GATE Civil: Linear Algebra (matrices, determinants, rank, eigenvalues), previous-year questions solved, part 2
Part 2 of 2 of the Linear Algebra hub: 12 more official GATE CE questions on eigenvalues, eigenvectors, trace and definiteness, each solved step by step and checked against the official answer key. Part 1 covers matrix algebra, determinants, rank and linear systems.
Questions from the ten official GATE CE papers, sessions CE1 and CE2 of GATE 2022 (IIT Kharagpur), 2023 (IIT Kanpur), 2024 (IISc Bengaluru), 2025 (IIT Roorkee) and 2026 (IIT Guwahati); solutions by Skill-Lync. · Updated 17 Nov 2026 · 12 of 22 questions on this page
Which are eigenvalues of Q = M cubed - 4M squared - 2M when M has eigenvalues 5 and -2?
The matrix M is defined as
and has eigenvalues and . The matrix Q is formed as
Which of the following is/are the eigenvalue(s) of matrix Q?
- (A)15
- (B)25
- (C)−20
- (D)−30
Answer: (A, C) Official key: A, C
- If , then and . So a polynomial in has the same eigenvectors, with eigenvalues .
- : . Option (A) is an eigenvalue.
- : . Option (C) is an eigenvalue.
- Direct check: and give , with trace and determinant , so and or .
- A 2 by 2 matrix has only these two eigenvalues, so (B) 25 and (D) are not eigenvalues. Answer: (A, C).
Trap: 25 is just , what you get by squaring the eigenvalue instead of applying the whole polynomial. Always push each eigenvalue of through every term of .
Modal analysis in ETABS or STAAD.Pro is an eigenvalue problem built from the stiffness and mass matrices: the eigenvalues give the squared natural frequencies of a building and the eigenvectors its mode shapes. The fact that a matrix polynomial keeps the eigenvectors is what lets solvers shift and scale these problems without solving them again.
For the pure shear strain matrix with rows (1, 1) and (1, -1), what is Trace(strain to the 8) + Trace(strain to the 11)?
The components of pure shear strain in a sheared material are given in the matrix form:
Here, . Given, and .
The numerical value of is ________. (in integer)
Answer: 32 Official key: 32 to 32
- Square the matrix: .
- So and .
- , so .
- 32.
- Eigenvalue check: has trace 0 and determinant , so , and : 32 for , 0 for .
Trap: writing (the identity here is 2 by 2, with trace 2), or treating the odd power like an even one and getting 64.
The strain matrix is the tensor that strain-gauge rosettes and finite element programs report at a point. Its trace is the volumetric strain, zero here because pure shear changes shape but not volume, and its eigenvalues are the principal strains used to judge where concrete or rock will crack.
For a non-zero 2022 x 1 vector y, which statements about the matrix y y-transpose are true?
Let be a non-zero vector of size . Which of the following statement(s) is/are TRUE?
- (A) is a symmetric matrix.
- (B) is an eigenvalue of .
- (C) has a rank of 2022.
- (D) is invertible.
Answer: (A, B) Official key: A, B
- Let , a 2022 by 2022 matrix with entries .
- (A) True: .
- (B) True: . The number is an eigenvalue, with eigenvector .
- (C) False: column of is , a multiple of , so the rank is 1, not 2022.
- (D) False: a 2022 by 2022 matrix of rank 1 is singular. Every vector orthogonal to is sent to zero, so 0 is an eigenvalue and the determinant is 0.
- Answer: (A, B).
Trap: confusing (the outer product, a full-size matrix of rank 1) with (the inner product, a single number). Exact elimination on small examples confirms rank 1 whatever the size.
Outer products build matrices in structural software: the global stiffness matrix of a single truss bar is AE/L times the outer product of the vector of direction cosines (c, s, -c, -s), a symmetric rank-one matrix, which is why one bar on its own cannot be inverted until supports and other members are assembled.
Which products of an arbitrary real square matrix M always have non-negative eigenvalues?
If is an arbitrary real matrix, then which of the following matrices will have non-negative eigenvalues?
- (A)
- (B)
- (C)
- (D)
Answer: (B, C) Official key: B, C
- (B) True. is symmetric, so its eigenvalues are real, and for any vector , . A symmetric matrix with a non-negative quadratic form is positive semi-definite: every eigenvalue is .
- (C) True by the same argument: .
- (A) False. The eigenvalues of are , and can be complex. The rotation has , and has eigenvalue .
- (D) False. has the same eigenvalues as , so the same rotation is a counterexample.
Answer: (B, C).
Trap: squaring a real number never makes it negative, so (A) feels safe. That only holds for real eigenvalues, which a non-symmetric need not have.
The product of a matrix with its transpose is how a structural stiffness matrix is assembled from the strain-displacement and material matrices, and how least-squares normal equations are formed when adjusting a survey traverse or a levelling network. Its non-negative eigenvalues are why a properly supported structure in STAAD or ETABS has a positive definite stiffness matrix.
For a given 3x3 matrix, which statements about the eigenvalues and eigenvectors of its transpose and inverse are true?
For the matrix
which of the following statements is/are TRUE?
- (A)The eigenvalues of are same as the eigenvalues of
- (B)The eigenvalues of are the reciprocals of the eigenvalues of
- (C)The eigenvectors of are same as the eigenvectors of
- (D)The eigenvectors of are same as the eigenvectors of
Answer: (A, B, D) Official key: A, B, D
- Characteristic equation: , so and ; the inverse exists.
- (A) True. , so has the same polynomial and eigenvalues.
- (B) True. From , multiply by : . The eigenvalues of are .
- (D) True by the same line: keeps the eigenvector .
- (C) False. Every row of sums to 6, so is an eigenvector of for . But , not a multiple of ; the eigenvector of for 6 is . Transposing keeps eigenvalues, not eigenvectors, unless is symmetric.
Answer: (A, B, D).
Trap: because (A) is true, (C) looks like its twin. It fails for any non-symmetric matrix, and this is not symmetric.
Eigenvalue problems sit behind modal analysis in ETABS and STAAD, where the eigenvalues give natural frequencies and the eigenvectors the mode shapes used for IS 1893 response spectrum analysis. Flexibility and stiffness matrices are inverses of each other, which is why they share mode shapes with reciprocal eigenvalues.
For a singular symmetric 3x3 matrix, which statements on uniqueness, eigenvectors and definiteness hold?
For the matrix
which of the following statements is/are TRUE?
- (A) has a unique solution
- (B) does not have a unique solution
- (C) has three linearly independent eigenvectors
- (D) is a positive definite matrix
Answer: (B, C) Official key: B, C
- . Every row sums to zero, so .
- (A) False, (B) True. A singular matrix gives either no solution or infinitely many, never a unique one.
- Characteristic equation: , so .
- (C) True. is real symmetric, so it always has a full set of orthogonal eigenvectors; here the three eigenvalues are also distinct.
- (D) False. Positive definite needs every eigenvalue ; makes it only positive semi-definite. Directly, gives .
Answer: (B, C).
Trap: positive diagonal entries and a symmetric layout look like positive definiteness, so (D) is tempting. This is the stiffness matrix of three nodes joined by two springs with no support: it can move as a rigid body.
This exact matrix is the stiffness matrix of a free spring or bar chain with no support. A zero eigenvalue is a rigid body mode, which is why STAAD and ETABS report a singular stiffness matrix or instability error when a model is not restrained.
What are the eigenvalues of the symmetric matrix with rows (2, 1, 1), (1, 4, 1) and (1, 1, 2)?
What are the eigenvalues of the matrix ?
- (A)1, 2, 5
- (B)1, 3, 4
- (C)−5, 1, 2
- (D)−5, −1, 2
Answer: (A) 1, 2, 5 Official key: A
- Quick screen: the eigenvalues add up to the trace, , and multiply to the determinant.
- .
- The sum of the 2 by 2 principal minors is , so the characteristic equation is .
- satisfies it (), leaving .
- Eigenvalues 1, 2, 5: (A).
Trap: (B) also adds up to 8 but its product is 12, not 10. (C) and (D) contain negative values: by Gershgorin's theorem every eigenvalue lies within 2 of a diagonal entry (2 or 4), so none can be negative.
Eigenvalues of symmetric matrices are what STAAD Pro and ETABS compute in a modal analysis (natural frequencies from the stiffness and mass matrices) and what an engineer finds when getting principal stresses from a stress tensor. Symmetric stiffness matrices always give real eigenvalues.
If x is an eigenvector of A with eigenvalue lambda and also of B = A - 2I, what is its eigenvalue for B?
Suppose is an eigenvalue of matrix and is the corresponding eigenvector. Let also be an eigenvector of the matrix , where is the identity matrix. Then, the eigenvalue of corresponding to the eigenvector is equal to
- (A)
- (B)
- (C)
- (D)
Answer: (D) Official key: D
- The eigenpair means with .
- Apply to the same vector: .
- Since : .
- So is an eigenvector of with eigenvalue , option (D). In general keeps every eigenvector of and shifts every eigenvalue by .
- Check: has eigenvalues 3 and 1; has eigenvalues 1 and , each 2 less, with the same eigenvectors and .
Trap: (B) comes from moving the 2 to the wrong side. Subtracting from the matrix subtracts 2 from each eigenvalue, it does not scale it as in (C).
Shifting a matrix by a multiple of the identity is how the eigen solvers in STAAD.Pro, ETABS and SAP2000 target natural frequencies near a chosen value (shift-invert Lanczos): mode shapes stay the same and only the eigenvalues move, so the modes of interest converge quickly.
Eigenvalues of the 2 by 2 matrix with rows (6, 8) and (4, 2)
Pick the CORRECT eigen value(s) of the matrix [A] from the following choices.
- (A)10
- (B)4
- (C)-2
- (D)-10
Answer: (A, C) Official key: A;C
- Characteristic equation: .
- Expand: .
- Factor: , so and .
- Check: the sum equals the trace , and the product equals .
- The other options fail: gives and gives , not 0. Correct: (A) and (C).
Trap: (D) looks like the partner of 10, but the product of the eigenvalues must equal , and .
Eigenvalues of 2 by 2 matrices give principal stresses and their directions from a plane stress state, used in checking webs of plate girders and soil elements under footings, and the two natural frequencies of a two-storey shear building in modal analysis as per IS 1893.
For the symmetric 3x3 matrix P with rows (1 0 1), (0 1 0), (1 0 1), which statement is true?
Matrix is given as
The TRUE option is
- (A)Trace of is equal to the sum of the Eigen values of .
- (B) is an identity matrix.
- (C) is a skew-symmetric matrix.
- (D)Absolute magnitude of each Eigen value is 1.
Answer: (A) Trace of is equal to the sum of the Eigen values of . Official key: A
- Expanding along the middle row, , so the eigenvalues are 0, 1 and 2.
- (A) Trace and the sum of eigenvalues : TRUE. This holds for every square matrix, because the trace is the coefficient of in the characteristic polynomial.
- (B) : FALSE. is not orthogonal; it is even singular, .
- (C) A skew-symmetric matrix has and a zero diagonal, while this is symmetric (): FALSE.
- (D) The eigenvalues 0 and 2 do not have magnitude 1: FALSE.
Trap: the 0/1 pattern looks like a permutation matrix, whose eigenvalues all have magnitude 1 (option D). Here rows 1 and 3 are identical, so is singular and has the eigenvalue 0. The answer is (A).
Eigenvalues of a symmetric matrix are its principal values: for a stress tensor they are the principal stresses, and their sum equals the trace (the first stress invariant); for the stiffness and mass matrices of a building model they give the natural frequencies that STAAD.Pro or ETABS report in a modal analysis.
A matrix has eigenvalues 1, 2 and 3: what is the trace of its square?
Matrix has the eigenvalues 1, 2, and 3. The Trace of is
- (A)6
- (B)14
- (C)20
- (D)8
Answer: (B) 14 Official key: B
- If , then , so the eigenvalues of are .
- The trace of any square matrix equals the sum of its eigenvalues: , option (B) 14.
- Check with a triangular matrix that has eigenvalues 1, 2, 3: . The diagonal of is 1, 4, 9, trace 14, whatever the off-diagonal entries are.
Trap: (A) 6 is the trace of itself, not of , and squaring the trace (36) is also wrong because . Neither 20 nor 8 equals .
For a stress tensor the trace is the sum of principal stresses (the first invariant), and the trace of the squared tensor is the sum of squared principal stresses, the quantity behind octahedral shear stress and von Mises checks used in steel design and finite element post-processing.
Given the three eigenvalues of a 3x3 matrix A, what is the absolute value of its determinant?
The eigenvalues of
are , , and .
The absolute value of the determinant of matrix is ______ (rounded off to two decimal places).
Answer: 89.86 Official key: 89.00 to 91.00
- The determinant equals the product of the eigenvalues: .
- Absolute value: 89.86.
- Direct cofactor expansion along row 1: . The small difference from -89.86 comes from the eigenvalues being rounded to three decimals; both lie in the key range.
- Cross-check: the trace matches the sum of eigenvalues .
Trap: adding the eigenvalues gives 15.49 (the trace), not the determinant. Forgetting the absolute value leaves a negative number, which is outside the key range.
The determinant of a stiffness matrix equals the product of its eigenvalues, so a near-zero or negative value signals a mechanism or instability; this is what analysis programs like STAAD.Pro report as an instability or zero-stiffness warning when supports or member releases are wrong.