GATE Civil General Aptitude: quantitative questions solved (official CE1 and CE2 papers 2022-2025), part 2
Part 2 of 2 of the General Aptitude: Quantitative hub: 18 more official GATE CE questions on probability, counting and arrangements, ratios, percentages, money and time and data interpretation: tables and charts, each solved step by step and checked against the official answer key. Part 1 covers numbers, powers and algebra and geometry and mensuration.
Questions from the General Aptitude section of the official GATE CE papers, sets CE1 and CE2 of GATE 2022 (IIT Kharagpur), 2023 (IIT Kanpur), 2024 (IISc Bengaluru) and 2025 (IIT Roorkee); figures redrawn and solutions by Skill-Lync. · Updated 17 Nov 2026 · 18 of 37 questions on this page
3 x 3 grid with exactly one shaded cell in each row and each column: how many shadings?
In how many ways can cells in a grid be shaded, such that each row and each column have exactly one shaded cell? An example of one valid shading is shown.
- (A)2
- (B)9
- (C)3
- (D)6
Answer: (D) 6 Official key: D
- Choose the shaded cell row by row. Row 1 can use any of the 3 columns.
- Row 2 must avoid the column already used: 2 choices. Row 3 gets the one column left: 1 choice.
- Total : option (D). Each valid shading is a permutation of the columns. Checking all shadings of the grid directly finds exactly 6.
Trap: (option B) counts the cells, and 3 (option C) counts only the diagonal-type patterns. Remember that the column used in row 1 is no longer available to row 2.
Assigning each of n crews to exactly one of n work fronts, with no front left out, is the same count of n factorial ways, and it grows quickly. That is why construction scheduling uses assignment algorithms rather than listing every option.
4 red, 5 green and 6 blue balls: smallest number picked that guarantees two balls of the same colour?
There are 4 red, 5 green, and 6 blue balls inside a box. If number of balls are picked simultaneously, what is the smallest value of that guarantees there will be at least two balls of the same colour?
One cannot see the colour of the balls until they are picked.
- (A)4
- (B)15
- (C)5
- (D)2
Answer: (A) 4 Official key: A
- Look for the worst case: the largest pick with no colour repeated. With three colours that is one red, one green and one blue, so 3 balls can still be all different.
- A fourth ball must repeat one of the three colours (the pigeonhole principle: 4 balls, 3 colours).
- So the smallest is 4: option (A). Checking every possible colour split of balls confirms that 3 balls can all differ and every split of 4 has a repeat.
Trap: the counts 4, 5 and 6 are a distraction. They would matter for \u201ctwo balls of a given colour\u201d or \u201cone of each colour\u201d, but not for any two of the same colour. Option (D) 2 is only possible, not guaranteed.
Worst-case thinking of this kind is how sampling plans are set: to be sure a batch includes at least one sample from each of several sources, or that a fault repeats, an engineer counts the worst arrangement, not the likely one.
Three husband-wife pairs at a round table of six chairs, every husband next to his wife: how many arrangements?
Three husband-wife pairs are to be seated at a circular table that has six identical chairs. Seating arrangements are defined only by the relative position of the people. How many seating arrangements are possible such that every husband sits next to his wife?
- (A)16
- (B)4
- (C)120
- (D)720
Answer: (A) 16 Official key: A
- Glue each couple into one block. Three blocks around a circular table can be arranged in ways, because only relative positions count.
- Inside each block, the husband can sit on the wife\u2019s left or right: ways per couple, in all.
- Total : option (A).
- Check by brute force: of all seatings in fixed chairs, rotating each so that one husband is in chair 1 leaves 16 different arrangements with every couple side by side.
Trap: treating the blocks as a row gives , not an option; (C) 120 counts every circular seating with no condition at all.
Circular arrangement counting appears in layout problems such as fixing the order of bolts or anchor positions on a circular base plate, where rotations of the same pattern are the same arrangement. Counting questions like this are standard in PSU and core-company aptitude rounds.
Three pairs of identical twins at a round table of 8 chairs, each next to their twin: how many arrangements?
Three distinct sets of indistinguishable twins are to be seated at a circular table that has 8 identical chairs. Unique seating arrangements are defined by the relative positions of the people.
How many unique seating arrangements are possible such that each person is sitting next to their twin?
- (A)12
- (B)14
- (C)10
- (D)28
Answer: (A) 12 Official key: A
- Each pair must sit together, and the two twins are indistinguishable, so each pair is one block (AA, BB, CC) that can't be flipped into anything new.
- The 6 people use 6 of the 8 chairs, leaving 2 empty chairs, which are also identical to each other. Around the table there are 5 units: AA, BB, CC, E, E.
- Circular arrangements of 5 units: fix one block (say AA) to remove rotations, then arrange the other 4 units in a line: (divide by for the two identical empty chairs). That is 12, option (A).
- A brute-force check of all seatings of AABBCC and 2 empty chairs, keeping one per rotation, also gives 12.
Trap: forgetting that the two empty chairs are identical gives ; treating the table as a line of 8 gives 60. Neither is an option; the brute-force count settles it.
Counting arrangements with blocks and identical items is the logic behind planning permutations on site, such as how many ways precast segments, formwork sets or crews can be sequenced around a fixed loop when some units are interchangeable.
p:q = 1:2, q:r = 4:3, r:s = 4:5 and u is 50% more than s: what is p : u?
If
and is 50% more than , what is the ratio ?
- (A)2 : 15
- (B)16 : 15
- (C)1 : 5
- (D)16 : 45
Answer: (D) 16 : 45 Official key: D
- Put . Then , and .
- is 50% more than : .
- . Multiply both by 16: , (D).
Trap: stopping at forgets the 50%, and that ratio is not among the options; (B) 16 : 15 mixes the numerator of the right answer with that wrong denominator.
Chained ratios are how mix proportions are carried through a design: cement to water to fly ash to admixture are each fixed against the previous ingredient, and the site batch sheet needs every quantity against one base, usually 1 bag of cement.
P invests Rs 5000 a month for 6 months, Q Rs x for 8 months; Q gets 4/9 of the profit. Find x
P invested ₹ 5000 per month for 6 months of a year and Q invested ₹ per month for 8 months of the year in a partnership business. The profit is shared in proportion to the total investment made in that year.
If at the end of that investment year, Q receives of the total profit, what is the value of (in ₹)?
- (A)2500
- (B)3000
- (C)4687
- (D)8437
Answer: (B) 3000 Official key: B
- Total investments: P puts in ; Q puts in .
- Q's share is .
- Cross-multiply: , so and .
- Check: Q puts in , P ; . (B) 3000.
Trap: ignoring the months and solving gives ; swapping 6 and 8 months gives 5333. Neither is an option: the months are what make the 4/9 come out at 3000.
Joint ventures between contractors share profit and risk in proportion to capital and time, the same money-times-months weighting. Interest on a running account bill or mobilisation advance is computed the same way: amount multiplied by the period it is held.
x : y : z = 1/2 : 1/3 : 1/4. What is (x + z - y)/y?
.
What is the value of ?
- (A)0.75
- (B)1.25
- (C)2.25
- (D)3.25
Answer: (B) 1.25 Official key: B
- Clear the fractions by multiplying by 12: .
- Take , , . Then .
- : (B) 1.25. The common factor cancels, so the answer is the same for any actual values in this ratio.
Trap: dividing by instead of gives , and reading the ratio upside down (as ) gives . Neither is an option, but both are common slips.
Turning a ratio of fractions into whole numbers is routine in a mix design: a nominal mix written as 1 : 1.5 : 3 is scaled by a common factor to batch quantities, and only the ratios matter until a real quantity fixes the factor.
Investments 3:4:5 for six months, then raised by 10%, 15% and 20%: what is the profit ratio?
In a partnership business the monthly investment by three friends for the first six months is in the ratio 3 : 4 : 5. After six months, they had to increase their monthly investments by 10%, 15% and 20%, respectively, of their initial monthly investment. The new investment ratio was kept constant for the next six months.
What is the ratio of their shares in the total profit (in the same order) at the end of the year such that the share is proportional to their individual total investment over the year?
- (A)22 : 23 : 24
- (B)22 : 33 : 50
- (C)33 : 46 : 60
- (D)63 : 86 : 110
Answer: (D) 63 : 86 : 110 Official key: D
- Take monthly investments 3, 4 and 5 for the first six months.
- After the increase they are , and for the next six months.
- Yearly totals: , and .
- Divide by 0.6: , (D).
Trap: (C) 33 : 46 : 60 is only the second-half ratio ; it forgets the first six months. (A) 22 : 23 : 24 is only 110 : 115 : 120, the raised percentages without the base amounts; profit follows the total money over the whole year.
Time-weighted contributions decide shares in a consortium bid or a joint venture whose partners change their capital mid-project, and the same arithmetic gives the escalation-weighted value of work done before and after a price revision.
How many times do the second hand and minute hand cross between 12:05:00 and 12:55:00?
On a given day, how many times will the second-hand and the minute-hand of a clock cross each other during the clock time 12:05:00 hours to 12:55:00 hours?
- (A)51
- (B)49
- (C)50
- (D)55
Answer: (C) 50 Official key: C
- The second hand turns per second, the minute hand per second, so the second hand gains per second.
- Starting together at 12:00:00, they cross every s, i.e. at seconds.
- The window is s to s: runs from 5 ( s, just after 12:05:00) to 54 ( s, just before 12:55:00). That is crossings: option (C).
Trap: assuming one crossing exactly on every minute mark counts both 12:05 and 12:55 and gives 51. The crossings drift about 1 s later every minute: the first in the window is at 12:05:05 and the last at 12:54:55, so the count is 50.
Relative-speed thinking is the core of scheduling problems on site: two repeating cycles, such as a crane's lift cycle and the concrete truck arrivals, or two signal timings on a corridor, line up at a rate set by the difference of their speeds, not by either one.
A student divided p by q instead of multiplying; the error is 80 per cent. What is q?
A student was supposed to multiply a positive real number with another positive real number . Instead, the student divided by . If the percentage error in the student's answer is 80%, the value of is
- (A)5
- (B)
- (C)2
- (D)
Answer: (D) Official key: D
- Percentage error ; cancels.
- Set it to 80: , so and : option (D).
- Check the others: gives 75%, gives 50%, gives 96%.
Trap: solving correctly up to and then picking 5. The error is measured against the correct answer , not against the student's answer.
Percentage error relative to the true value is how results are judged in a materials lab: a cube strength, a sieve analysis or a surveyed closure is reported as error against the reference value, and using the wrong base changes whether the test passes.
Girls to boys in class VIII equals boys to girls in IX; 450 and 360 students, same girls. How many girls?
The ratio of the number of girls to boys in class VIII is the same as the ratio of the number of boys to girls in class IX. The total number of students (boys and girls) in classes VIII and IX is 450 and 360, respectively. If the number of girls in classes VIII and IX is the same, then the number of girls in each class is
- (A)150
- (B)200
- (C)250
- (D)175
Answer: (B) 200 Official key: B
- Let be the number of girls in each class. Class VIII has boys, class IX has boys.
- , so .
- , so and : option (B).
- Check: VIII has 200 girls and 250 boys (ratio 0.8); IX has 160 boys and 200 girls (ratio 0.8).
Trap: 250 is the number of boys in class VIII, not girls; always put the answer back into both ratios.
Setting up one unknown from two linked ratios is everyday mix proportioning: water-cement and aggregate ratios, or the split of a traffic count between directions, are solved the same way and checked by substituting back.
Clock hands coincide when Rohit enters at about 1 PM and again when he leaves: minutes spent?
Rohit goes to a restaurant for lunch at about 1 PM. When he enters the restaurant, he notices that the hour and minute hands on the wall clock are exactly coinciding. After about an hour, when he leaves the restaurant, he notices that the clock hands are again exactly coinciding. How much time (in minutes) did Rohit spend at the restaurant?
- (A)
- (B)
- (C)
- (D)
Answer: (C) Official key: C
- The minute hand turns per minute and the hour hand per minute, so the minute hand gains every minute.
- Between two coincidences it must gain a full : minutes.
- The hands coincide at about 1:05:27 (that is minutes after 12:00) and next at about 2:10:55. Any two successive coincidences are the same interval apart.
- Time spent minutes, about 65 min 27 s: (C).
Trap: answering 60 minutes because the minute hand goes round once in an hour; in that hour the hour hand has also moved ahead, and the minute hand needs another minutes to catch it.
Clock problems are relative-speed problems: what matters is how fast one hand gains on the other. The same idea gives the time for a faster vehicle to close a gap on a highway in traffic studies, or how often two machines on a shared track line up.
40 W desk light, 10 hours a night for 180 days at Rs 7 per kWh: cost, and % increase for 2 more hours?
An electricity utility company charges ₹ 7 per kWh (kilo watt-hour). If a 40-watt desk light is left on for 10 hours each night for 180 days, what would be the cost of energy consumption? If the desk light is on for 2 more hours each night for the 180 days, what would be the percentage-increase in the cost of energy consumption?
- (A)₹ 604.8; 10%
- (B)₹ 504; 20%
- (C)₹ 604.8; 12%
- (D)₹ 720; 15%
Answer: (B) ₹ 504; 20% Official key: B
- Energy .
- Cost ₹ 504.
- With 12 hours a night the cost is ₹ 604.8, an increase of ₹ 100.8.
- Increase . Simpler: cost is proportional to hours, and 2 more hours on 10 is . Answer: (B) ₹ 504; 20%.
Trap: ₹ 604.8 in (A) and (C) is the cost with 12 hours, the new bill rather than the original one.
Watts times hours divided by 1000, times the tariff, is the same sum used to estimate site lighting, dewatering pump or batching plant power bills and in building energy audits; because cost is proportional to running hours, the percentage change follows the hours directly.
Potatoes at Rs 800 for 5 kg and Rs 800 for 4 kg, mixed and sold at Rs 192/kg for 8% profit: P:Q ratio?
A business person buys potatoes of two different varieties P and Q, mixes them in a certain ratio and sells them at ₹ 192 per kg.
The cost of the variety P is ₹ 800 for 5 kg.
The cost of the variety Q is ₹ 800 for 4 kg.
If the person gets 8% profit, what is the P:Q ratio (by weight)?
- (A)5:4
- (B)3:4
- (C)3:2
- (D)1:1
Answer: (A) 5:4 Official key: A
- Cost per kg: P ₹ 160, Q ₹ 200.
- Selling at ₹ 192 with 8% profit means the mixture costs ₹ 177.78 per kg.
- Alligation: P is below the mix cost and Q is above it. The weights are in the inverse ratio: P : Q .
- Check: , and . Answer: (A) 5:4.
Trap: taking the profit as 8% of the selling price (cost ) gives a ratio of about 1.40 : 1, not an option; profit is a percentage of cost.
Alligation is how two materials of different cost or grade are blended to hit a target: combining aggregates from two quarries to meet a grading or cost target, or blending two cements, uses the same inverse-distance ratio.
Frequency chart of marks 3 to 9: how do the mean, median and mode compare?
The above frequency chart shows the frequency distribution of marks obtained by a set of students in an exam.
| Marks | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|
| Frequency | 3 | 9 | 11 | 7 | 14 | 2 | 4 |
From the data presented above, which one of the following is CORRECT?
- (A)mean > mode > median
- (B)mode > median > mean
- (C)mode > mean > median
- (D)median > mode > mean
Answer: (B) mode > median > mean Official key: B
- Number of students: .
- Mean: , so the mean is .
- Median: with 50 values it is the average of the 25th and 26th. Cumulative frequencies 3, 12, 23, 30, ... : the 24th to 30th students all scored 6, so the median is 6.
- Mode: the tallest bar, 14 students at 7 marks.
- : mode median mean, (B).
Trap: taking the median as the middle of the marks axis (6 happens to be right here, but by luck) or as the middle bar height. The low tail of 3s and 4s pulls the mean below the median.
Mean, median and mode tell different stories about the same test data. Concrete cube results, traffic speed studies (the 85th percentile speed) and rainfall records are summarised this way, and a skewed set is exactly where the mean misleads.
Symmetric probability mass function with two tall peaks: how do the mean, median and mode compare?
Which one of the options can be inferred about the mean, median, and mode for the given probability distribution (i.e. probability mass function), , of a variable x?
- (A)mean median mode
- (B)mean median mode
- (C)mean median mode
- (D)mean mode median
Answer: (A) mean median mode Official key: A
- The bars are a mirror image about : the bar at is as tall as the bar at .
- For a distribution symmetric about 0, every is balanced by with the same probability, so the mean is 0.
- Half the probability lies on each side of 0, so the median is also 0. (The cumulative probability reaches exactly one half at , and the median is taken as the midpoint of and .)
- The mode is where is largest: the two tallest bars at and . Neither is 0.
- So mean = median mode: option (A). Reading the bar heights as tick units (total 80) gives mean 0, median 0 and modes -13 and 13.
Trap: \u201csymmetric so all three are equal\u201d holds only for a single-peaked symmetric distribution such as the normal curve. Here the centre is a valley between two peaks.
Bimodal data is common in civil engineering: axle loads on a highway mix empty and loaded trucks, and traffic speeds mix cars and heavy vehicles. Reporting only the mean of such data hides both peaks, so pavement design uses the full axle load spectrum.
Installed capacity and generation of T1 to T4 in 1000 h: which technology has the highest capacity factor?
The chart given below compares the Installed Capacity (MW) of four power generation technologies, T1, T2, T3, and T4, and their Electricity Generation (MWh) in a time of 1000 hours (h).
The Capacity Factor (CF) of a power generation technology is:
Which one of the given technologies has the highest Capacity Factor?
- (A)T1
- (B)T2
- (C)T3
- (D)T4
Answer: (A) T1 Official key: A
- Read the bars on the right axis (MW) and the crosses on the left axis (MWh): T1 20 MW, 10000 MWh; T2 30 MW, 9000 MWh; T3 15 MW, 7000 MWh; T4 40 MW, 12000 MWh.
- Capacity factors: T1 ; T2 ; T3 ; T4 .
- Highest: T1, option (A).
Trap: T4 has the tallest bar and the highest cross, but it also has the most capacity to fill; capacity factor is a ratio, so read both axes before comparing.
Capacity factor is the number that decides whether a hydro, solar or wind project is worth its civil works: dam and penstock costs are sized on installed capacity, but revenue comes from energy actually generated, so a project report always quotes both.
Cardiovascular mortality risk against steps per day: which statement about risk reduction is true?
The plot below shows the relationship between the mortality risk of cardiovascular disease and the number of steps a person walks per day. Based on the data, which one of the following options is true?
- (A)The risk reduction on increasing the steps/day from 0 to 10000 is less than the risk reduction on increasing the steps/day from 10000 to 20000.
- (B)The risk reduction on increasing the steps/day from 0 to 5000 is less than the risk reduction on increasing the steps/day from 15000 to 20000.
- (C)For any 5000 increment in steps/day the largest risk reduction occurs on going from 0 to 5000.
- (D)For any 5000 increment in steps/day the largest risk reduction occurs on going from 15000 to 20000.
Answer: (C) For any 5000 increment in steps/day the largest risk reduction occurs on going from 0 to 5000. Official key: C
- Read the curve: about 1.0 at 0 steps, 0.44 at 5000, 0.18 at 10000, 0.09 at 15000, 0.04 at 20000.
- Drops per 5000 steps: 0.56, 0.26, 0.09, 0.05. The curve falls steeply first and flattens out, so each later block of 5000 steps cuts less risk.
- (A): 0 to 10000 cuts about 0.82, far more than 0.14 from 10000 to 20000: false. (B): 0.56 against 0.05: false. (D): the last block gives the smallest drop: false.
- (C) is true: option (C).
Trap: (A) and (B) are written as 'less than', the reverse of what the curve shows; read the direction of each comparison before checking numbers.
Diminishing returns curves like this drive design decisions: extra compaction passes, extra curing days or extra cement give big gains at first and less each time, so specifications stop at the point where the next increment no longer pays.
GATE 2026 CE aptitude questions of this type
In GATE 2026 both CE sets shared their General Aptitude section with another paper of the same session: CE1 with Electrical (EE) and CE2 with Mechanical (ME). These 8 questions are word for word the CE ones and are solved on those pages:
- At how many points do y = x² and y = −x² − 2x − 1 intersect? GATE 2026 CE1 Q.3 = EE Q.3
- PQ is a diameter, angle ROS = 80°, PR and QS extended meet at T: angle RTS? GATE 2026 CE1 Q.7 = EE Q.7
- Triangle 6, rectangle 24, pentagon 120: the number in the hexagon? GATE 2026 CE1 Q.8 = EE Q.8
- Positive integers with P² = Q² + 13: the product PQ? GATE 2026 CE1 Q.10 = EE Q.10
- log₂ x + log√2 x = 48: what is x? GATE 2026 CE2 Q.2 = ME Q.2
- Four numbers: average 25, each at most 40, each at least 20. Which statements imply which? GATE 2026 CE2 Q.5 = ME Q.5
- 250 items sold at an average of Rs. 60 with S = 2T, R = 3T, Q = 4T: how many of product P? GATE 2026 CE2 Q.7 = ME Q.7
- A semicircular string K on a straight string P: both shortened by x so K becomes a full circle. x/l? GATE 2026 CE2 Q.8 = ME Q.8