Tool axis creation procedure 1. Create a point and an axis system at the center of the hole. The hole is considered center since it lies at the center of the part and the part being symmetric. 2. Inorder to clear tooling path along Z direction, Use Intersect command on YZ plane with the Class A surface. Similarly if it…

Tool axis creation procedure 1. Create a point and an axis system by extracting the base surface of the Switch Bezel and taking it as the reference.  2. Inorder to clear tooling path along Y direction, Create a sketch with YZ plane and a point drawn on the extracted surface of the base as reference. Use Intersect…

Tooling Axis Creation 1. Extract a flat surface from the bumper. Create a point on the center of the extracted surface. Draw a normal line to the surface. This line is taken as the tooling axis for the bumper. Here it is convinient for us to create a tooling axis directly rather than following the bisecting method. Draft…

Tool axis Creation 1. Extract a surface as reference and create a point on the center of the extracted surface. 2. Inorder to clear tooling path along Y direction, Use Project 3D elements command on XY plane with the Class A surface. Consider the outer walls and extend the lines. 3. Create a bisecting line by choosing…