Concrete Mix Design For M35 Grade Concrete With Fly Ash:- Grade of Concrete - M 35 Cement Type -OPC 43 Confirming IS 8112 Type of Mineral- Fly Ash Confirming IS 3812 Size of Aggregate-20mm  Minimum Cement Content -340 Kg/m^3 ( Is 456-2000) Exposure Condition. Water Cement Ratio 0.45 Is 456-2000 ( Exposure Condition…

Aim : To Draw the Given Geometries Using Different Coordinate Methods In Auto Cad. P1- Absolute Coordinate System Method:- Procedure :  Step-1: Type the Command for Line "L" Enter and Give the Coordinates (2,1) Step-2: Give the 2nd Point of Coordinates (2,7) ↵  Step-3: Give the 3rd Point of Coordinates…

Aim: To Draw a Cross Section of Footing  Procedure: Step-1 Create a Rectangle by Typing REC In Command Box Specify the Starting Corner Point. ( Its the Starting Point of Rectangle ) Click on Dimension in the Command Box Give the Dimensions In Command Box  Lenght = 1000 Units  Width = 200 Units Step-2 Give…

1. Aim:-  Creating a Geometry Using Chamfer  Procedure:- Step-1 Give the Commond of REC In the Command Bar  Select the specific Point  Select the Dimensions From Command Bar Give the Commond Length 10 Units  Give the Commond of Width 15 Units  Step-2 Give the Commond of Chamfer In the Command…

Q.1 Aim:- To Sketch the Given Residential Layout Using Auto Cad Procedure: Step 1: Type Units In Command Bar Press Enter Select the Types as Engineering and Scale as Inches Click OK Give the Command of Limits Press Enter Lower Limit as 0,0 and Upper Limit as 100,100, Press Enter Give the Command of X line In Command Bar…

Q.1 Aim: To Create Column Schedule as Shown In the Figure Using Auto Cad Procedure: Give the Command of Rectangle Rec Enter Specify the StartingPoint and Give the Length and Breadth Press Enter Press Esc., Select the Object and Give the Command of Copy and Press Enter Select the Left Bottom Corner Point Select the Array…

Aim:- Draw the elevation and details of a wardrobe Using Auto Cad  Note:- All the Dimensiones are in mm Procedcure:- Give the Command of Units press Enter Select the Units as Decimal and Insertion Scale in mm Click Ok Give the Command of XL enter Select V and Enter Place the Vertical Line Corner of the Work space…

  Q.1 Aim:- Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required. Procedure:- Give the Command of XL and Press Enter …

Aim:- To Draw the Floor Plan, Elevation and Section of Residential Buildings Using the Various Commands in Auto Cad Procedure:- Give the Command of Units and Press Enter Select to Architectural and Inches press Enter Give the Command of XLine Enter Select the Horizontal in Command Bar Specify the Point Give the Command…

1. Aim:-  To Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock,…

1. Aim: - Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. Procedure: - Select the Layer Properties From the Ribbon Tab Create a New Layers As Per…

  1. Aim: - To Create a Layout of a Plan and section A of the Project in the Challenge Introduction: - Use of Template in the Layout in Order Create Paper Print of the Project. IN Order to Plot the Project Drawings in Layout, Use of View Ports and Creating   Views are Essential To Define the View Through…

Q.1 Aim: - To Create a 3D Furniture element Using Auto Cad Procedure: - Type Units in the Command Prompt and Press enter in the Unit Tab Select the Type as “architectural” and Insertion Scale as “Inches” Click Ok Type Line in Command Bar and Press Enter Specify the Starting Point Using the Cursor…

Q.1   Aim: - Create a 3D Isometric View of the building with plan and elevation given Introduction: - A Plan View of Wall of Two elevations Views of Windows on Both Sides are Given and They are to  be Converted in to a 3D Model. 2 Window Openings in Both Sides are Given with Details Regarding the Frame Dimensions,…

Aim: - To Create a 3 dimensional model of the residential building with a rendered view. Procedure: -  Give the Command of XL and Press Enter  Select the V From the Command Bar and Specify the Corner of Work Space  Press Enter  Give the Command of XL and Press Enter  Select the H From the Command…

1. Aim: - From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately Procedure: - Open the Revit Software Select the New Option Select the template as per Requirement Save the Project as Week Challenge-1 Press Ok Result: -   2. Aim: - Save the…

1.What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. BIM: - BIM is a Building Information Modelling It’s a Concept Created by Auto Desk Revit Helps in Achieving BIM as a Process Features In BIM: - BIM is Divided in to 2 types Co Ordination 2. Computations Co Ordinations: - Co…

1.   Aim: - To Create Floor and Assigning Material and Thickness Using Property Browser Create a Layout in the Ground Floor Level, Align it With Grids Procedure: - Open the Week 2 Assignment and By Using File Option save as the Project as Week 3 Press Ok Go to Architectural tab and Click on Floor and Select the Floor…

1. Aim: - To Model a Celling From Architecture Tab Above the Walls at First Floor Level Procedure: - Open the New Project Go to Architectural Tab and Select the Celling then Select Sketch Celling and Then Select Pick Line Option and Choose the Boundary Walls  Select the Celling Type as Compound Plain Celling Plain…

1. A Model Building Code Organization is a Set of Building Codes that are Developed and Maintained by standards Organization. This standards Organization Operates Independently of the Jurisdiction or area in which the Building Code Standards are Being developed. Local Governments or Councils In Which the Building Code…

1. Aim: - Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project Procedure: - Open the Revit Software and Create a New Project Using the Architectural Template Go to Architectural tab Select Grid Option Draw the Grid Lines Go to Manage tab Select the Specify…

1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School Ans: - Multi Unit Residential Apartment  2) Assume reasonable assumptions for geographic…

1) HVAC System: - HVAC (Heating, Ventilation, and Air Conditioning) System is Designed to Achieve Environmental Requirements of the Comfort of Occupants Process. HVAC System are Essential in the Modeling of Building: - HVAC System Control the Overall Climate in the Building, By Making Proper adjustments whenever we Experience…

1) The shortcut keys in Revit discussed in class to complete the following tasks and listed below: - Using 3D model create a section box -BX To create similar doors and windows in a floor plan layout-CS To reduce the thickness of lines visible in plan views-TL To apply override settings to a floor in the model section…

1) Aim: - Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. Procedure: - Open the Revit Software Create a New Architectural Template File  Select the Dynamo By Using Manage Tab Now double Click on the Dynamo Screen, the Code Block Will be Visible Now insert the…

1) Aim: - Export the Revit architecture and structure model to Navisworks Cache file Procedure: - Open the Revit Software and Open the Architectural Model  Now Click on file Option Now Export Model as DXF File  Now Open the Navis Work Open the Menu  Repeat the Same Procedure for Architectural Template Result:…

1. A) Flexural Failure: - The concrete portions have ruptured at the bottom in this figure, which means this can be formed due to flexural failure of the beam The flexural strength is also known as the modulus of rupture, which represents the highest stress experienced with in the material as its moment of rupture Under…

A: - Symmetry: - The Given Layout of the Framing Plan is Symmetric. it’s a Symmetrical well Distributed in Plan Layout structural Elements is Appropriate to achieve Uniformity. This Tends to Reduce the Horizontal Displacements in both two horizontal displacements in both two orthogonal horizontal directions Its also…

1.A: - Case: 1 Case: 2 Case: 3       1.Shear Walls are Plced Syommetrically Uniform Load Carryingand Good Shrinkage Control  1.Shear Walls are Plced Syommetrically Uniform Load Carryingand Good Shrinkage Control Compare to Other Strctures   1.Shear Walls are Placed Unsymeetrically, The Shirinkage…

Aim: To Model a 25 Storey on ETABS With structural Properties as Specified Below. Ground Floor or Plinth Floor Level Can Be Taken at a Height of 1.5 Meters from the base. Each of the Successive 25 storeys has a storey height of 3 Metres Structural Element Sizes: Beams: 300 × 400 mm Columns: 800 × 800 mm Slab:…

  First open the ETABS software. Next click on the file option at the left side top corner and select the new model,as shown below. After selecting the new model the new tab opens in that tab w have to select 'Use Built-in settings with' option as shown below. Ater seting the model intialization the templates tab…

AIM:- To design the beams in detail from the Etabs 2019.  To provide details of longitudinal and shear reinforcement for the  given two continuous beams.  To calculate the value of maximum shear force in any one of the span in the continuous beams. INTRODUCTION:- Beams are horizontal structural elements…

Aim: - un the analysis and design the RCC Moment Resisting Frame of the Given E Tabs file and to Provide details of Longitudinal Reinforcement for the two Columns 3A & 3B for Foundational Level to terrace Level. Sketch the column cross sectional & elevation details or draft it using auto Cad software. Show shear…

Aim: - Run the analysis and design the RCC shear walls (show in the etabs model). Extract values of longitudinal steel ratio, boundary element length and shear reinforcing ratio from the design results. Provide cross sectional steel arrangement of the shear wall from its base up to terrace, in compliance with provisions…

Aim:- To Design a Structural model on the basis of Provisions from IS 1893and IS 13920 in Seismic Zone 5. To run a Model Response Spectrum analysis and Check analysis results of the Etabs Model for Inter storey Drift Requirements Vertical & Planar Irregularities, Minimum Shear Wall Requirements Maximum axial Load ratio…

Aim :- Design a square footing for a column size of 400x400. The compression axial load for the load combination of (1.5 DL + 1.5 LL) is 2000 KN. The safe soil bearing capacity is 150 KN/m2 at a depth of 2 metres below E.G.L. Participants are free to go for either a tapered or stepped footing. Besides the total axial load,…

Aim:-  Model the isolated footing provided in week 11 challenge on SAFE. Analyze and design it to verify the size, depth and steel provided as per calculations   Intro:- (Slab analysis by the finite element Method )Is the Best tool for Designing of Concrete Slabs & Foundations  Safe Provides Easiness…

Design and analysis of a Hostel Building at Guwahati, Assam In this project, participants will get to experience the entire design process from modelling, analysis, design, and preparation of construction drawings. The architectural drawings of a G+3 RCC building is provided. The following information on the building…

Aim: - Summarize the user interface in TSD with the for the following items: - Project Workspace – How to access and usage  Scene Content – Demonstrate the use of scene content Create two scene views Loading drop list- How to access  Properties windows – how to access and usage Project Workspace:…