Explanation of the code:  starting programm by useing comments started by basic command(i.e clc,close all clear all..) to make sure command and workspace has no date providing the data required to exuctue the programm calcilations. provind the length valves for links or robatic arms i.e l1and l2 and theta valve using…

Step wise Expalntion  of the code strarted by clc,close all,clear all command Givien inputs required i.e  gravity ,mass,length,and acceration Provide time intervals for the pedulum wrote the function programmand second order code plot the tme and displacement for pendulam operation used the for loop command to…

 code for genetic algorthim for gobel max : clear all close all clc  x = linspace(0,0.6,150); y = linspace(0,0.6,150); numcase  = 50;   % creating the stalagmite    [xx yy] = meshgrid(x,y); for i = 1:length(x) for j = 1:length(y) inputvector(1) = xx(i,j ); inputvector(2) = yy(i,j); f(i,j) = stagalmite(inputvector); end…

Explanation of the code: satring  with clear all and close all and clc commande earse all the previous data. After that giving the inputs as mensioned the queation i.e p1,t1and p2 Ater that extracting the XSteam data file for water properties and temperture and sat vapour condition. Withe these inputs  inlet and Xsteam…

Q1. Making of Simlink model of Door bell using  Solenoid block.    In the Above  arrangement which the switch is closed the electromagnet receives electrical power from the battery and pulls the metal arm to hit in the bell produceing the sound. Here i'm  creating the to switch is closed for 2…

    MATLAb code  for parse the data from NASA thermodynamics data for various properties of the gas properties 1. To write a  function that extracts the 14 coefficients and calculates that enthalpy,entropy and specific heat for all the species in the thermodynamic data file i.e 'Thermo.dat'.  Where…

Q1. To implement the control logic of a washing machine using stateflow in simlink If power supplyis available,the syatem is activited If the water supply is not available,stop the process& indicate throught the LED Soaking time happens for next 20s & dryer runs 50s Afer  all the process have completed turn…

 To Study and analyze the BAJA all Terrain ATV model using simlink and compare between diferent models Objectives 1. To Prepare a techinal report explainig the function of the subsystem & block used for preparing the model. 2.To Explain in details  all the  differences between all the five models provided…

Q1.Chemical reactions ocurring at the anode and cathode of differnt types of lithium ion cells Batteries  Defination: Two or more eletrochemical cells,electrically interconnected,each of ehich contains two electrodes and an electrolyte.The redox(oxidation-reduction) reaction that ocurrs at these converts electrochemical…

 1.Simulate the 3 test cases from hardness dashboard and write a detailed repot on the result. 2.What s columb counting? Explain how BMS implements coulomb counting for SOC estimation? 1.Simulate the 3 test cases from hardness dashboard and write a detailed repot on the result.  Objectives: First thing we are downloading…

   Mechanical design of battery pack     Battery pack capacity: 18 kWh     Cell: ANR26650M1-B      Prepare a detailed battery pack drawing along with its enclosure. State your assumptions    EV battery pack design    The high voltage battery it is one…

For a 10 cell series lithium ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB. Component Requirement: Battery:   Description The Battery block represents a simple battery model. The block has four modeling…

 Deals with the development of a forward energy-based fuel consumption model of a conventional vehicle. Aim: Build Simulink model using blocks and complete the vehicle model. Writting scripts in MATLAB to load all the variables required for running the Simulink model. Tabulate the fuel economy numbers (kmpl) for UDDS and…

1. Benchmark with presently available cars in the market for the following case. Mr. D.S. Pughazhyendhii is a married man who lives in Bangalore which is a highly crowded city. His Family comprises five members including his wife, a five-year-old boy, his father, and his mother. He visits his native place Madurai which…

Write one page about Underbody coating and its purposes. Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted on when the car is just out of the dealership and is clean.  The main purpose of undercoating is to check…

  Class A surface: It is input surface. It is the visible aesthetic surface which have curvature and tangency alignment to ideal aesthetical reflection quality of any automotive component. Class A surface refers to those surfaces which are visible It is a required where aesthetics has a significant contribution. Class…

Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Take the Thickness of the component to be 2.5 mm  …

Create the Coin Holder Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Take the Thickness of the component to be 2.5 mm  …

Create the Bumper Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Take the Thickness of the component to be 3 mm Introduction: A bumper…

Create the Core and cavity blocks for the switch bezel designed in the earlier challenge.   Screenshots of the Draft analysis report for both the switch bezel plastic component  Before we design the core and cavity, we should perform a draft analysis on the solid part body of the switch bezel.  1.Creating…

  Attachment Feature Creation (Ribs & Screw Boss) AIM: To Create the Door Handle Component from the given Class-A surface. To Create the tooling axis for the given Class-A Surface meeting the requirements of the draft angle. To Attach B side Features in the component. To perform the Draft analysis on the…

DESIGN AND ASSEMBLY OF QUICK RETURN MECHANISM: QUICK RETURN MECHANISM A quick retum mechanism is an apparatus to produce a reciprocating motion in which the time taken for travel in retum stroke is less than in the forward stroke. It is driven by a circular motion source (typically a motor of some sort) and uses a system…

Create the Door Trim Lower Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.       So that  firstly we have to Class…

Create the Dog House for the Door Trim considering the design rules mentioned in the video. Consider the thickness of the part to be 2.5 mm. "C" is where the doghouse contacts the backside of the surface  Doghouse wall thickness at the intersection of the part wall ( C ) should be 40% or less than the…

A pillar Design with Master Section From above A piller master section taken as the input and created the Class A ,Class B and Class C surface  and  engineering features with indicated in master section. Now  as input of class A surface we have to check  condition of class A i.e if there is any patche so firstly we have…

AIM:  Download following connectors & Connector clip cad data from given link & define it as Electrical Connector using Electrical Part design Workbench. Define all the necessary properties to Connectors & Clip.   Deutsch DT06 – 08SA ( https://www.te.com/usa-en/product-DT06-08SA.html) Tyco 174357-2 (https://www.te.com/usa-en/product-2-174357-2.html?source=header-match)…

Q1. Download following cad data & define it as Electrical support using Electrical Part design Workbench. Define all the necessary properties. P clamp Note: if you face any issue with point definition, point selection, Right-click on the point definition window and use the reset option. Download the P clamp from the above…

Q1. Route the following harness layout in Electrical workbench. Make assumption for harness bundle diameters. Use Following connectors as shown in layout diagram. Add protective covering on all branches connected to DT06-2S & DT06-4S connectors. Keep end extremity at 30mm (from connectors end)   Download connector…

AIM To create a door interior part from the inputs of class A surface along with master section by following the design rules followed in tier 1 and OEM industries in catia v5 INPUT OF CLASS A SURFACE Since the input class A surface is containing four different parts(class A). So class B and C for all the surface has been…

Aim : 1.Design Hood outer panel, inner panel and the necessary reinforcements by following the Master section mentioned with the design parameter  2.Submit an assembly of Hood inner panel, outer panel, latch, hinge and the reinforcements. 3.A detailed report about the Hood Design which includes a detailed explanation about…

Use the Section from your Hood design and calculate the Section Modulus using the formula  S = I/y  Where,  S = Section Modulus I = Moment of Inertia y = distance between the neutral axis and the extreme end of the object  WHAT IS SECTION MODULUS? Section modulus is defined as the ratio of moment of…

Fender Fender is a part of an automobile, motorcycle or other vehicle body that frames a wheel well (the fender underside). Its primary purpose is to prevent sand, mud, rocks, liquids, and other road spray from being thrown into the air by the rotating tire. Fenders are typically rigid and can be damaged by contact with…

Introduction: An automobile roof is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements. Under the styling surface that is seen from the outside, many other structures under the roof contribute to its strength and stability.…

FENDER : Fender is the American English term for the part of an automobile, motorcycle or other vehicle body that frames a wheel well (the fender underside). Its primary purpose is to prevent sand, mud, rocks, liquids, and other road spray from being thrown into the air by the rotating tire. Fenders are typically rigid…

1.Title of the Project MODELLING OF SHEET METAL CASING 2.Objective Design a sheet metal casing using Siemens NX Sheetmetal application. 3.Introduction The sheet metal application provides an environment for the design of sheet metal parts used in machinery, automotive and aerospace application etc. Enclosures, brackets…