*1. Calculate the Concrete Mix Design for M35 grade concrete with fly ash            mix design is used to increase the workability of concrete .instead of nominal mix , mix design perform very accurate and increase strength and durable  to concret.. and with fly ash also increase workability…

aim:         Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual…

..

aim:      Creating a Floor plan, Footing detail and Isometric view using AutoCad    procedure:               floor flan    this floor plan is fully created by using some of tool like line , offset, arc, copy mirror etc .    the plan area…

Drafting of various geometries using Chamfer, Fillet tool in AutoCad aim:        to create the geomentry using some of the tools                Tools which are used for this diagram is          line,     …

1. Residence Plan: Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of the doors. aim :           to…

1. Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text. Hint: Use font name: romans.shx; Height: 8”, Justify: Left aim:      Create a column schedule as shown in the figure.…

1. Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document it. Also, assume dimensions, wherever needed. Note: All dimensions are in mm.   aim:to draw…

Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required. AIM:        Create the Plan and Sections…

1.        Plot Size: 60’x20’(18.3m x6m)         Orientation- Facing East         Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column,           …

aim:      Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and…

aim:       Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards.tools used:rec               …

aim:       Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. INTERFACE :                   3D BASIS tools were used :                          rec  …

 1 aim:       Create a 3D Isometric View of the building with plan and elevation given.tools were used :rec                          offset                        …

aim:      Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use…

aim:       Create a 3 dimensional model of the residential building with a rendered view.  area of residential: 40'*30'storey:G+1+parapett step 1:           draw the 2d plan using some autocadd tools ,tools were used :rec             …

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level aim:       to create ceiling in the existing week 3 project in architectuire tab procedure:           …

1) Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School       aim:              Select the…

1) Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. aim:       Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve.procedure :              *  first…

1) Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in classaim:      Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the…

Question 1: (a) aim:        What is the mode of failure or damage of the beams in the figure above? Are the damages repairable? Elaborateobjective :               we need to observe the picture and then want to find and found about how the failure will…

1. 1. Write the steps involved to upload a .std file through web mail?ans:        firsrt we need to open the staad window then we can see one of the option which was share so we have to click the share to get the mail option so if we want to send a model to someone means we can use this share opt to…

1. 1. How will you assign Circular section to column?ans:      what we did in the rectangular section as the same we going to did in this cirrcular section we gonna click define to create the circular section instead of rectangular section under properties tab            …