simulation.  Figure 2- Imported given CAD…

Course: Python for Mechanical Engineers Challenge: Air Standard  Cycle Submitted By: Amanpreet Singh Whan    1 Aim: The aim of the week 2 challenge is to write code that can solve an otto cycle and make plots for it.   2 Theory and Governing Equations: The Otto Cycle is named after Nikolaus Otto (1832–1891,…

Course: Python for Mechanical Engineers Challenge: Solving Second-Order ODEs Submitted By: Amanpreet Singh Whan      1 Aim: The aim of the week 3 challenge is to write a program in python to solve second order Ordinary Differential Equation (ode).   2 Theory and Governing Equations: The simple…

  1)  What do popt and pcov mean? The popt and pcov are generally known as the output values of the python’s ‘curve fit’ inbuilt function. popt- The return value popt contains the best-fit values of the parameters or coefficient of a polynomial so that the sum of the squared residuals of f(xdata, *popt) – ydata is…

Course: Python for Mechanical Engineers Challenge:  Data Analysis Submitted By: Amanpreet Singh Whan    1 Aim: The aim of the week 6 challenge is to write a program to perform data analysis or parsing of the given Converge engine file using Python software.   2 Theory and Governing Equations: Data analysis…

Course: MATLAB for Mechanical Engineers Challenge: 2R Robotic Arm Challenge Submitted By: Amanpreet Singh Whan   1 Aim: The aim of the week 2 challenge is to write a program in MATLAB to simulate the forward kinematics of a 2R Robotic Arm   2 Theory and Governing Equations: A robotic arm is a type of mechanical…

Course: MATLAB for Mechanical Engineers Challenge: Solving Second-Order ODEs Submitted By: Amanpreet Singh Whan   1 Aim: The aim of the week 3 challenge is to write a program in MATLAB to solve second-order Ordinary Differential Equation (ode).   2 Theory and Governing Equations: The simple pendulum is…

Course: MATLAB for Mechanical Engineers Challenge: Genetic Algorithm Submitted By: Amanpreet Singh   1 Aim: The aim of the week 4 challenge is to write a code in MATLAB to optimize the stalagmite function and find the global maxima of the function.   2 Objectives: The objectives of the week 4 challenges are as…

Courser: MATLAB for Mechanical Engineers Challenge:  Parsing NASA thermodynamic data Submitted By: Amanpreet Singh Whan   1 Aim: The Project 1 challenge aims to write a program to perform data analysis or parsing of the given Thermo.dat file using MATLAB software.   2 Theory and Governing Equations:…

  Course: MATLAB for Mechanical Engineers Project 2: Rankine Cycle Simulator  Submitted By: Amanpreet Singh Whan     1 Aim: The aim of the Project 2 challenge is to create a Rankine Cycle Simulator using MATLAB software.   2 Theory and Governing Equations: The Rankine cycle or Rankine Vapor Cycle…