calculate the concrete mix design for M35 grade concrete with fly ash and M50 grade concrete without fly ash'   INTRODUCTION :     concrete mix design is the process of selecting suitable ingredients for producing  concrete of required strength, durability and workability as economcal as possible.…

AIM : - sketch a G+1 floor residential plan, according to vaastu shastra and list down the names of the structural drawings                required to be provided to the site for construction. - assume the sizes of the structural elements ( column, beam, slab, etc.)and accordingly…

AIM :      Create the geometries from P1 to P2 using all the coordinates system methods. we need to use the Line tool to create            the  geometries. Where required we need to use the circle tool.Using the Imperial Template and the Decimal Units to     …

  AIM :  creating a floor plan, footing detail and isometric view using autocad.     INTRODUCTION :  this project will help us to introduce various tools in autocad such as drawing rectangle, polylines, move, offsets, copy, rotate, drafting and setting dialog box etc. by using these tools we have…

  AIM : drafting of various geometries using chamfer, fillet tool in autocad.     INTRODUCTION :  in this project we will work on different sketches provided. for this sketches we have used different types of units such as decimal, architecttural, engineering etc. we are going to use different tools…

1. Residence Plan: Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of the doors.   AIM :  Sketch the layout of a residence…

    1. AIM : create column schedule with the help of lines. also, insert test with the help of dtext command or single line text. INTRODUCTION :  column schedule is a schedule in which the details of the column collected in the construction of design purpose. in this drawing we are creating schedule…

Q1. AIM :  Draw the elevation and details of a wardrobe as shown in the Figure below. INTRODUCTION:  we have drawn wardrobe diagram in autocad.we have provided dimensions ,text with the use of layers,                             …

  AIM :  Create the Plan and Sections as shown in the Figures.   INTRODUCTION : floor plans are made irrespective of the fact that they are to be utilised during the construction project. it include an understending nof the dimensions and different kind of installement. sections allow the architect…

 AIM:  Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East  c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections)              …

DIAGRAM 1.   AIM : Create the templates as shown in Figures.       INTRODUCTION :  The Title block of a drawing, usually located on the bottom or lower right hand corner, contain all the information necessary to identify drawing and to verify its validity. we have Taken the size of the title…

1. AIM : Create the layouts of the Kitchen and provide hatches pattern as shown.  INTRODUCTION : we have used blocks wherever required. we have Provided appropriate dimensions in the plan. we have Assumed the size of doors, appliances and others as per the standards.   PROCEDURE : step-1 - set unit to decimal…

1.   AIM : Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure.    INTRODUCTION : We have Used the MV command to create the viewport of the size as shown in Figure. Also, we have used ATTEDIT command to edit…

1. AIM : Create a 3D Furniture element as shown in the Figure.    INTRODUCTION : We have Assumed dimensions which are missing. we have used various new command of autocad    PROCEDURE : - open autocad  - open 3d modelling  - set unit > engineering inches - select visual style 2d wireframe…

AIM :  Create a 3D Isometric View of the building with plan and elevation given. INTRODUCTION: An isometric drawing is a 3D representation of an object, room, building or design on a 2D surface. we have used various command in this drawing such as extrude, subtract, boundary, union…

AIM : Create a 3 dimensional model of the residential building with a rendered view.   INTRODUCTION : In this project user have created a plan in 2d  then user have converted it into 3d using Autocad 3d, applying materials and rendering. user used many 3d commands to know the importnace of it such as subtract,…

1. AIM : From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately.   INTRODUCTION :  Revit is an autodesk project and building information modelling software for architects, structural engineer, mechanical and electrical engineers. in this…

1) What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. ans-  - BIM stands for building information modelling and it is workflow process. its based around models used for planning, design,    construction and management of buildinding and infrastructure projects. - Building…

1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created from…

1. AIM :  Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level.   INTRODUCTION : in this project we have provided ceiling to yhe building.    PROCEDURE : - open revit  - open week3 project …

1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ? ANS- - The national building code of india is a single document in which, like a network, the information contained in various indian        standards is woven into a pattern of continuity and cogency…

1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project   AIM : Using the Manage tab set project base point and project shared coordinates for the project   PROCEDURE : - open the revit software - select new > select imperial architectural…

  AIM :  Creating Architectural and Structural model with 3D rendering using REVIT     PROCEDURE :  1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings …

1) What are HVAC systems? Why are they essential in the modeling of buildings ans- - HVAC stands for heating, ventilation and air conditioning - it is a technology of indoor environmental comfort. its goal is to provide thermal comfort and acceptable indoor air quality.   essential in the modeling of buildings.…

  AIM : Preparing Schedule & Cost Estimation for a building using REVIT   PROCEDURE : 1) Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below           a. Using 3D model create a section box         …

  1. AIM : Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve.   INTRODUCTION : Dynamo is a visual programming add-in for autodesk revit. dynamo provides open source graphical programming, which enables custom computational design and automation process for…

1. AIM : Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class.   INTRODUCTION :  naviswork allows user to open and combine 3d model, navigate around them in real…

Question 1: a)     OBSERVATION- - concrete crushed and reinforcement is exposed - concrete spalled beyond the reinforcement which may be sign of rupture  - beam top portion looks safe because of the flange advantage from slab - the cracks develop from bottom to top means rebar yielding occur in support bottom…

 note : i have uploaded some images of calculation and equation by writing on paper. beacause i couldnt type on the keyboard.     Question 1: Compute lateral stiffness of the one story frame with an intermediate realistic stiffness of the beam. The system has 3 DOFs as shown. Assume L = 2h and Elb =…

Question 1: A five storey structure with 5 translational DOF is shown here. Each storey has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived. The fundamental period of vibration (T1 = 2 seconds) and…

Question 1: Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility. ANS- symmetry : - along x-direction - if we split the plan vertically…

Question 1:The building shown, 20 × 35 m in plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness) in three alternative arrangements, (a), (b), (c), all with the same total cross-sectional area of the shear walls. Compare the three alternatives, taking into account…

AIM:  Modelling of 25 storey building with the specified properties using ETABS   INTRODUCTION :   objective of the challenge to know modelling of high rise building in ETABS software and to verify the seismic code requirements from ETABS analysis.   PROCEDURE :  STEP-1 - open ETABS software…

AIM : to model and analyze multiple buildings using ETABS software and compare the results of different storey buildings for seismic forces.     INTRODUCTION : objective of the project is to know how to extract different seismic responses for a structure, how to easily alter certain properties in an ETABS…

AIM : The objective of the project is to analyse the given project and to extract the detailing drawing for the mentioned beams in 2 grid lines in vertical and horizontal.   Introduction : Detailing rule of any Reinforced concrete member :- 1. Minimum reinforcement for shrinkage and temperature 2. Reinforcement required…

AIM : The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment Resisting Frame. The following challenge deals specifically with two columns at the following grid intersections. 3A 3B Provide details of longitudinal reinforcement for the two columns, from foundation to terrace level. Sketch…

The etabs file for a G+6 building is provided. Run the analysis and design the RCC shear walls (show in the etabs model). The following challenge deals specifically with the shear wall of size 300x1500 at grid A-11 in the structural model. Extract values of longitudinal steel ratio, boundary element length and shear reinforcing…

AIM:- To model and analyze the G+7 residential building from the given architectural drawings using ETABS 2018.   INTRODUCTION:- ETABS is an engineering software product that caters to multi-story building analysis and design.Modeling tools and templates,code-base load prescriptions ,analysis methods and solution…

Q.Design a square footing for a column size of 400x400. The compression axial load for the load combination of (1.5 DL + 1.5 LL) is 2000 KN. The safe soil bearing capacity is 150 KN/m2 at a depth of 2 metres below E.G.L. Participants are free to go for either a tapered or stepped footing. Besides the total axial load,…

1. AIM : Model the isolated footing provided in week 11 challenge on SAFE. Analyze and design it to verify the size, depth and steel provided as per calculations. square footing for column size of 400x400 compression axial load for the load combination of (1.5DL + 1.5LL) is 2000KN the safe soil bearing capacity is 150kn/m.sq…

 AIM : Design & Analysis of a Hostel building at Guwahati, Assam.   INTRODUCTION: In this project, participants will get to experience the entire design process from modelling, analysis, design, and preparation of construction drawings. The architectural drawings of a G+3 RCC building is provided.  …