GATE 2027 Civil syllabus: what changed, and what was actually asked
The GATE 2027 CE syllabus is revised: eight sections instead of seven, 20 new lines, 12 expanded ones and 7 dropped compared with GATE 2026. Below is every syllabus line in IIT Madras's wording, marked where it changed, with how many questions the 10 GATE CE papers from 2022 to 2026 asked on it and links to the solved questions. 121 of the 158 lines were the point of at least one question; 14 of the new lines never were.
Source: CE_GATE2027_Syllabus.pdf, GA_GATE2027_Syllabus.pdf (IIT Madras) and CE_2026_Syllabus.pdf (IIT Guwahati) · 630 questions from GATE CE 2022 to 2026 · Updated 17 Nov 2026
What changed in the GATE 2027 Civil syllabus?
IIT Madras revised the CE syllabus for GATE 2027. Construction Materials and Management moved out of Structural Engineering into a new Section 8, so there are now eight sections instead of seven. Across the syllabus 20 lines are new and 12 are expanded; the biggest additions are transportation planning (the four-step travel demand model), ground improvement, sheet piles, river training and earthen dams, landfill design, GNSS and geodetic surveying, cartography, cement chemistry and admixtures, quantity estimation, construction equipment and contracts. 7 lines were dropped, among them prestressed concrete, plate girders, dynamic pile formulae, curve setting, remote sensing and GIS, and SDOF vibration: 8 questions in the 10 CE papers from 2022 to 2026 (14 marks) were on those.
| Syllabus line in 2027 | Subject | Change | Asked 2022-26 |
|---|---|---|---|
| Probability axioms, theorems and independence | Probability and Statistics | New | 5 Q |
| Random variables: PMF, PDF and CDF2026: “Random Variables – Discrete and Continuous” | Probability and Statistics | 3 Q | |
| Virtual work and Castigliano's second theorem2026: “force/ energy methods” | Structural Analysis | 2 Q | |
| Deflections of determinate beams, frames and trusses2026: “Statically determinate and indeterminate structures by force/ energy methods” | Structural Analysis | 3 Q | |
| Influence lines and moving loads2026: “Influence lines” | Structural Analysis | 5 Q | |
| Design and detailing of beams, slabs, columns and footings2026: “Design of beams, slabs, columns” | Concrete Structures | 16 Q | |
| Sheet piles | Foundation Engineering | New | none |
| Ground improvement techniques | Foundation Engineering | New | none |
| Mobile channels, unsteady and rapidly varied flow | Hydraulics | New | 1 Q |
| Flow past sharp-crested weirs | Hydraulics | New | none |
| Streamflow measurements | Hydrology | New | 1 Q |
| River training structures | Irrigation | New | none |
| Earthen dams and seepage through dams | Irrigation | New | none |
| Well irrigation | Irrigation | New | 1 Q |
| Primary, secondary and tertiary treatment2026: “primary and secondary treatment” | Water and Wastewater | 8 Q | |
| Sludge treatment and disposal2026: “Sludge disposal” | Water and Wastewater | 4 Q | |
| Landfill design and operation | Municipal Solid Wastes | New | none |
| Road classification and design vehicle | Transportation Infrastructure | New | none |
| Intersections and interchanges2026: “Types of intersections” | Traffic Engineering | none | |
| Highway capacity and level of service2026: “Highway capacity.” | Traffic Engineering | 2 Q | |
| Four-step travel demand model | Transportation Planning | New | none |
| Plane, geodetic and GNSS surveying | Surveying and Photogrammetry | New | none |
| Topographic, cadastral and engineering surveys | Surveying and Photogrammetry | New | none |
| Cartography and map projections | Surveying and Photogrammetry | New | none |
| Photogrammetry: photo scale and flying height2026: “Photogrammetry and Remote Sensing - Scale, flying height” | Surveying and Photogrammetry | 3 Q | |
| Parallax, space resection and camera calibration | Surveying and Photogrammetry | New | none |
| Cement: composition, hydration and admixtures | Construction Materials | New | 3 Q |
| Estimation and costing2026: “Cost estimation” | Construction Management | 1 Q | |
| PERT and CPM (AOA and AON networks)2026: “Project planning and network analysis - PERT and CPM” | Construction Management | 6 Q | |
| Project updating and monitoring | Construction Management | New | 1 Q |
| Construction equipment | Construction Management | New | none |
| Types of contracts | Construction Management | New | none |
Compared word by word against the GATE 2026 CE PDF. Small rewordings that change nothing (for example "surface run-off models" to "surface runoff models") are not listed; reworded lines are marked on the item below.
Which topics were removed from the GATE CE syllabus for 2027?
7 lines of the 2026 syllabus are not in the 2027 PDF. 8 questions in the 10 papers from 2022 to 2026 (14 marks, about 1.4 a paper) were mainly on them, most of all prestressed concrete (4), SDOF vibration (2) and remote sensing and GIS (2). Past questions on these topics are still worth reading for the method, but they are no longer a reason to study the topic.
| Dropped 2026 line | Subject | Questions 2022-26 | What it means |
|---|---|---|---|
| “Free Vibrations of undamped SDOF system” | Engineering Mechanics | 2 Q, 4 marks | Vibration is gone from the CE syllabus. E.g. 2024 CE2 Q.37. |
| “Sampling theorems” | Probability and Statistics | none | Replaced by basic probability: axioms, theorems and statistical independence. |
| “Prestressed concrete beams” | Concrete Structures | 4 Q, 8 marks | Prestressed concrete is no longer in the CE syllabus. E.g. 2026 CE2 Q.48. |
| “plate girders and trusses” | Steel Structures | none | Plate girders and steel trusses are no longer named under steel design. |
| “dynamic and static formulae” | Foundation Engineering | none | Dynamic pile formulae (Engineering News, Hiley) are no longer listed; static formulae stay. |
| “Horizontal and vertical curves” | Surveying and Photogrammetry | none | Curve setting left Geomatics; highway curves stay under Transportation's horizontal and vertical alignments. |
| “Basics of remote sensing and GIS” | Surveying and Photogrammetry | 2 Q, 2 marks | Remote sensing and GIS are gone; photogrammetry is expanded instead. E.g. 2023 CE1 Q.23. |
Which new GATE 2027 CE topics have no previous-year questions?
14 new lines have no GATE CE question from 2022 to 2026. With no papers to practise from, read the standard textbook chapter or IS/IRC code clause for each, and expect one- and two-mark conceptual questions first.
- Sheet piles (Foundation Engineering)
- Ground improvement techniques (Foundation Engineering)
- Flow past sharp-crested weirs (Hydraulics)
- River training structures (Irrigation)
- Earthen dams and seepage through dams (Irrigation)
- Landfill design and operation (Municipal Solid Wastes)
- Road classification and design vehicle (Transportation Infrastructure)
- Four-step travel demand model (Transportation Planning)
- Plane, geodetic and GNSS surveying (Surveying and Photogrammetry)
- Topographic, cadastral and engineering surveys (Surveying and Photogrammetry)
- Cartography and map projections (Surveying and Photogrammetry)
- Parallax, space resection and camera calibration (Surveying and Photogrammetry)
- Construction equipment (Construction Management)
- Types of contracts (Construction Management)
The other 6 new lines are new in the wording only. Earlier papers already asked them under broader 2026 lines, so their past questions are a fair guide:
- Probability axioms, theorems and independence: 5 questions (2022 CE2, 2023 CE1, 2023 CE2, 2024 CE1, 2025 CE2)
- Mobile channels, unsteady and rapidly varied flow: 1 question (2024 CE1)
- Streamflow measurements: 1 question (2023 CE2)
- Well irrigation: 1 question (2022 CE2)
- Cement: composition, hydration and admixtures: 3 questions (2022 CE1, 2022 CE2, 2025 CE2)
- Project updating and monitoring: 1 question (2024 CE2)
Which GATE CE syllabus topics are asked the most?
Across the 10 GATE CE papers from 2022 to 2026 (CE1 and CE2 every year), the syllabus items with the most marks were specific energy, critical flow, jump, uniform and gradually varied flow (39 marks, 22 questions), water quality parameters and standards (27 marks, 15 questions), distance, angles and levelling (25 marks, 18 questions), design and detailing of beams, slabs, columns and footings (24 marks, 16 questions) and traffic flow parameters and fundamental relationships (22 marks, 12 questions). Asked in every one of the 10 papers: specific energy, critical flow, jump, uniform and gradually varied flow and design and detailing of beams, slabs, columns and footings.
| Syllabus item | Subject | Questions | Marks | Papers |
|---|---|---|---|---|
| Specific energy, critical flow, jump, uniform and gradually varied flow | Hydraulics | 22 | 39 | 10 of 10 |
| Water quality parameters and standards | Water and Wastewater | 15 | 27 | 7 of 10 |
| Distance, angles and levelling | Surveying and Photogrammetry | 18 | 25 | 9 of 10 |
| Design and detailing of beams, slabs, columns and footings | Concrete Structures | 16 | 24 | 10 of 10 |
| Traffic flow parameters and fundamental relationships | Traffic Engineering | 12 | 22 | 9 of 10 |
| Horizontal and vertical alignment | Transportation Infrastructure | 13 | 18 | 9 of 10 |
| Pile capacity, load tests and group efficiency | Foundation Engineering | 10 | 17 | 9 of 10 |
| Eigenvalues and eigenvectors | Linear Algebra | 12 | 16 | 9 of 10 |
| Indeterminate structures: consistent deformations, slope-deflection, moment distribution | Structural Analysis | 10 | 15 | 7 of 10 |
| Precipitation, evaporation and infiltration | Hydrology | 9 | 15 | 6 of 10 |
Counted by Skill-Lync: each question of the 10 GATE CE papers (2022 CE1, 2022 CE2, 2023 CE1, 2023 CE2, 2024 CE1, 2024 CE2, 2025 CE1, 2025 CE2, 2026 CE1, 2026 CE2) filed under the one 2027 syllabus item it mainly tests; marks from the official answer keys.
Which GATE CE syllabus topics were not asked from 2022 to 2026?
23 of the items that were already in the syllabus before 2027 were not the point of any question in the 10 papers, for example partial and total derivatives, line, surface and volume integrals, initial and boundary value problems, separation of variables, centre of mass and determinate arches and cables. The full list is below. Give them less time, not none: with a revised syllabus the 2027 paper setters may well test what is new or rarely asked.
- Calculus: partial and total derivatives, line, surface and volume integrals
- Ordinary Differential Equations: initial and boundary value problems
- Partial Differential Equations: separation of variables
- Engineering Mechanics: centre of mass
- Structural Analysis: determinate arches and cables
- Concrete Structures: bond and development length
- Steel Structures: working stress and limit state concepts
- Hydraulics: forces on immersed bodies, flow measurement in channels and pipes
- Hydrology: reservoir capacity
- Irrigation: irrigation systems and methods, gravity dams and spillways
- Water and Wastewater: water quality index, water requirement, water distribution system, effluent discharge standards, reuse of treated sewage
- Transportation Infrastructure: cross-sectional elements (IRC)
- Traffic Engineering: traffic signs, intersections and interchanges
- Surveying and Photogrammetry: total station
- Construction Management: types of construction projects
4 questions tested something neither syllabus names: 2024 CE1 Q.17 (Formwork stripping sequence is not named in the 2027 syllabus); 2024 CE1 Q.51 (Equipment depreciation (engineering economics) is not named in the syllabus); 2024 CE2 Q.17 (Pure project and matrix organisation structures are not named in the syllabus); 2024 CE2 Q.47 (Engineering economics (interest rates) is not named in the syllabus); they count in the subject totals on the weightage page but not under any item here.
Linear Algebra
22 questions and 29 marks in GATE CE 2022 to 2026. 3 of its 3 syllabus items were asked. Solved questions: Linear algebra.
Official syllabus text
Linear Algebra: Matrix algebra; Systems of linear equations; eigenvalues and eigenvectors.
Linear Algebra: Matrix algebra
- 2026 CE1 Q.27 What is the magnitude of l22 in the Cholesky decomposition of the 2x2 matrix with rows (9, 15) and (15, 50)?
- 2025 CE2 Q.11 Transpose of the 3 by 3 matrix with rows (2, 3, 4), (1, 4, 5) and (4, 3, 2)
- 2024 CE2 Q.12 Are (A + B)^T = A^T + B^T and (AB)^T = A^T B^T true for matrices conformable for addition and multiplication?
- 2024 CE2 Q.48 What is the determinant of AB for A = [2 1 4; 1 0 3] and B = [-1 0; 2 3; 1 4]?
- and 2 more (2023 CE2, 2022 CE2)
Systems of linear equations
- 2026 CE1 Q.12 Does the homogeneous system of two equations in three unknowns represent a plane, line, volume or point?
- 2026 CE1 Q.28 If integers x and y make (x + y - 7)^2 + (y + 3x - 13)^2 = 0, what is x^3 + y^3?
- 2025 CE1 Q.12 For the 3 by 2 matrix A with rows (1, 1), (1, 3), (-2, -3), when is Ax = b solvable?
- 2023 CE2 Q.37 Two vectors lie in the null space of a rank-2 4x4 matrix: which other vector must also lie in it?
eigenvalues and eigenvectors.
- 2026 CE2 Q.11 A matrix has eigenvalues 1, 2 and 3: what is the trace of its square?
- 2026 CE2 Q.31 Given the three eigenvalues of a 3x3 matrix A, what is the absolute value of its determinant?
- 2026 CE1 Q.11 For the symmetric 3x3 matrix P with rows (1 0 1), (0 1 0), (1 0 1), which statement is true?
- 2025 CE2 Q.45 Eigenvalues of the 2 by 2 matrix with rows (6, 8) and (4, 2)
- and 8 more (2025 CE1, 2024 CE1, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Calculus
16 questions and 27 marks in GATE CE 2022 to 2026. 5 of its 7 syllabus items were asked. Solved questions: Calculus and vector calculus.
Official syllabus text
Calculus: Functions of single variable; Limit, continuity and differentiability; Mean value theorems, local maxima and minima; Taylor series; Evaluation of definite and indefinite integrals, application of definite integral to obtain area and volume; Partial derivatives; Total derivative; Gradient, Divergence and Curl, Vector identities; Directional derivatives; Line, Surface and Volume integrals.
Calculus: Functions of single variable; Limit, continuity and differentiability
- 2026 CE2 Q.36 For f(x) defined as a 3x3 determinant with constant p, what is the third derivative of f at x = 0?
- 2025 CE1 Q.36 What is the limit of x minus the square root of (x squared plus x) as x tends to infinity?
- 2023 CE1 Q.48 Is e^x times |sin x| continuous, differentiable, periodic or bounded?
- 2022 CE1 Q.45 Is f(x) = max{3 - x, x - 1} continuous, differentiable, and does it have a local minimum or maximum at x = 2?
Mean value theorems, local maxima and minima
- 2025 CE2 Q.44 Local maximum and local minimum of f(x) = x^3 - (15/2)x^2 + 18x + 20
- 2025 CE1 Q.48 Maximum value of h(x) = -x^3 + 2x^2 on the interval [-1, 1.5]
- 2024 CE2 Q.14 Does f(x) = x^3 - 27x + 4 for x from 1 to 6 have a maxima, minima, saddle or inflection point?
- 2022 CE2 Q.36 On 1 to 3, where are the zeros, local maximum and minimum of x cubed - 6x squared + 11x - 6, and is f'' positive?
Taylor series
Evaluation of definite and indefinite integrals, application of definite integral to obtain area and volume
Partial derivatives; Total derivative
Gradient, Divergence and Curl, Vector identities; Directional derivatives
- 2026 CE2 Q.37 What is the curl of V = 3x^2yz i - 5xy j + 6yz^2 k at the point (2, -1, 1)?
- 2024 CE2 Q.44 For p = i + j + k, q = i + 2j + 3k and r = 2i + 3j + 4k, which vector triple-product statements hold?
- 2024 CE1 Q.37 For the given vector field p and scalar field r, is curl(grad r) null and is div(curl p) zero?
- 2023 CE2 Q.11 Which identity gives the divergence of a scalar field times a vector field, div(phi u)?
Line, Surface and Volume integrals.
Ordinary Differential Equations
10 questions and 16 marks in GATE CE 2022 to 2026. 3 of its 4 syllabus items were asked. Solved questions: Differential equations.
Official syllabus text
Ordinary Differential Equation (ODE): First order (linear and non-linear) equations; higher order linear equations with constant coefficients; Euler-Cauchy equations; initial and boundary value problems.
First order (linear and non-linear) equations
- 2026 CE2 Q.46 For dy/dx + xy = x with y(0) = 0, what is the value of y at x = 1?
- 2025 CE2 Q.29 Order of the ODE with a third derivative plus the sixth power of the second derivative and the fourth power of dy/dx
- 2025 CE2 Q.36 General solution of the differential equation dy/dx = e^(x - y)
- 2024 CE2 Q.15 Is dy/dx = (x^4 + 3x^2y^2 + 2y^4)/(x^3 y) homogeneous, and is dy/dx = -y^2/x^2 an exact ODE?
- and 3 more (2024 CE1, 2023 CE1, 2022 CE1)
higher order linear equations with constant coefficients
Euler-Cauchy equations
initial and boundary value problems.
Partial Differential Equations
14 questions and 16 marks in GATE CE 2022 to 2026. 3 of its 4 syllabus items were asked. Solved questions: Calculus and vector calculus, Differential equations.
Official syllabus text
Partial Differential Equation (PDE): Fourier series; Separation of variables; solutions of one-dimensional diffusion equation; first and second order one-dimensional wave equation and two-dimensional Laplace equation.
Partial Differential Equation (PDE): Fourier series
- 2026 CE2 Q.13 Which Fourier series represents the square wave equal to -1 on (-pi, 0) and 1 on (0, pi)?
- 2025 CE1 Q.13 Fourier series of a period-4 function equal to 2k on (-1, 1) and 0 elsewhere in the period
- 2023 CE1 Q.25 In the Fourier series of p x^4 + q x^5 on [-L, L], which coefficients depend on p and which on q?
- 2022 CE1 Q.30 In the Fourier cosine series of cos to the power 4 of x, what is f4 + f5?
Separation of variables
solutions of one-dimensional diffusion equation
first and second order one-dimensional wave equation and two-dimensional Laplace equation.
- 2026 CE2 Q.30 Which functions are possible solutions of the partial differential equation u_xx - u_yy = 0?
- 2025 CE1 Q.28 Which of these equations are second-order, linear, homogeneous partial differential equations?
- 2024 CE2 Q.11 Laplace's equation on a 2 m square with three edges at T = 50 and one at T = 100: what is T at the centre?
- 2024 CE1 Q.12 What is the general solution of the second-order PDE d2u/dx2 = 2 for an unknown function u(x, y)?
- and 4 more (2024 CE1, 2023 CE2, 2022 CE2, 2022 CE1)
Probability and Statistics
15 questions and 23 marks in GATE CE 2022 to 2026. 6 of its 6 syllabus items were asked. Solved questions: Probability and statistics, Highways, pavements, traffic and railways.
Official syllabus text
Probability and Statistics: Basic concepts of probability – axioms and theorems, statistical independence; Conditional probability; Descriptive statistics – Mean, median, mode and standard deviation; Random Variables – Probability mass function, probability density function, cumulative distribution function; Poisson and Normal Distribution; Linear regression.
Basic concepts of probability – axioms and theorems, statistical independence
Replaces the 2026 line "Sampling theorems".
- 2025 CE2 Q.22 Mutually exclusive, independent and conditional probability: which statements about non-null A and B are correct?
- 2024 CE1 Q.13 Passing only Maths has probability 1/3, only English 4/9, both 1/6: what is P(passing at least one)?
- 2023 CE2 Q.13 Of 100 vehicles picked at random on an even date, how many are expected to lack a pollution clearance certificate?
- 2023 CE1 Q.29 Two independent events have probabilities 0.5 and 0.8. What is the probability that at least one occurs?
- and 1 more (2022 CE2)
Conditional probability
Descriptive statistics – Mean, median, mode and standard deviation
Random Variables – Probability mass function, probability density function, cumulative distribution function
- 2025 CE2 Q.51 Standard deviation of a random variable taking 1, 2, 4 and 8 with probabilities 0.3, 0.1, 0.3 and 0.3
- 2025 CE1 Q.14 Variance of a random variable taking 0, 1, 7, 11 and 12 with probabilities 0.4, 0.3, 0.1, 0.1 and 0.1
- 2025 CE1 Q.63 30 % trucks at 30-60 km/h and 70 % cars at 40-80 km/h, uniform: share above a 50 km/h limit
Poisson and Normal Distribution
- 2026 CE2 Q.47 Age is N(36, 12) and height N(160, 10): find h so that P(height above h) equals P(age above 50)
- 2024 CE1 Q.47 With a 200-year return period and Poisson occurrence, what is the chance of at least one exceedance in 50 years?
- 2022 CE1 Q.63 Cars at 4 per hour and buses at 2 per hour arrive as Poisson processes: probability of at least 2 vehicles in 30 minutes
Linear regression.
Numerical Methods
12 questions and 18 marks in GATE CE 2022 to 2026. 6 of its 6 syllabus items were asked. Solved questions: Calculus and vector calculus, Numerical methods.
Official syllabus text
Numerical Methods: Error analysis. Numerical solutions of linear and nonlinear algebraic equations; Newton's and Lagrange polynomials; numerical differentiation; Integration by trapezoidal and Simpson's rule; Single and multi-step methods for firstorder differential equations.
Numerical Methods: Error analysis.
Numerical solutions of linear and nonlinear algebraic equations
- 2026 CE1 Q.48 Starting from x = 0.5, what is the Newton-Raphson second approximation to the root of e^-x - x?
- 2024 CE1 Q.11 In which range does the smallest positive root of x^5 - 5x^4 - 10x^3 + 50x^2 + 9x - 45 = 0 lie?
- 2022 CE1 Q.29 What is x5 of the iteration x(n+1) = (x(n) + P/x(n))/2 for P = 10 starting from x1 = 1?
Newton's and Lagrange polynomials
numerical differentiation
Integration by trapezoidal and Simpson's rule
Single and multi-step methods for firstorder differential equations.
- 2025 CE1 Q.49 Euler method with h = 0.5 for dy/dx = y + 2x - x^2, y(0) = 1: value of y at x = 1
- 2023 CE1 Q.52 One backward-difference step of du/dt + 2tu^2 = 1 from u = 1.75 at t = 3.14 s: what is u_n - u_(n-1)?
- 2022 CE1 Q.48 Using Euler's method with step 0.2, what is y at x = 1.4 for dy/dx = 4(x + 2) - y with y(1) = 3?
Engineering Mechanics
13 questions and 25 marks in GATE CE 2022 to 2026. 3 of its 4 syllabus items were asked. Solved questions: Engineering mechanics and solid mechanics, Structural analysis.
Official syllabus text
Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations; Internal forces in structures; Frictions and its applications; Centre of mass.
Engineering Mechanics: System of forces, free-body diagrams, equilibrium equations
- 2024 CE2 Q.16 Rigid beam on two springs, 3 kN load 1 m from P: what spring stiffness at Q keeps the beam from rotating?
- 2024 CE1 Q.49 Reaction at pin L of a 13-joint, 22-member plane truss with pins at A and L and a roller at K
- 2023 CE2 Q.53 Vertical reaction at the hinge of a 6 m beam with a 500 N inclined load and an eccentric 100 N horizontal load
- 2023 CE2 Q.57 Horizontal force at pin P between the arm PQ and post RS of a bracket frame with an inclined strut TU
Internal forces in structures
Member forces in determinate trusses are filed here: the 2027 Structural Analysis line no longer names truss analysis.
- 2026 CE2 Q.39 Two-storey plane truss hinged at E and F, 40 kN horizontal at G and 20 kN at R: force in member JF
- 2026 CE1 Q.39 Maximum bending moment in a portal frame on a hinge and a roller with 50 kN lateral and 90 kN beam loads
- 2025 CE2 Q.46 Zero-force members of a truss with a loaded overhanging arm on a two-column tower
- 2023 CE1 Q.54 Idealised six-panel bridge truss with 20 kN at each top joint: force in the diagonal U2L3
- and 2 more (2022 CE1)
Frictions and its applications
- 2026 CE1 Q.50 Two blocks joined by a rigid rod against a wall and a floor: friction coefficient when slip impends at 45 degrees
- 2022 CE2 Q.52 Uniform rod against a frictionless wall on a rough floor (height 4 m, base 3 m): minimum coefficient of friction
- 2022 CE1 Q.46 Does a 1 m by 2 m block of 25 kN slide or overturn under a horizontal push at its top, with friction 0.3?
Centre of mass.
Solid Mechanics
27 questions and 42 marks in GATE CE 2022 to 2026. 7 of its 7 syllabus items were asked. Solved questions: Engineering mechanics and solid mechanics.
Official syllabus text
Solid Mechanics: Bending moment and shear force in statically determinate beams; Transformation of stress (Mohr's circle); Simple stress and strain relationships; Simple bending theory, flexural and shear stresses, shear centre; Uniform torsion; Combined stresses; Column buckling.
Solid Mechanics: Bending moment and shear force in statically determinate beams
- 2026 CE2 Q.18 Beam fixed at F and L with internal hinges at G and J: upward vertical reaction at L
- 2025 CE1 Q.41 Beam with an internal hinge and a couple applied through a post at D: which SFD and BMD statements are correct?
- 2024 CE1 Q.39 Support reactions of a three-support beam with an internal hinge and a UDL between supports A and B
- 2023 CE1 Q.49 Simply supported beam with equal and opposite couples M at the third points: reactions, shear, moment, deflection
Transformation of stress (Mohr's circle)
Reworded in 2027 (2026: “Transformation of stress”). Now names Mohr's circle and sits second in the list.
- 2026 CE2 Q.17 Which of four stress elements, each with 40 units on its faces, represents a state of pure shear?
- 2025 CE2 Q.39 Maximum compressive stress for the difference of two uniaxial stress states at 0 and 45 degrees
- 2024 CE1 Q.14 Maximum shear stress at a point whose 3D stress tensor is diagonal: 10, 40 and 0 MPa
- 2024 CE1 Q.38 Match uniaxial tension, pure shear, uniaxial compression and biaxial compression to their Mohr's circles
- and 2 more (2023 CE2, 2023 CE1)
Simple stress and strain relationships
- 2026 CE2 Q.16 Which condition must a plane strain problem in the X-Y plane satisfy?
- 2026 CE2 Q.50 Bars BCD and FG fixed at B and G with a 2 mm gap at D-F: reaction at B for 20 kN at C
- 2026 CE1 Q.51 Force in a spring when a 3 m rod joined to it between fixed supports is heated by 100 C
- 2025 CE1 Q.51 Rigid bar ABC on pin-jointed links BD and CE: CE stretches 5 mm, find the downward deflection of end A
- and 4 more (2023 CE2, 2023 CE1, 2022 CE2)
Simple bending theory, flexural and shear stresses, shear centre
- 2026 CE1 Q.14 Where is the shear centre of a thin angle section? Pick the figure with the dot in the right place
- 2024 CE2 Q.18 Where is the shear centre of an I-section whose flanges project 6 cm on one side of the web and 3 cm on the other?
- 2023 CE1 Q.55 Moment of inertia of a T-shaped girder section (40 x 10 cm flange, 20 x 50 cm web) about its centroidal axis
- 2022 CE1 Q.16 Where is the shear centre of a thin-walled T-section with an unequal flange?
Uniform torsion
Combined stresses
Reworded in 2027 (2026: “combined and direct bending stresses”).
Column buckling.
Reworded in 2027 (2026: “buckling of column”).
Structural Analysis
22 questions and 36 marks in GATE CE 2022 to 2026. 6 of its 7 syllabus items were asked. Solved questions: Structural analysis.
Official syllabus text
Structural Analysis: Principle of superposition; Work and energy methods: Principle of virtual work, Castigliano's second theorem; Deflections of statically determinate beams, frames, and trusses; Analysis of statically indeterminate structures by force and displacement methods (method of consistent deformations, slope-deflection method, moment distribution method); Influence lines and moving loads; Stiffness matrix method; Analysis of determinate arches and cables.
Structural Analysis: Principle of superposition
Reworded in 2027 (2026: “Method of superposition”).
Work and energy methods: Principle of virtual work, Castigliano's second theorem
Deflections of statically determinate beams, frames, and trusses
- 2025 CE1 Q.50 Stepped simply supported beam (2EI then EI) with a couple M0 at A: second derivative of deflection at mid-AC
- 2024 CE2 Q.49 Deflection at Q of a 6 m cantilever whose outer half QR is rigid and carries 5 kN/m
- 2022 CE2 Q.51 Two cantilevers joined by a vertical spring: load at the centre of the lower beam that makes the spring force zero
Analysis of statically indeterminate structures by force and displacement methods (method of consistent deformations, slope-deflection method, moment distribution method)
Reworded in 2027 (2026: “Displacement methods: Slope deflection and moment distribution methods”).
- 2025 CE2 Q.38 Reaction at the prop of a propped cantilever loaded by an end moment M when the prop settles by delta
- 2025 CE2 Q.52 Force in the centre rod when a flexible steel beam hung from three steel rods carries a UDL
- 2025 CE1 Q.29 Three-column portal frame with 100 kN.m couples at B and G: which statements about member CD and joint C hold?
- 2025 CE1 Q.37 Distribution factor of the stepped member AD (2EI then EI) at joint A of a rigid-jointed frame
- and 6 more (2024 CE1, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Influence lines and moving loads
- 2026 CE2 Q.38 Influence line of the end rotation at support B of a simply supported beam of span L
- 2025 CE2 Q.14 Influence line for the force in bottom-chord member G-I of a six-panel truss with mid-height joints
- 2024 CE2 Q.50 Maximum fixing moment at P of a beam fixed at P, hinged at Q and pinned at R under a moving 10 kN load
- 2023 CE2 Q.17 What the Muller-Breslau principle is used for in the analysis of structures
- and 1 more (2022 CE1)
Stiffness matrix method
Reworded in 2027 (2026: “Stiffness and flexibility methods of structural analysis”).
Analysis of determinate arches and cables.
Reworded in 2027 (2026: “Analysis of trusses, arches, beams, cables and frames”).
Concrete Structures
21 questions and 30 marks in GATE CE 2022 to 2026. 2 of its 3 syllabus items were asked. Solved questions: Concrete structures.
Official syllabus text
Concrete Structures: Working stress and limit state design concepts; Design and detailing of beams, slabs, columns, and isolated footings; Bond and development length.
Concrete Structures: Working stress and limit state design concepts
- 2025 CE1 Q.52 RC beam 300 x 700, 2000 mm2 steel, m = 12, top fibre strain 0.0004: what is the stress in the steel?
- 2024 CE2 Q.21 Which structural design method does not apply safety factors to the design loads?
- 2023 CE2 Q.15 What does M20 concrete mean as per IS 456: average or 5-percentile, cube or cylinder strength?
- 2023 CE1 Q.14 Strains in concrete and steel of a balanced M20/Fe415 beam section at ultimate state as per IS 456
- and 1 more (2022 CE1)
Design and detailing of beams, slabs, columns, and isolated footings
- 2026 CE2 Q.14 Fe500/M25 beam with neutral axis at 302 mm and xu,max/d = 0.456: what is the most probable mode of failure?
- 2026 CE2 Q.51 Limit state of collapse design moment: 250 × 600 mm beam, 6.23 m span, 5 kN/m live + 5 kN/m dead load
- 2026 CE1 Q.29 Slab bars changed from 10 mm at 150 mm c/c to 12 mm bars: what spacing resists the same design moment?
- 2025 CE2 Q.30 RC beam 250 x 500, design shear strength 0.3 MPa: what pure torsion can it resist as per IS 456?
- and 12 more (2025 CE2, 2025 CE1, 2024 CE2, 2024 CE1, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Bond and development length.
Steel Structures
13 questions and 22 marks in GATE CE 2022 to 2026. 3 of its 4 syllabus items were asked. Solved questions: Steel structures.
Official syllabus text
Steel Structures: Working stress and limit state design concepts; Design of tension and compression members, beams and beam-columns, column bases; Connections – simple and eccentric, beam-column connections; Concept of plastic analysis – beams and portal frames.
Steel Structures: Working stress and limit state design concepts
Design of tension and compression members, beams and beam-columns, column bases
Connections – simple and eccentric, beam-column connections
- 2026 CE1 Q.30 Fillet weld size changed from 5 mm to 6 mm: what weld length transfers the same design load?
- 2025 CE2 Q.37 250 mm tube welded all round with a 5 mm fillet weld, Fe410 shop weld: what torque can the weld resist?
- 2025 CE1 Q.54 Batten plate bolted with 6 bolts, longitudinal shear 70 kN and moment 10 kN.m: what bolt value is needed?
- 2023 CE2 Q.40 Minimum length of each side fillet weld to carry 275 kN in a lap joint as per IS 800 limit state
- and 2 more (2023 CE1, 2022 CE1)
Concept of plastic analysis – beams and portal frames.
Reworded in 2027 (2026: “Concept of plastic analysis - beams and frames”).
- 2026 CE2 Q.49 Portal frame with fixed and roller supports: combined plastic mechanism Mp = C1·PL + C2·wL², find C1/C2
- 2026 CE1 Q.52 Plastic section modulus of a steel T-section with a 100 × 20 mm flange and a 20 × 100 mm web
- 2025 CE1 Q.53 T-section 60 x 5 flange, 5 x 60 web, elastic NA at 18.75 mm, plastic NA at 5 mm: what is the shape factor?
- 2024 CE2 Q.33 Shape factor of a 150 x 120 x 30 mm steel angle with elastic section modulus 150.92 cm3
- and 2 more (2023 CE1, 2022 CE2)
Soil Mechanics
45 questions and 68 marks in GATE CE 2022 to 2026. 10 of its 10 syllabus items were asked. Solved questions: Soil mechanics.
The 2027 PDF prints Geotechnical Engineering as two paragraphs without the 2026 sub-headings; we keep the old names for the two halves.
Official syllabus text
Three-phase system and phase relationships, index properties; Unified and Indian standard soil classification system; Permeability – one dimensional flow, Seepage through soils – two-dimensional flow, flow nets, uplift pressure, piping, capillarity, seepage force; Principle of effective stress and quicksand condition; Compaction of soils; One-dimensional consolidation, time rate of consolidation; Shear Strength, Mohr's circle, effective and total shear strength parameters; Stress-strain characteristics of clays and sand; Stress paths.
Three-phase system and phase relationships, index properties
- 2026 CE2 Q.59 Plastic limit of a soil with natural water content 30 %, plasticity index 40 % and liquidity index 50 %
- 2025 CE2 Q.41 Soil with w = 15%, S = 67%, e = 0.6, G = 2.67: weight of water needed to fully saturate 5 m3 of it
- 2025 CE1 Q.57 Clay with w = 18%, G = 2.74, S = 65% soaks up water to S = 85.2% at constant volume: new moisture content
- 2024 CE2 Q.54 Density index of a sand with 50% voids, maximum and minimum densities 1.8 and 1.3 g/cm3, G = 2.7
- and 4 more (2024 CE1, 2023 CE1, 2022 CE1)
Unified and Indian standard soil classification system
Permeability – one dimensional flow
- 2026 CE1 Q.31 Permeability of a sand at void ratio 0.80 by Taylor's equation, given 0.14 cm/s at void ratio 0.60
- 2025 CE2 Q.15 Which laboratory test is most suitable for measuring the permeability of clayey soils?
- 2025 CE1 Q.59 Two soils in series (50 cm at 0.055 cm/s, 30 cm at 0.035 cm/s), area 100 cm2, head 150 cm: discharge
- 2023 CE2 Q.60 Total head at the junction of two soil samples with k = 10 and 1 mm/s in series under a pressurised tank
- and 2 more (2022 CE1)
Seepage through soils – two-dimensional flow, flow nets, uplift pressure, piping, capillarity, seepage force
- 2025 CE2 Q.31 Flow net under a dam, 9 m head, 10 drops, exit field 1 m, soil 21 kN/m3: factor of safety against quick sand
- 2024 CE2 Q.45 Permeability of flocculated compacted clay, pore pressure on the phreatic line, piping under dams
- 2024 CE2 Q.53 Void ratio of an earth dam soil for FS 2 against piping: 15 m head, 10 drops, 3 m elements
- 2023 CE2 Q.19 Scale factor for the sheet pile embedment depth to draw a flow net in anisotropic soil with kH and kV
Principle of effective stress and quicksand condition
- 2026 CE2 Q.33 Critical hydraulic gradient for quicksand in a saturated sand with water content 20 % and G = 2.65
- 2025 CE2 Q.24 Water table depth, bulking of sand, liquefaction, earth pressure: which effective stress statements are wrong?
- 2022 CE2 Q.41 Sum of vertical effective stresses at three depths in saturated soil under a standing water column
Compaction of soils
One-dimensional consolidation, time rate of consolidation
- 2026 CE2 Q.56 Clay layer takes 30 days to go from 25 % to 50 % consolidation: total time for 90 % consolidation
- 2025 CE2 Q.32 6 m clay drained top and bottom, t50 = 2 years, mv = 1.51e-3 m2/kN: coefficient of permeability in m/year
- 2025 CE1 Q.38 Oedometer clay at 100 kPa, load raised to 150 kPa: effective stress and excess pore pressure right after
- 2024 CE1 Q.53 Clay layer settled 10 mm of 50 mm in 300 days: additional time to reach 50% consolidation
- and 2 more (2022 CE2, 2022 CE1)
Shear Strength, Mohr's circle, effective and total shear strength parameters
- 2025 CE2 Q.47 UCS as a UU test, CD parameters for rapid construction, vane shear, phi in UU tests: which are correct?
- 2025 CE1 Q.17 CD triaxial test on a normally consolidated clay, Mohr circle from 50 to 100 kPa: what is the friction angle?
- 2024 CE2 Q.55 Sand failing when axial stress drops to 100 kPa at 300 kPa cell pressure: failure plane angle
- 2024 CE1 Q.55 Skempton's B from a 10 kPa cell pressure increase that produced 1 kPa pore pressure in a CU test
- and 6 more (2023 CE2, 2023 CE1, 2022 CE2)
Stress-strain characteristics of clays and sand
- 2024 CE2 Q.23 Which saturated fine-grained soil can have a negative Skempton pore pressure coefficient A?
- 2022 CE2 Q.40 Match loose sand volume change and pore pressure in triaxial shear, B for saturated soil and Nq for clay
- 2022 CE1 Q.40 Match normally consolidated soil, quick clay, critical-state sand and high-plasticity clay to their conditions
Stress paths.
Foundation Engineering
43 questions and 71 marks in GATE CE 2022 to 2026. 8 of its 10 syllabus items were asked. Solved questions: Foundation engineering.
Official syllabus text
Sub-surface investigations – Drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests; Earth pressure theories – Rankine and Coulomb; Stability of slopes – Finite and infinite slopes, Bishop's method; Sheet Piles; Stress distribution in soils – Boussinesq's theory; Pressure bulbs; Shallow foundations – Terzaghi's and Meyerhof's bearing capacity theories, effect of water table; Combined footing and raft foundation; Contact pressure; Settlement analysis in sands and clays; Deep foundations – static formulae, axial load capacity of piles in sands and clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction; Ground improvement techniques.
Sub-surface investigations – Drilling bore holes, sampling, plate load test, standard penetration and cone penetration tests
- 2026 CE1 Q.18 Match Menard, Marchetti, Casagrande, Proctor with pressuremeter, dilatometer, liquid limit, compaction tests
- 2026 CE1 Q.32 Inner diameter of a 50.8 mm thin-walled sampling tube for an area ratio of 10 % (undisturbed clay sample)
- 2023 CE2 Q.18 SPT N of 28 recorded with a 50% efficient manual hammer: value with a 70% efficient automatic hammer
- 2022 CE2 Q.31 Inside diameter of a sampler cutting edge for a 50 mm tube and an inside clearance ratio of 1 %
- and 1 more (2022 CE1)
Earth pressure theories – Rankine and Coulomb
- 2026 CE1 Q.46 Rankine theory: FALSE failure-plane inclinations to the major principal plane in active and passive states
- 2024 CE2 Q.40 Direction of wall friction when a rough wall moves into the backfill, and how theories treat surcharge
- 2024 CE1 Q.41 Failure-plane inclinations to the major principal plane in Rankine active and passive states, phi = 30
- 2023 CE2 Q.42 Force polygon of the passive failure wedge behind a vertical wall with an inclined c-phi backfill
- and 4 more (2023 CE1, 2022 CE1)
Stability of slopes – Finite and infinite slopes, Bishop's method
- 2026 CE1 Q.56 Critical height of an infinite slope at 22 degrees in a c-phi soil with c' = 12 kPa and phi' = 15 degrees
- 2025 CE2 Q.55 Canal bank in clay, cu = 30 kPa, R = 14 m, 80 degree arc, water-filled 2.5 m tension crack: factor of safety
- 2025 CE1 Q.55 Road cut in silty clay, point A 6.5 m below the GWT, shear stress 60 kPa: long-term factor of safety at A
- 2024 CE1 Q.54 Minimum friction angle for a 30 degree infinite cohesionless slope with seepage parallel to the surface
- and 1 more (2023 CE1)
Sheet Piles
Stress distribution in soils – Boussinesq's theory; Pressure bulbs
- 2026 CE2 Q.58 Minimum exploration depth below a 2000 kN column: Boussinesq stress down to 10 % of effective overburden
- 2023 CE1 Q.41 Boussinesq point load: locus of the depth at which the vertical stress is maximum for a given radial distance
- 2022 CE2 Q.32 Maximum depth of the 10 % pressure bulb by Boussinesq below a 2 m square footing carrying 1000 kN
- 2022 CE1 Q.32 Boussinesq point load of 3000 kN: ratio of vertical stress increase at 1 m and 2 m depth below the load
Shallow foundations – Terzaghi's and Meyerhof's bearing capacity theories, effect of water table
- 2026 CE2 Q.57 Bearing capacity factor Nq from ultimate capacities 532.80 kPa and 864 kPa of a 1 m strip at 1 m and 2 m depth
- 2026 CE1 Q.59 Change in Terzaghi net ultimate bearing capacity of a strip on pure clay when the water table rises to ground
- 2025 CE2 Q.56 1 m circular plate on dry sand (16.66 kN/m3) fails at 1500 kPa: Terzaghi bearing capacity factor N-gamma
- 2025 CE1 Q.56 6 m square footing, 2 m deep and 2 m thick, 2500 kN, clay c = 50 kPa: Terzaghi factor of safety
- and 4 more (2024 CE1, 2023 CE2, 2023 CE1, 2022 CE2)
Combined footing and raft foundation; Contact pressure
Settlement analysis in sands and clays
Deep foundations – static formulae, axial load capacity of piles in sands and clays, pile load test, pile under lateral loading, pile group efficiency, negative skin friction
Reworded in 2027 (2026: “Deep foundations – dynamic and static formulae”). Dynamic pile formulae are no longer listed; static formulae stay.
- 2026 CE2 Q.22 Match Converse-Labarre, Hiley, Newmark's chart and Skempton's equation with their uses in foundation design
- 2026 CE1 Q.57 Capacity ratio of 1200 mm to 600 mm diameter, 6 m long piles in clay with cu = 80 kPa and adhesion factor 0.54
- 2026 CE1 Q.58 Spacing-to-diameter ratio of a 5 x 5 group of 1 m friction piles in soft clay for a group efficiency of unity
- 2025 CE2 Q.57 4 x 4 friction pile group in clay, 20 m long, 500 mm piles, qu = 100 kPa, alpha 0.8: spacing for efficiency 1
- and 6 more (2025 CE1, 2024 CE2, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Ground improvement techniques.
Fluid Mechanics
19 questions and 31 marks in GATE CE 2022 to 2026. 7 of its 7 syllabus items were asked. Solved questions: Fluid mechanics and hydraulics.
Official syllabus text
Fluid Mechanics: Properties of fluids, fluid statics; Continuity, momentum and energy equations and their applications; Potential flow, Laminar and turbulent flow; Flow in pipes, pipe networks; Concept of boundary layer and its growth; Concept of lift and drag.
Fluid Mechanics: Properties of fluids, fluid statics
- 2026 CE2 Q.53 Horizontal hydrostatic force on a 0.5 m wide vertical gate holding 0.5 m of oil over 1.0 m of water
- 2025 CE2 Q.60 6 m wide inclined gate hinged at P, 3 m by 4 m, shaft fails at 3924 kN m: maximum water depth h
- 2024 CE2 Q.24 Shear stress against velocity gradient: identify the real solid, Bingham plastic, Newtonian and ideal fluid
- 2024 CE1 Q.59 Total pressure force on the side of a closed oil-and-water tank connected to an overhead reservoir
- and 2 more (2023 CE2, 2022 CE2)
Continuity, momentum and energy equations and their applications
- 2025 CE1 Q.30 Conditions under which Bernoulli's equation can be applied in a fluid flow
- 2024 CE2 Q.58 Time for the water level in a 2 m x 1.5 m tank to fall from 5 m to 3.5 m through a 100 mm orifice
- 2023 CE1 Q.44 Efficiency of a 20 m/s water jet striking a series of radial plates on a wheel moving at 15 m/s
Potential flow
Laminar and turbulent flow
Flow in pipes, pipe networks
- 2026 CE2 Q.54 Operating head of a pump with H = 140 - 9000 Q2 lifting 35 m through a 2 km, 250 mm pipe (f = 0.04)
- 2026 CE1 Q.16 Two long parallel pipes of 600 mm and 400 mm diameter between two reservoirs: ratio of their flow rates
- 2025 CE2 Q.33 Pipes A (2 m, 100 m) and B (1 m, 200 m) in series, f = 0.01: ratio of head loss in B to head loss in A
- 2024 CE2 Q.57 Diameter of a smoother replacement pipeline (f = 0.01 vs 0.04) for the same flow and head loss
- and 1 more (2022 CE1)
Concept of boundary layer and its growth
Concept of lift and drag.
Hydraulics
26 questions and 44 marks in GATE CE 2022 to 2026. 3 of its 6 syllabus items were asked. Solved questions: Fluid mechanics and hydraulics, Hydrology and irrigation.
Official syllabus text
Hydraulics: Forces on immersed bodies; Flow measurement in channels and pipes; Dimensional analysis and hydraulic similitude; Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profiles; Prismatic and mobile channels, steady and unsteady flows, rapidly varied flow and hydraulic jump; Flow past sharp crested weirs.
Hydraulics: Forces on immersed bodies
Flow measurement in channels and pipes
Dimensional analysis and hydraulic similitude
- 2025 CE2 Q.48 Drag on a sphere from viscosity, density, velocity and diameter: which groups are non-dimensional
- 2025 CE1 Q.19 Which combination of velocity, length scale and gravity is dimensionless
- 2022 CE1 Q.19 Match viscosity, gravity, compressibility and pressure with the Reynolds, Froude, Mach and Euler numbers
Channel Hydraulics – Energy-depth relationships, specific energy, critical flow, hydraulic jump, uniform flow, gradually varied flow and water surface profiles
- 2026 CE2 Q.52 Width of a rectangular channel that carries 96 m3/s at a critical depth of 9.8 m
- 2026 CE2 Q.55 Uniform flow in a wide rectangular channel, 10 m3/s at 2.0 m deep: depth when the discharge doubles
- 2026 CE1 Q.23 Match M1, M2 and M3 gradually varied flow profiles with a positive, negative or zero water surface slope
- 2026 CE1 Q.40 Hydraulic jump in a horizontal rectangular channel with a sequent depth ratio of 2: upstream Froude number
- and 18 more (2025 CE2, 2025 CE1, 2024 CE2, 2024 CE1, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Prismatic and mobile channels, steady and unsteady flows, rapidly varied flow and hydraulic jump
Flow past sharp crested weirs.
Hydrology
25 questions and 40 marks in GATE CE 2022 to 2026. 6 of its 7 syllabus items were asked. Solved questions: Hydrology and irrigation, Fluid mechanics and hydraulics.
Official syllabus text
Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration; Streamflow measurements, unit hydrographs, hydrograph analysis, reservoir capacity, flood estimation and routing, surface runoff models, ground water hydrology – steady state well hydraulics and aquifers; Application of Darcy's Law.
Hydrology: Hydrologic cycle, precipitation, evaporation, evapo-transpiration, watershed, infiltration
- 2026 CE2 Q.20 Mass curve of rainfall: can its slope be positive, and can it be zero
- 2025 CE1 Q.39 Four rain gauges, one outside the catchment, Thiessen weights given: Thiessen vs arithmetic mean rainfall
- 2025 CE1 Q.61 100 km trapezoidal canal, bed 10 m, 1:1 sides, depth 2.5 m, Class A pan 0.5 cm/day: April evaporation loss
- 2024 CE2 Q.56 Phi-index of an 8-hour storm of 11 cm that produced 6 cm of direct runoff
- and 5 more (2023 CE2, 2023 CE1, 2022 CE2)
Streamflow measurements
unit hydrographs, hydrograph analysis
- 2025 CE2 Q.26 Lower drainage density, all else equal: effect on the flood hydrograph peak and time base
- 2025 CE2 Q.59 Flood peak 180 m3/s from a 3 h storm of 6.6 cm, loss 0.2 cm/h, base flow 30 m3/s: 3-h unit hydrograph peak
- 2025 CE1 Q.20 Order of steps from an isolated storm to the total flood hydrograph at the catchment outlet
- 2024 CE1 Q.56 Peak of the 3-hour unit hydrograph derived from given 1-hour unit hydrograph ordinates
- and 2 more (2023 CE1, 2022 CE1)
reservoir capacity
flood estimation and routing
- 2026 CE2 Q.32 Probability that a storm with a 15-year return period occurs at least once in the next 10 years
- 2026 CE2 Q.43 Match hydrologic, hydraulic, reservoir and channel routing with Muskingum, Modified Puls and characteristics
- 2026 CE1 Q.55 Risk that a bridge with a 50-year life, designed for the 100-year flood, sees that flood exceeded
- 2025 CE1 Q.34 Water resources project, 25-year life, acceptable risk 5%: return period of the design flood
- and 1 more (2022 CE2)
surface runoff models
ground water hydrology – steady state well hydraulics and aquifers; Application of Darcy's Law.
- 2026 CE1 Q.53 Transmissibility of a 30 m unconfined aquifer from drawdowns of 12 m and 11 m at 10 m and 100 m (Dupuit-Thiem)
- 2025 CE2 Q.58 60 cm well fully penetrating a 10 m confined aquifer, K = 0.0005 m/s, drawdown 1 m, R = 300 m: discharge
- 2024 CE1 Q.35 Steady pumping rate of a well in a 20 m unconfined aquifer from drawdowns at 10 m and 100 m (Dupuit)
Irrigation
11 questions and 15 marks in GATE CE 2022 to 2026. 5 of its 9 syllabus items were asked. Solved questions: Hydrology and irrigation.
Official syllabus text
Irrigation: Types of irrigation systems and methods; Crop water requirements – Duty, delta, evapo-transpiration; Gravity dams and spillways; Lined and unlined canals, Design of weirs on permeable foundation; cross drainage structures; River training structures; Earthen dams; Seepage through dams; Well irrigation.
Irrigation: Types of irrigation systems and methods
Crop water requirements – Duty, delta, evapo-transpiration
- 2026 CE2 Q.19 Outlet discharge for a CCA of 10000 ha, base period 140 days and watering depth (delta) 40 cm
- 2026 CE1 Q.17 Duty on capacity of a canal delivering 10 cumec to 7500 ha when losses are 50 % of the head discharge
- 2023 CE1 Q.33 Minimum canal discharge for 100 ha of wheat when 12 cm is needed in the most intense 30-day period
- 2022 CE2 Q.20 Actual evapotranspiration from reference ET 6 mm/day, crop coefficient 1.2 and soil coefficient 0.8
- and 1 more (2022 CE1)
Gravity dams and spillways
Lined and unlined canals
Design of weirs on permeable foundation
cross drainage structures
River training structures
Earthen dams; Seepage through dams
Well irrigation.
Water and Wastewater
45 questions and 74 marks in GATE CE 2022 to 2026. 6 of its 11 syllabus items were asked. Solved questions: Water, wastewater, air, noise and solid waste.
Official syllabus text
Water and Waste Water Quality and Treatment: Basics of water quality standards – Physical, chemical and biological parameters; Water quality index; Unit processes and operations; Water requirement; Water distribution system; Drinking water treatment. Sewerage system design, quantity of domestic wastewater, primary, secondary and tertiary treatment. Effluent discharge standards; Sludge treatment and disposal; Reuse of treated sewage for different applications.
Water and Waste Water Quality and Treatment: Basics of water quality standards – Physical, chemical and biological parameters
- 2026 CE2 Q.42 2.4 ml of raw sewage diluted to 240 ml, DO 8 mg/l initially and 6 mg/l after 5 days: BOD5
- 2025 CE2 Q.49 Compound CaHbOcNd, molecular weight 187, 935 mg/l with TOC 360, COD 600, TKN 140 mg/l: find a, b, c, d
- 2025 CE2 Q.61 Ion analysis with Ca, Mg, Fe, Na, K, CO3, HCO3 and Cl as CaCO3: non-carbonate hardness
- 2025 CE1 Q.44 MgCl2 and CaSO4 dissolved to give TDS 500 mg/l and total hardness 400 mg/l as CaCO3: amounts added
- and 11 more (2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Water quality index
Unit processes and operations
- 2026 CE1 Q.22 Which law governs the settling velocity of inorganic particles in a sedimentation tank?
- 2026 CE1 Q.65 Rectangular sedimentation tank for 12 MLD, depth 4 m, detention 6 h, flow velocity 0.003 m/s: width
- 2025 CE1 Q.31 Sedimentation tank at SOR 45 m3/m2/d: smallest inorganic (G 2.65) and organic (G 1.20) particles fully removed
- 2024 CE2 Q.42 Anthracite (G 1.5), silica sand 0.20 mm (G 2.6), ilmenite (G 4.2): diameters that keep three layers after backwash
- and 4 more (2024 CE1, 2023 CE1, 2022 CE1)
Water requirement
Water distribution system
Drinking water treatment.
- 2026 CE2 Q.63 Water analysis with HCO3 1.0 mM and CO3 0.01 mM, pKa of HOCl 7.5: percentage of HOCl in free chlorine
- 2026 CE1 Q.21 Rapid sand filter 0.8 m deep, porosity 40 % in service and 70 % in backwash: expanded depth
- 2025 CE2 Q.34 Free residual chlorine 2 mg/l as Cl2 at pH 8.5, pK 7.5: HOCl concentration in micromoles per litre
- 2025 CE1 Q.21 Fecal coliform falls from 10780 to 23 cfu per 100 ml through treatment: log kill
- and 4 more (2025 CE1, 2024 CE1, 2023 CE2, 2022 CE1)
Sewerage system design, quantity of domestic wastewater
primary, secondary and tertiary treatment.
- 2026 CE2 Q.29 Treatment unit in which grown algae are useful
- 2026 CE2 Q.64 Anaerobic treatment, Y = 0.06 g VSS per g COD, biomass C6H7NO2: percentage of COD converted to biomass
- 2026 CE1 Q.25 Components NOT removed in the secondary treatment of sewage
- 2026 CE1 Q.63 Activated sludge plant, 20000 m3/day, V 6000 m3, MLSS 3000 mg/l, SRT 6 days, recycle 6000 m3/day: waste flow
- and 4 more (2025 CE2, 2025 CE1, 2024 CE2, 2023 CE1)
Effluent discharge standards
Sludge treatment and disposal
- 2026 CE2 Q.28 Sludge solids one-third fixed (SG 2.5) and two-thirds volatile (SG 1.0): specific gravity of all solids
- 2024 CE2 Q.26 Which product is NOT obtained in anaerobic decomposition of glucose: CO2, CH4, H2S or H2O
- 2023 CE2 Q.49 Aerobic composting of sewage sludge: bulking agent, leachate, actinomycetes, in-vessel plug flow
- 2022 CE2 Q.60 5000 m3/day, TSS 200 mg/L, 60 percent removal, sludge thickened from 2 to 6 percent solids: daily volume
Reuse of treated sewage for different applications.
Air Pollution
13 questions and 19 marks in GATE CE 2022 to 2026. 3 of its 3 syllabus items were asked. Solved questions: Water, wastewater, air, noise and solid waste.
Official syllabus text
Air Pollution: Types of pollutants, their sources and impacts, air pollution control, air quality standards, Air quality index and limits.
Air Pollution: Types of pollutants, their sources and impacts
- 2025 CE1 Q.22 Hydrocarbon CnHm burnt in air (O2 + 3.78 N2): stoichiometric fuel to air mass ratio
- 2024 CE1 Q.31 Which of sulphur dioxide, lead, ozone and sulphuric acid are primary air pollutants
- 2023 CE2 Q.34 Temperature 14.2 C at 5 m and 16.9 C at 325 m: existing environmental lapse rate per 100 m
- 2023 CE2 Q.45 Match aromatic hydrocarbons, carbon monoxide, sulfur oxides and ozone with their adverse health effects
- and 4 more (2023 CE1, 2022 CE2)
air pollution control
- 2026 CE2 Q.27 Match dust, CO, SO2 and fine fly ash with cyclone, wet lime scrubber, ESP and catalytic converter
- 2026 CE2 Q.65 Cyclone 80 % efficient followed by an ESP 50 % efficient, inlet 10 mg/m3: exit particle concentration
- 2025 CE2 Q.63 Air settling chamber 12 m long, 2 m high, 0.2 m/s, particles of G 2.65: smallest size removed completely
- 2024 CE2 Q.25 Match NO2, SO2, CO and particles to NH3 injection, lime scrubbing, flaring and cyclonic separator
air quality standards, Air quality index and limits.
Municipal Solid Wastes
11 questions and 16 marks in GATE CE 2022 to 2026. 2 of its 3 syllabus items were asked. Solved questions: Water, wastewater, air, noise and solid waste.
Official syllabus text
Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes, engineered systems for solid waste management (reuse/recycle, energy recovery, treatment and disposal); Basics of landfill design and operation.
Municipal Solid Wastes: Characteristics, generation, collection and transportation of solid wastes
- 2023 CE2 Q.22 What 'haul' covers in a hauled container system operated in conventional mode
- 2023 CE1 Q.62 Solid waste of five components, 26 % moisture: energy content on a dry-weight basis
- 2022 CE2 Q.26 Moisture content of food, paper and glass waste and energy content of plastic, food and glass waste
- 2022 CE2 Q.27 Rules for an optimum municipal solid waste collection route: which one is NOT desired
engineered systems for solid waste management (reuse/recycle, energy recovery, treatment and disposal)
- 2025 CE2 Q.27 Treatment technology not recommended for highly biodegradable organic solid wastes
- 2025 CE1 Q.46 OFMSW (315 kg/m3, 30% water) mixed with sludge (700 kg/m3, 70% water) to 40% water: sludge per kg and density
- 2024 CE2 Q.61 Organic waste C240O200H180N5S burnt with all sulphur to SO2: grams of SO2 per kg of waste
- 2024 CE1 Q.21 Match MSW components (ferrous, aluminium and copper, food waste, cardboard) to separation or treatment
- and 3 more (2023 CE1, 2022 CE2)
Basics of landfill design and operation.
Transportation Infrastructure
27 questions and 34 marks in GATE CE 2022 to 2026. 4 of its 6 syllabus items were asked. Solved questions: Highways, pavements, traffic and railways.
Official syllabus text
Transportation Infrastructure: Geometric design of roadways using IRC codes – crosssectional elements, sight distances, classifications of roadways, design vehicle, horizontal and vertical alignments. Geometric design of railway Track – Speed and cant. Concept of airport runway length, calculations and corrections; taxiway and exit taxiway design.
Transportation Infrastructure: Geometric design of roadways using IRC codes – crosssectional elements
Reworded in 2027 (2026: “Geometric design of highways - cross-sectional elements”).
sight distances
- 2026 CE2 Q.23 SSD needed when an incident diverts traffic onto the other carriageway of a four-lane divided road (360 m normally)
- 2024 CE1 Q.22 Stopping distance of a car at 60 km/h on a 2% down gradient with 60% brake efficiency
- 2023 CE2 Q.23 Stopping sight distance equals braking distance plus the distance travelled during perception-reaction time
classifications of roadways, design vehicle
horizontal and vertical alignments.
- 2026 CE2 Q.34 Length of a vertical curve: downgrade 1 in 100 meets upgrade 1 in 125, rate of change of grade 0.10 % per 30 m
- 2026 CE2 Q.61 Valley curve length from headlight sight distance: 1 in 40 down meets 1 in 50 up, SSD 90 m, beam 1.2 degrees
- 2026 CE1 Q.47 Geometric design of highways: friction for curves vs sight distance, superelevation, grade compensation, summit curves
- 2025 CE2 Q.20 The point where a road alignment changes from a tangent to a curve
- and 9 more (2025 CE2, 2025 CE1, 2024 CE2, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Geometric design of railway Track – Speed and cant.
- 2026 CE2 Q.24 Cant deficiency and cant excess: which relates to faster trains and which to slower ones?
- 2026 CE1 Q.24 Cant on a Broad Gauge track for equilibrium speed V, dynamic gauge G and radius R: which formulae are right?
- 2025 CE1 Q.25 Maximum degree of curve allowed for railways in a mountainous region
- 2024 CE2 Q.62 Maximum speed on a 1080 m Broad Gauge curve built for 70 km/h with 10 cm cant deficiency
- and 1 more (2024 CE1)
Concept of airport runway length, calculations and corrections; taxiway and exit taxiway design.
- 2026 CE2 Q.25 What is the primary purpose of a windrose diagram in airport design?
- 2026 CE1 Q.19 Corrections to the basic runway length for elevation, temperature and effective gradient
- 2025 CE2 Q.19 Runway 700 m after elevation and temperature corrections: length after the 1 % effective gradient correction
- 2024 CE2 Q.27 Effective gradient of a 2,000 m runway from five longitudinal sections and their gradients
- and 2 more (2024 CE1, 2022 CE2)
Highway Pavements
16 questions and 27 marks in GATE CE 2022 to 2026. 4 of its 4 syllabus items were asked. Solved questions: Highways, pavements, traffic and railways.
Official syllabus text
Highway Pavements: Highway materials – desirable properties and tests; Desirable properties of bituminous paving mixes; Design factors for flexible and rigid pavements; Design of flexible and rigid pavement using IRC codes.
Highway Pavements: Highway materials – desirable properties and tests
- 2025 CE2 Q.28 Bitumen softening point in warm climates, viscosity, 3-5 % air voids and solubility: which is incorrect
- 2025 CE1 Q.24 Bitumen tests: penetration, ring and ball softening point and ductility, which statement is false
- 2024 CE2 Q.46 Correct statements on CBR origin correction, aggregate tests, VG bitumen grading and VMA
- 2024 CE1 Q.24 Which statement on bitumen is false: kinematic viscosity, softening point, flash point or ductility?
- and 1 more (2023 CE1)
Desirable properties of bituminous paving mixes
- 2026 CE1 Q.61 Voids Filled with Bitumen of a mix with 58/25/12/5 % coarse, fine, filler and binder and bulk specific gravity 2.2
- 2025 CE1 Q.65 Compacted bituminous specimen 1260 g in 525 cm3, theoretical maximum specific gravity 2.510: air voids
- 2023 CE2 Q.51 Marshall mix design: how stability, flow, air voids and VFB change as bitumen content increases
- 2022 CE2 Q.64 Air voids in a mix of 260 g coarse (G 2.6) and 240 g fine (G 2.4) aggregate with bulk specific gravity 2.3
Design factors for flexible and rigid pavements
- 2026 CE2 Q.40 Rigid pavements: bottom-up cracking at the edge and top-down fatigue cracking, are both statements true?
- 2026 CE2 Q.45 Which stresses are considered in rigid pavement design: warping, frictional, maximum or sum of stresses?
- 2025 CE2 Q.43 Match vehicle damage factor, PCU, perception-reaction time and CBR with their uses
- 2024 CE2 Q.29 Critical stress combination in a jointed plain concrete slab at summer midnight
- and 1 more (2022 CE1)
Design of flexible and rigid pavement using IRC codes.
Traffic Engineering
19 questions and 35 marks in GATE CE 2022 to 2026. 4 of its 6 syllabus items were asked. Solved questions: Highways, pavements, traffic and railways.
Official syllabus text
Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data; Microscopic and macroscopic parameters of traffic flow, fundamental relationships; Traffic signs; Signal design by Webster's method; Types of intersections and interchanges; Highway capacity and level of service.
Traffic Engineering: Traffic studies on flow and speed, peak hour factor, accident study, statistical analysis of traffic data
Microscopic and macroscopic parameters of traffic flow, fundamental relationships
- 2026 CE2 Q.60 Maximum flow from Greenberg's speed-density model with v0 = 45 km/h and jam density 200 veh/km
- 2026 CE1 Q.33 Space mean speed of three vehicles with travel times 4, 5 and 8 minutes on a 2 km stretch
- 2025 CE2 Q.50 Linear speed-density, free flow 100 km/h, capacity 4000 veh/h: speeds at a volume of 2000 veh/h
- 2025 CE1 Q.40 Speed constant at 90 km/h up to 10 veh/km, then linear to jam density 100: maximum flow
- and 8 more (2024 CE1, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Traffic signs
Signal design by Webster's method
Types of intersections and interchanges
Highway capacity and level of service.
Transportation Planning
0 questions and 0 marks in GATE CE 2022 to 2026. 0 of its 1 syllabus items were asked.
Official syllabus text
Transportation Planning: Four step travel demand modelling – trip generation, trip distribution, mode choice, traffic assignment and its applications.
Transportation Planning: Four step travel demand modelling – trip generation, trip distribution, mode choice, traffic assignment and its applications.
Surveying and Photogrammetry
34 questions and 47 marks in GATE CE 2022 to 2026. 6 of its 11 syllabus items were asked. Solved questions: Surveying, levelling, GPS and remote sensing.
Official syllabus text
Principles of surveying; Plane and geodetic surveying, GNSS surveying, errors and their adjustment; Maps – Scale, coordinate system; Distance and angle measurement – Levelling and trigonometric levelling; Traversing and triangulation survey; Total station; Principles of topographic, cadastral, engineering; Introduction to cartography, map projections. Photogrammetry – Introduction to photogrammetry, digital photogrammetry, photographic scale, flying height; Space resection, parallax equations, elevations by parallax differences, camera calibration.
Principles of surveying
Plane and geodetic surveying, GNSS surveying
errors and their adjustment
Maps – Scale, coordinate system
- 2026 CE2 Q.35 Walking distance for 12.0 cm measured on a 1:25000 city map along a straight road
- 2025 CE2 Q.35 Distance measured on a 1 cm = 40 m plan with a 1 cm = 20 m scale: the true distance
- 2024 CE1 Q.45 Slope of the ground between adjacent contours 10 mm apart on a 1:1000 map with a 1 m contour interval
- 2022 CE1 Q.36 New coordinates of point (1, 1, 1) after the axes are rotated 45 degrees clockwise about the positive x-axis
Distance and angle measurement – Levelling and trigonometric levelling
- 2026 CE2 Q.41 Levelling from benchmark L (RL 150.000 m) to N with two set-ups: match the sum of BS, sum of FS and RL of N
- 2026 CE1 Q.34 Temperature correction for a 200 m line measured with a 30 m tape standardised at 25 C and used at 35 C
- 2026 CE1 Q.35 Reduced level of a ground point from the height of collimation 100.000 m and a back sight of 1.500 m
- 2026 CE1 Q.43 Reciprocal levelling across a wide valley: differences of 3.0 m and -1.0 m from the two ends, true difference
- and 14 more (2026 CE1, 2025 CE1, 2024 CE2, 2024 CE1, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Traversing and triangulation survey
- 2026 CE2 Q.62 What is the total angular error of a closed four-sided traverse ABCDA from its measured interior angles?
- 2026 CE1 Q.20 Latitude and departure of a 100 m line AB with a whole circle bearing of 150 degrees
- 2025 CE2 Q.65 Interior angle ABC from the fore bearings of AB (60 degrees) and BC (122 degrees)
- 2024 CE2 Q.64 Length of the closing line RP of a walk P to Q at 30 degrees and Q to R at 90 degrees, 4 m each
- and 2 more (2024 CE1, 2023 CE2)
Total station
Principles of topographic, cadastral, engineering
Introduction to cartography, map projections.
Photogrammetry – Introduction to photogrammetry, digital photogrammetry, photographic scale, flying height
- 2024 CE2 Q.30 Focal length for vertical aerial photographs at 1:13000, flying height 3000 m, terrain at 1050 m
- 2023 CE2 Q.35 Scale of a vertical aerial photograph covering 6 km by 3 km of ground on a 30 cm by 15 cm print
- 2022 CE1 Q.23 Scale of a vertical aerial photograph: flying height 3.5 km above MSL, focal length 152 mm, ground at 460 m
Space resection, parallax equations, elevations by parallax differences, camera calibration.
Construction Materials
11 questions and 11 marks in GATE CE 2022 to 2026. 3 of its 3 syllabus items were asked. Solved questions: Construction materials and management.
Official syllabus text
Construction Materials: Steel – Composition, material properties and behaviour; Cement – composition, hydration and microstructure, chemical and mineral admixtures; Concrete – Constituents, mix design, short-term and long-term properties.
Construction Materials: Steel – Composition, material properties and behaviour
Reworded in 2027 (2026: “Structural Steel – Composition, material properties and behaviour”).
Cement – composition, hydration and microstructure, chemical and mineral admixtures
Concrete – Constituents, mix design, short-term and long-term properties.
- 2026 CE1 Q.15 Which property describes the long-term deformation of concrete under sustained loading?
- 2025 CE2 Q.23 Target mean strength, ten percent fines, secant modulus and carbon in steel: which statements are correct?
- 2025 CE1 Q.16 Which statement about what changes the measured compressive strength of concrete is false?
- 2025 CE1 Q.33 Fineness modulus from 30, 35, 15 and 20 percent retained on the 2.36 mm, 1.18 mm, 600 and 300 micron sieves
- and 3 more (2024 CE1, 2023 CE1)
Working through mix design by hand? Our IS 10262:2019 concrete mix design calculator shows every step of the method.
Construction Management
8 questions and 14 marks in GATE CE 2022 to 2026. 3 of its 6 syllabus items were asked. Solved questions: Construction materials and management.
Official syllabus text
Construction Management: Types of construction projects; Estimation and costing – Quantity estimation using long wall and short wall method, center line method, analysis of rates; Project planning and scheduling: AOA and AON network analysis – PERT and CPM; Project updating and monitoring; Construction equipment – Equipment for earthwork, concreting, hoisting and transportation of materials; Types of contracts.
Construction Management: Types of construction projects
Estimation and costing – Quantity estimation using long wall and short wall method, center line method, analysis of rates
Project planning and scheduling: AOA and AON network analysis – PERT and CPM
- 2025 CE2 Q.53 What is the total float of activity E in a six-activity arrow network of a construction project?
- 2025 CE1 Q.42 Dummy activity, PERT, Gantt chart and free float: which project management statements are true?
- 2024 CE2 Q.38 Is crashing a critical activity from 15 to 12 days worth it at indirect costs of Rs 8,500 and Rs 10,000 per day?
- 2024 CE2 Q.52 What is the total project duration from this activity table with durations and dependencies?
- and 2 more (2022 CE2, 2022 CE1)
Project updating and monitoring
Construction equipment – Equipment for earthwork, concreting, hoisting and transportation of materials
Types of contracts.
General Aptitude: Verbal Aptitude
General Aptitude questions on this part in the eight CE papers of 2022 to 2025: 17 (26 marks). In 2026 both CE sets shared their aptitude questions with the EE and ME papers. Solved questions: General Aptitude: Verbal and Reasoning.
Official syllabus text
Basic English grammar: tenses, articles, adjectives, prepositions, conjunctions, verb-noun agreement, and other parts of speech. Basic vocabulary: words, idioms, and phrases in context. Reading and comprehension, Narrative sequencing.
Basic English grammar: tenses, articles, adjectives, prepositions, conjunctions, verb-noun agreement, and other parts of speech.
- 2025 CE2 Q.2 The President, along with the Council of Ministers, ___ to visit India next week: wish, wishes, will wish or is wishing?
- 2025 CE1 Q.1 Is there any good show ___ television tonight: in, at, within or on?
- 2024 CE2 Q.6 Yoko Roi stands ___ as an author for standing ___ as a fellow: which four prepositions fit?
- 2024 CE1 Q.6 Javelin passage: athletics ___ the potential, the crowd ___, cross-steps ___, his body ___. Which verbs fit?
- and 4 more (2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Basic vocabulary: words, idioms, and phrases in context.
Reading and comprehension, Narrative sequencing.
- 2025 CE2 Q.6 E.V. Lucas's 'A Funeral': what does the passage say about the solitary man?
- 2025 CE1 Q.6 Belloc's 'The Crooked Streets': which statement follows only from the passage?
- 2023 CE2 Q.6 Elvesland white and yellow flowers: which statements can be logically inferred with certainty?
- 2023 CE2 Q.8 Apenyo passage (These Hills Called Home): which statement about her mother can be inferred with certainty?
- and 3 more (2023 CE1, 2022 CE2, 2022 CE1)
General Aptitude: Quantitative Aptitude
General Aptitude questions on this part in the eight CE papers of 2022 to 2025: 37 (56 marks). In 2026 both CE sets shared their aptitude questions with the EE and ME papers. Solved questions: General Aptitude: Quantitative.
Official syllabus text
Data interpretation: data graphs (bar graphs, pie charts, and other graphs representing data), 2-and 3-dimensional plots, maps, and tables. Numerical computation and estimation: ratios, percentages, powers, exponents and logarithms, permutations and combinations, and series. Mensuration and geometry, Elementary statistics and probability.
Data interpretation: data graphs (bar graphs, pie charts, and other graphs representing data), 2-and 3-dimensional plots, maps, and tables.
Numerical computation and estimation: ratios, percentages, powers, exponents and logarithms, permutations and combinations, and series.
- 2025 CE2 Q.3 40 W desk light, 10 hours a night for 180 days at Rs 7 per kWh: cost, and % increase for 2 more hours?
- 2025 CE2 Q.5 Y + 2V = 50, V + G = 50, Y + R = 50, V + 2R = 50: which pie chart shows the balls in the bag?
- 2025 CE2 Q.9 Potatoes at Rs 800 for 5 kg and Rs 800 for 4 kg, mixed and sold at Rs 192/kg for 8% profit: P:Q ratio?
- 2025 CE1 Q.3 Sum of the infinite series 1/1! + 1/2! + 1/3! + 1/4! + 1/5! + ...
- and 19 more (2025 CE1, 2024 CE2, 2024 CE1, 2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Mensuration and geometry
- 2025 CE2 Q.10 Villages with PQ = 13 km, QR = 14 km, RP = 15 km: shortest road from P to the road QR?
- 2025 CE1 Q.9 Circle centre (0.5, 0) radius 0.5 meets circle centre (1, 1) radius 1: which point is an intersection?
- 2024 CE2 Q.7 Seven equal chalk sticks fill a cylinder (one centre, six around): ratio of occupied to empty space?
- 2024 CE1 Q.10 At half moon the Moon-Earth-Sun angle is 89.85 degrees: ratio of Earth-Sun to Earth-Moon distance?
- and 6 more (2023 CE2, 2023 CE1, 2022 CE2, 2022 CE1)
Elementary statistics and probability.
General Aptitude: Analytical Aptitude
General Aptitude questions on this part in the eight CE papers of 2022 to 2025: 15 (21 marks). In 2026 both CE sets shared their aptitude questions with the EE and ME papers. Solved questions: General Aptitude: Verbal and Reasoning, General Aptitude: Spatial.
Official syllabus text
Logic: deduction and induction, Analogy, Numerical relations and reasoning.
Logic: deduction and induction
- 2024 CE2 Q.2 All heroes are winners and all winners are lucky: which of the three inferences follow?
- 2023 CE1 Q.4 Donald Duck says “All ducks always lie.” What can be inferred with certainty?
- 2023 CE1 Q.6 Given only that ‘some humans are intelligent’, which statement follows with certainty?
- 2022 CE2 Q.9 Some soaps are clean; all clean objects are wet. Which of four conclusions follow?
- and 1 more (2022 CE1)
Analogy
- 2024 CE2 Q.1 Drizzle, rain, downpour is to which word, quarrel, feud, in increasing intensity?
- 2024 CE1 Q.1 Simmer, seethe, smolder is to break, raze and which word, in increasing intensity?
- 2023 CE2 Q.2 Kind : ___ :: Often : Seldom (by word meaning): Cruel, Variety, Type or Kindred?
- 2023 CE1 Q.2 Eject : Insert :: Advance : ___ (by word meaning): Advent, Progress, Retreat or Loan?
Numerical relations and reasoning.
- 2025 CE2 Q.4 Grid of 2x2 blocks (N 21, U 14 | F 9, (i) 6 | H 12, L (iv) | (ii) 15, O (iii)): fill (i) to (iv)
- 2025 CE2 Q.7 Letter clock: O* is O Q S Z P R T and X* is X Z P W Y O Q. What is P*?
- 2025 CE2 Q.8 Five-digit PQRST from digits 1 to 5 with P less than Q and S, T less than P, R less than T: what is P?
- 2024 CE1 Q.9 4 x 4 grid where each number counts the crosses around it: most crosses possible in the empty column?
- and 2 more (2022 CE2, 2022 CE1)
General Aptitude: Spatial Aptitude
General Aptitude questions on this part in the eight CE papers of 2022 to 2025: 11 (17 marks). In 2026 both CE sets shared their aptitude questions with the EE and ME papers. Solved questions: General Aptitude: Spatial.
Official syllabus text
Transformation of shapes: translation, rotation, scaling, mirroring, assembling, and grouping paper folding, cutting, and patterns in 2 and 3 dimensions.
Transformation of shapes: translation, rotation, scaling, mirroring, assembling, and grouping
- 2025 CE1 Q.5 Shaded discs: a quarter, then 135 degrees, then a half. Which disc comes next at IV?
- 2025 CE1 Q.8 Colour model Y, M, Cy with R, G, Bl and K overlaps: which redrawn diagram is labelled consistently?
- 2025 CE1 Q.10 Plus shapes with four corner dots: which one has 4-fold rotational symmetry?
- 2024 CE2 Q.10 A cube is held with a body diagonal vertical: the smallest rotation about it that leaves the view unchanged?
- and 4 more (2023 CE2, 2023 CE1, 2022 CE2)
paper folding, cutting, and patterns in 2 and 3 dimensions.
- 2025 CE1 Q.4 A 12 m wire is bent, cut and soldered into the edges of a 1 m cube: minimum number of cuts?
- 2024 CE2 Q.9 Five cubes and a small cube: Figure B is the view from X. Which picture is the view from Y?
- 2022 CE1 Q.10 Cube with a lined front, black top and grey right face: which net can fold into it?
How many sections are in the GATE 2027 CE syllabus?
Eight: Engineering Mathematics, Structural Engineering, Geotechnical Engineering, Water Resources Engineering, Environmental Engineering, Transportation Engineering, Geomatics Engineering, and (new as a separate section) Construction Materials and Management. They cover 27 subject blocks on this page. General Aptitude (15 marks) is common to all GATE papers and has its own syllabus: verbal, quantitative, analytical and spatial aptitude.
Where is the official GATE 2027 CE syllabus PDF?
On the GATE 2027 website run by IIT Madras, under Exam Papers and Syllabus: the file is CE_GATE2027_Syllabus.pdf. This page reproduces its wording item by item, marks what is new or expanded against the GATE 2026 PDF, and adds which items were actually asked in GATE CE 2022 to 2026. GATE 2027 runs from 6 to 21 Feb 2027.
Marks per subject and section in each paper: GATE CE subject-wise weightage. Qualifying marks: GATE CE cut-offs.
How this page was made
We split the official 2027 syllabus into 170 items (158 CE, 12 General Aptitude), keeping IIT Madras's wording, and compared each line with the GATE 2026 CE PDF to mark what is new, expanded or dropped (a script checks every quoted line against both PDFs). Then we filed each of the 630 solved questions (550 core questions from the 10 GATE CE papers 2022 CE1 to 2026 CE2, plus the 80 aptitude questions of 2022 to 2025) under the one 2027 item it mainly tests, or under the dropped 2026 line it tests. A question that needs two topics counts once, under the one that does the work, so read the counts as "how often this was the point of a question". Marks come from the official answer keys; the per-paper subject totals are on the GATE CE weightage page.