Revit and BIM course online
Skill-Lync teaches Revit in 5 online courses: two 12-week Revit and BIM courses and three 16 to 48-week civil programs that include Revit. Here they all are in one table with fees, duration and projects, and which one fits your stage.
As of 16 Nov 2026: 5 courses · ₹40,000 to ₹2,75,000 · Fees are the list price on each course page, inclusive of all charges
Every Skill-Lync course that teaches Revit
| Course | Level | Duration | Projects | Fee |
|---|---|---|---|---|
| BIM in AEC Industry using Revit | Short course | 12 weeks | 2 | ₹40,000 |
| Drafting and Design Using Revit | Short course | 12 weeks | 4 | ₹40,000 |
| Pre-Graduate Program in High-rise Building Design | Pre-graduate program | 16 weeks | 10 | ₹1,50,000 · EMI from ₹7,841/mo |
| Post Graduate Program in Buildings - Engineering Design and Project management | PG program | 48 weeks | 16 | ₹2,75,000 · EMI from ₹14,375/mo |
| Post Graduate Program in High-Rise Building Design & Analysis | PG program | 48 weeks | 24 | ₹2,75,000 · EMI from ₹14,375/mo |
Projects is the number of industry projects listed on the course page. Programs also include the courses' smaller assignments. EMI figures are the lowest monthly plan shown on the course page.
Which one should you pick?
- You want BIM across every discipline. BIM in AEC Industry using Revit (12 weeks, ₹40,000, 18 h of video) gives architecture, structure and MEP a module each, plus schedules, BIM 360 and Dynamo. Its main project is a BIM model of a residential building of at least 7 storeys.
- You want more Revit hours, Indian codes and clash detection. Drafting and Design Using Revit (12 weeks, ₹40,000, 31 h, 4 projects) goes deeper on modelling to the National Building Code, two weeks of Dynamo and a week of Navisworks clash detection. It is also the Revit course inside all three programs below.
- Do not buy both short courses. They overlap on Revit basics, schedules, BIM 360 and Dynamo. Pick by whether you need MEP modelling (BIM in AEC) or Navisworks and more practice hours (Drafting and Design).
- You want Revit plus structural design. The Pre-Graduate Program in High-rise Building Design (16 weeks, 10 projects) adds the ETABS and SAFE seismic course, industrial STAAD.Pro and Primavera. The Post Graduate Program in High-Rise Building Design & Analysis (48 weeks, 11 courses) adds AutoCAD, composite structures, Tekla and steel connections.
- You want Revit plus project management. The Post Graduate Program in Buildings - Engineering Design and Project Management (48 weeks, 7 courses) pairs the Revit course with ETABS, STAAD.Pro, Primavera P6, tensile structures, Rhino and Grasshopper energy analysis and construction management fundamentals.
What is Revit?
Revit is Autodesk's building information modelling (BIM) software. In AutoCAD you draw lines that look like a wall. In Revit you place a wall: an object that knows its height, thickness, material, fire rating and which floor it sits on. Plans, sections, elevations and 3D views are all live views of that one model, so moving a wall in the plan moves it everywhere.
Because the model holds real objects, it can count them. Take a 230 mm brick wall, 4.0 m long and 3.0 m high: a Revit wall schedule reports 12.00 m² of wall and 2.76 m³ of brickwork. Raise the wall to 3.2 m and the schedule updates by itself to 12.80 m² and 2.944 m³. Do that for every wall, slab, beam, door and duct in a building and you have quantities for the estimate without counting by hand.
BIM is the process around the software. Architects, structural engineers and MEP (mechanical, electrical, plumbing) engineers each build their part of the model, the models are linked, and tools like Navisworks find the clashes, such as a duct running through a beam, before anyone pours concrete. Dynamo, Revit's visual scripting tool, automates repetitive modelling and builds shapes, like a twisting tower, that are hard to draw by hand.
What a Revit course covers
- Revit basics and documentation. Interface, templates, levels and grids, materials and families; tags, dimensions, legends, sheets and layouts, and a walkthrough video of the model.
- Architecture, structure and MEP in one model. BIM in AEC Industry has a week each on structural elements (columns, beams, slabs, foundations, reinforcement, stairs and trusses) and on HVAC, plumbing and electrical modelling. Drafting and Design covers structural elements and the basics of HVAC design.
- Quantities from the model. Revit schedules, multi-category and key schedules, calculated parameters and model-based estimation; in Drafting and Design, a schedule and cost report rendered as construction stages in Navisworks.
- Codes and collaboration. Modelling to the National Building Code of India (Drafting and Design), shared coordinates, linked files and copy/monitor, phase filters, and cloud collaboration on BIM 360.
- Dynamo and Navisworks. Visual scripting with Dynamo (one week in BIM in AEC, two weeks in Drafting and Design, parametric shelters and a twisting tower), then Navisworks for model review, clash detection and 4D scheduling (Drafting and Design).
The courses in detail
BIM in AEC Industry using Revit
12-week BIM course for the AEC industry: building 3D Revit models, coordination and documentation, with 2 industry projects reviewed by mentors.
Projects include: 3D BIM model creation for a multi storied residential building using Revit; Project on creation of a multi storeyed twisting tower with maximum architectural features using dynamo and massing.
Tools: Revit
Drafting and Design Using Revit
12-week online course using Revit, with 4 industry projects. Learn how to develop stunning architectural designs with our expert-curated designing and…
Projects include: Building 3D Model from Concept Stage to Design using Revit; Creating Architectural and Structural Models, Detecting Clashes using Naviswork; Integrating Dynamo and Autodesk Revit to Design a 3D Model; Preparing a Schedule and Cost Estimation Report using Revit.
Tools: Revit
Pre-Graduate Program in High-rise Building Design
16-week online course, with 10 industry projects. A comprehensive program extensively designed for final year and pre-final year civil engineering students…
Projects include: Building 3D Model from Concept Stage to Design using Revit; Creating Architectural and Structural Models, Detecting Clashes using Naviswork; Integrating Dynamo and Autodesk Revit to Design a 3D Model; Preparing a Schedule and Cost Estimation Report using Revit.
Tools: ETABS, SAFE, Revit, STAAD.Pro, Primavera P6
Post Graduate Program in Buildings - Engineering Design and Project management
Want to Learn the design of building engineering using steel? Skill-Lync is providing the Post Graduate Program in Buildings - Engineering Design and Project management with job assistance.
Projects include: Building 3D Model from Concept Stage to Design using Revit; Creating Architectural and Structural Models, Detecting Clashes using Naviswork; Integrating Dynamo and Autodesk Revit to Design a 3D Model; Preparing a Schedule and Cost Estimation Report using Revit.
Tools: ETABS, SAFE, RFEM, Revit, STAAD.Pro, Rhino, Grasshopper, Primavera P6
Post Graduate Program in High-Rise Building Design & Analysis
The Structures of Buildings course is an online course that teaches you the fundamentals of structural engineering. Learn how buildings stand up, what causes them to fail, and how to design them to withstand almost anything.
Projects include: Calculation of Concrete Mix Design with and without Fly Ash for Both M35 and M50 Grade Concrete; Sketching a G+1 Residential Plan according to Vaastu Shastra and Calculation of Basic Loads; Design and Draft the Layout of a Residential Building and Prepare Architectural Floor Plans and Structural Drawings; Designing the 3D Model of a Building using AutoCAD 3D.
Tools: AutoCAD, ETABS, SAFE, Tekla Structural Designer, ComFlor, RFEM, STAAD.Pro, Revit, RAM Connections
Jobs after a Revit course
Typical job titles: BIM modeller, BIM engineer, BIM coordinator (usually after a few years), Revit architectural or structural modeller, and MEP BIM modeller. Revit jobs cluster in BIM outsourcing firms that model for US, UK, Middle East and Australian projects, in architecture and design consultancies, and in the design teams of real-estate developers and contractors.
From Skill-Lync's own placement records (as of 15 Nov 2026): job titles containing BIM or Revit, n = 62 placements, 60 with a salary: median starting salary 2.4 LPA, middle half between 2.0 and 3.0 LPA. The employers with the most of them were MIPL (7), Ebenus (6), and The BIM Company, Total Environment, Indovance, Green Ecomes Solutions and KPM (2 each).
Across all 367 civil placements in those records the median is also 2.4 LPA; for the role Structural / Civil Engineer (n = 94) it is 3.0 LPA. By job type, employer and city: civil engineer salary in India, and the latest offers on recent placements.
These are self-reported starting offers from learners who told us they were placed, 58 of the 62 BIM titles from 2021-2023, so treat them as a starting point and not as the whole market.
Free Revit tutorials
Start here before you pay for anything. These are written by Skill-Lync learners and engineers:
- 7 Reasons to Embrace Revit for Architectural Design
- A Stepwise Guide to Create a Revit Showcase
- BIM in Revit: Enhancing Design and Construction Processes
- Computational Design Tools: Exploring the Possibilities of CAD and BIM
- Introduction to BIM 2: Implementation and Career Opportunities
- Introductory Session to BIM - Know How BIM Fundamentals Help in Design
- Most Asked Revit BIM Interview Questions and Answers
- Revit Structure: Modeling and Analyzing Structural Elements
Before you pay
Revit is free while you study. Autodesk's Education plan gives eligible students and educators one year of free access to Revit (and Navisworks, AutoCAD and the rest), renewable while you stay eligible; your school is verified online (checked 16 Nov 2026). Use that copy for the course projects, not a cracked one.
Modelling is not design. Most BIM fresher jobs are modelling jobs, and they start low: a 2.4 LPA median in our records. Pay rises when you can coordinate disciplines, run clash detection and own quantities, or when Revit sits on top of a design skill such as RCC or MEP design. Plan for that second step before you enrol.
BIM 360 has a successor. Both short courses teach Autodesk BIM 360 for cloud collaboration. Autodesk's newer platform is Autodesk Construction Cloud (Autodesk Docs); BIM 360 projects still run and the workflow (shared models, versions, issues) carries over, but expect newer screens at work.
Basic Revit is cheaper elsewhere. Training centres teach Revit menus for a few thousand rupees. What the Skill-Lync fee pays for is a full building model reviewed by mentors, coordination with Navisworks and Dynamo, and placement support on the programs. Compare syllabus and projects, not only price.
Read the free tutorials first. The Revit BIM interview questions post shows what a BIM interview asks. If most of it is new to you, a short course is the right start; if you know it, a program adds more.
Revit course FAQs
What is the fee for a Revit course at Skill-Lync?
As of 16 Nov 2026: both Revit short courses are ₹40,000 each. The Pre-Graduate Program in High-rise Building Design is ₹1,50,000 (EMI from ₹7,841 a month) and the two PG programs are ₹2,75,000 (EMI from ₹14,375 a month). Fees are inclusive of all charges.
How long does it take to learn Revit?
The Revit short courses run 12 weeks each with 18 or 31 hours of video. You can model a simple house in Revit in a week or two; a coordinated multi-storey model with structure, MEP, schedules and clash detection is what the 12 weeks and the projects are for.
Is Revit free for students?
Yes, for eligible students. As of 16 Nov 2026 Autodesk's Education plan gives students and educators at accredited institutions one year of free access to Revit, renewable each year while they remain eligible. The licence is for learning, not commercial work.
Revit or AutoCAD: which should a civil engineer learn?
Both. AutoCAD is still used for 2D drawings and details on many Indian sites; Revit is what BIM jobs and international projects ask for. If you already know AutoCAD, learn Revit next. Skill-Lync's AutoCAD courses are on the AutoCAD hub.
Does a Revit course cover MEP?
BIM in AEC Industry using Revit has a week on MEP: HVAC, plumbing and electrical modelling and the MEP layout. Drafting and Design Using Revit covers the basics of HVAC design. Neither is a full MEP design course; they teach modelling MEP systems, not sizing them.
Who can join a Revit course?
Civil engineering and architecture students and graduates, diploma holders and working engineers who want to move into BIM. No prior Revit is needed; basic building drawing reading helps.