Solving Second-Order ODEs   Aim: Solving Second-order differential equation using Matlab. Objective:  …

                                                   GENETIC ALGORITHM   AIM: A code in MATLAB to optimize the stalagmite function and find the global maxima of the function.…

                                                        PARSING NASA THERMODYNAMIC DATA   AIM: Parsing the NASA thermodynamic data given and calculate molecular data.…

                                                            RANKINE CYCLE SIMULATOR   AIM: Create a Rankine Cycle Simulator using OCTAVE/MATLAB. OBJECTIVE: Create…

                    Deriving 4th Order Approximation Of A 2nd Order Derivative Using Taylor Table Method   AIM: Write a program in Matlab to evaluate the second-order derivative of the analytical function exp(x)*cos(x) and compare it with the…

                             Midterm project - Solving the steady and unsteady 2D heat conduction problem   AIM: Solve the 2D heat conduction equation by using the point iterative techniques that were taught in the class. OBJECTIVE: …

                Simulation Of A 1D Super-Sonic Nozzle Flow Simulation Using Macormack Method   AIM:  To simulate the isentropic flow through a quasi 1D subsonic-supersonic nozzle by both the conservation and non-conservation forms of the governing equations and solve…

                                          Simulation Of A Backward-Facing Step In OpenFOAM   AIM: to simulate an incompressible-laminar-viscous flow through the backward-facing step geometry. OBJECTIVE: …

                                                                  FVM Literature Review   AIM: To study and understand the  Finite Volume…

                                                  Simulation Of Flow Through A Pipe In OpenFoam   AIM: To simulate an axisymmetric flow by applying the wedge boundary condition. OBJECTIVE: …

Validation Studies Of Symmetry BC vs Wedge BC In OpenFOAM vs Analytical H.P Equation   AIM: to simulate the given angles using both symmetry and wedge boundary conditions and validate them with HP equations like you did in the week 11 challenge. OBJECTIVE:  simulation for the below-mentioned angles…

                                                 ADIABATIC FLAME TEMPERATURE CALCULATION   AIM: To write a program in python to see the variation in the adiabatic flame temperature. OBJECTIVE:…

                                                       HANDLING MIXTURES WITH CANTERA   AIM: To work with the Quantity class of Cantera to create various mixtures and explain…

                                          COMBUSTION EFFICIENCY CALCULATION AFTER PREHEATING        AIM: To Find the Combustion Efficiency of the Furnace with respect to Preheating. OBJECTIVE:…

                                             COMPACT NOTATION DERIVATION FOR A SIMPLE MECHANISM      AIM: to derive the reaction rate ODEs of a simple reaction mechanism using compact…

                                                        LITERATURE REVIEW: ODE STABILITY   AIM: A literature review is a great way to assimilate a large amount of data…

                                                     MULTIVARIATE NEWTON RAPHSON SOLVER   AIM: To write a code and solve the equation given by multivariate Newton Raphson solver.…

                                                            AUTO IGNITION USING CANTERA   AIM:  to simulate the Auto Ignition Time for Methane and observe…

                                                    SENSITIVITY ANALYSIS ASSIGNMENT   AIM: to write a code that takes all the reactions from the GRI mechanism and calculates the…

                                                                            MIXING TEE   AIM: to set up steady-state…

                                                                 FLOW OVER A CYLINDER   AIM: Simulate the flow over a cylinder and explain the phenomenon…

                                           EXTERNAL FLOW SIMULATION OVER A AHMED BODY   AIM: To run external flow simulations over an Ahmed body with the given conditions OBJECTIVE:  Answering the…

                                                                  CHT ANALYSIS ON EXHAUST PORT   AIM: To simulate Conjugate Heat Transfer Analysis…

                                                            RAYLEIGH TAYLOR INSTABILITY   AIM: To conduct the Rayleigh Taylor CFD simulation. OBJECTIVE:  What…

                                                         CHT ANALYSIS ON A GRAPHICS CARD   AIM: Perform a steady-state conjugate heat transfer analysis on a model of…

                                                      SIMULATION OF CYCLONE SEPARATOR    Aim:- To perform analysis on cyclone separator and calculate the separation efficiency…

                                                     PARAMETRIC STUDY ON GATE VALUE   AIM:  To perform a parametric study on the gate valve simulation by setting the opening…

                                                SIMULATING COMBUSTION OF NATURAL GAS   AIM: To perform a combustion simulation on the combustor model and plot the variation of the mass fraction…

                                                CHANNEL FLOW SIMULATION USING CONVERGE CFD   AIM: to run 3 channel flow simulations and compare the results between all the 3 simulations based…

                                                       FLOW OVER A BACKWARD FACING STEP   AIM: To simulate the flow over a backward-facing step with three different…

                                           PROJECT STEADY-STATE SIMULATION OF FLOW OVER A THROTTLE BODY   AIM: To run the simulation of a steady-state simulation of flow over a throttle body. OBJECTIVE:…

                                PROJECT TRANSIENT SIMULATION OF FLOW OVER A THROTTLE BODY   AIM: To run the simulation of a Transient simulation of flow over a throttle body. OBJECTIVE: Post-process the results and show pressure and…

                                                  PRANDTL MEYERSHOCK PROBLEM   AIM: To simulate the Prandtl Meyer Shock flow in Converge CFD OBJECTIVE: 1. Shock flow boundary conditions…

                                                 CONJUGATE HEAT TRANSFER SIMULATION   AIM: to simulate a Conjugate Heat transfer simulation across a pipe. OBJECTIVE: Baseline configuration Setup…

                                             LITERATURE REVIEW RANS DERIVATION AND ANALYSIS   AIM: To write a literature review RANS derivation and analysis. OBJECTIVE:  Apply Reynold's decomposition…

                                                                SHOCK TUBE SIMULATION PROJECT   AIM: To run Transient Flow simulation in a Shock Tube…

                                                                     FLOW OVER AN AIRFOIL   AIM: To perform steady and Transient simulation…

                               MODELING AND SIMULATION OF FLOW AROUND AN AHMED BODY AIM: The aim of this project is to model and simulate the flow over Ahmed body in converge. OBJECTIVE: Create the CAD model using your any CAD package…

                                              Geometry Simplification Of An Electronic Enclosure Assembly   AIM: To create the workflow in the Ansys workbench and import the CAD model into Spaceclaim.…

                                           Non-Conformal Meshing And Solving A Cold Plate Model   Aim: To perform the analysis for a two-heated plates model, cooled by water circulating inside the cold-plate…

                                                                     Multi Level Meshing   Aim: to improve the mesh resolution on and around the CAD objects by using the multi-level meshing technique. Objective : Without any modifications, the model results in about 700,000 elements. Note that this mesh count results from…

                                                            Forced Convection Analysis   Aim The objective of the project is to convert CAD shapes into Icepak primitive shapes in Spaceclaim & modify the components in Icepak & define the correct physics. Objective The total number of bodies in the CAD model is calculated.…

                                                          Setting up a model (Electronic enclosure)     Aim: To perform the flow and thermal simulation on a power board assembly. Objective:  The first step is to simplify and convert the given CAD geometry from SpaceClaim to ICEPK objects. After converting, we properly…

                                                      Setting Up A Model (Hanging Node)   Aim: To created the mesh model for assignment-2 that has been provided in week-5. The…

                                                      Mid-Term Project - Natural Convection        Aim: The objective of this challenge is to authenticate the increase in temperature for the low voltage control panel for the configuration in a statement. Perform a simulation in accordance with the regulations provided…

                                                                  Natural Convection-II   Aim : The aim of this challenge is to check the temperature increases in the configuration of the low voltage control panel with circuit breakers and bus bars. The impact of natural convection on circuit breakers and bus bars devices…

      Problem Description: An Icepak 3D fan object may sometimes behave differently from real fan behavior. Typically this is due to flow features like swirl and centrifugal spread resultant from the spinning fan rotor as well as the rotor blade geometry. In an Icepak fan-based setup, this swirl is estimated and calculated…

                                                             PCB Thermal Simulation   Aim: How to import trace layout of a typical PCB and solve two sample cases based on the trace layout information. How to use Model layers separately option for better accuracy. how to model resistive heating or Joule heating of the imported…

                                                                FSAE CAR PROJECT    AIM The aim is to simulate the Aerodynamics Behaviour of FSAE Car  OBJECTIVE ABCD Racing company is looking to perform Aero Simulations for their FSAE vehicle and they have hired you to do the job. The suspension team wants a detailed report…

                                                       Louver/Grille Characterization     Aim: To design and evaluate the flow domain comprising a portion of the Hexa grille…

                                         Final Project - Modelling And Analysis Of A Datacenter     Aim: The objective of this challenge is to model a replica of the data centre where high power distribution…

                                                          Exploring the GUI of GT-POWER   Aim: To explore the GUI of GT-Suite and understand different settings available…

                                                Basic Calibration of Single-cylinder SI-Engine   Aim: Basic Calibration of Single-cylinder SI-Engine. Objectives: 1. Run the case at 1800 rpm…

                                                    Basic Calibration of Single-cylinder CI-Engine   Aim: Basic Calibration of Single-cylinder CI-Engine Objective: 1. Compare SI vs CI and list down differences (assignment no 2-SI) 2. Comments on the following parameters BSFC Exhaust Temperature A/F ratios 3. Change MFB…