CAT PART-1 Isometric View- Front View- Side View- Top View- Draft Analysis report-   Draft Analysis- The draft analysis tool is to Check the draft. Using the draft analysis tool identifies the zones (using colour codes) and highlight the areas which deviate from the specified values along a defined draft direction.…

Tooling Axis- - Check the Connectivity of class A Surface: these can be done by creating boundaries or by joining command if there are any gaps or openings they will be easily visualized. -Visually analyse the best possible tooling axis. -the clearance checking along all the axis on the plane with the model and constructing…

Tooling Axis- - Check the Connectivity of class A Surface: these can be done by creating boundaries or by joining command if there are any gaps or openings they will be easily visualized. -Visually analyse the best possible tooling axis. -the clearance checking along all the axis on the plane with the model and constructing…

  Tooling Axis- - Check the Connectivity of class A Surface: these can be done by creating boundaries or by joining command if there are any gaps or openings they will be easily visualized. -Visually analyse the best possible tooling axis. -the clearance checking along all the axis on the plane with the model and constructing…

Tooling Axis- - Check the Connectivity of class A Surface: these can be done by creating boundaries or by joining command if there are any gaps or openings they will be easily visualized. -Visually analyse the best possible tooling axis. -the clearance checking along all the axis on the plane with the model and constructing…

Tooling Axis- - Check the Connectivity of class A Surface: these can be done by creating boundaries or by joining command if there are any gaps or openings they will be easily visualized. -Visually analyse the best possible tooling axis. -the clearance checking along all the axis on the plane with the model and constructing…

 Tooling Axis- - Check the Connectivity of class A Surface: these can be done by creating boundaries or by joining command if there are any gaps or openings they will be easily visualized. -Visually analyse the best possible tooling axis. -the clearance checking along all the axis on the plane with the model and constructing…

1-Identify each of the major elements in the above automotive wiring diagram.  Starter Battery Distributer Ammeter Generator Junction box Breaker Fuse Foot selector switch     2-Explain the purpose and working of any three elements briefly. Battery- purpose-Batteries are small essential components to…

Aim to - simulate the forward kinematics of a 2R Robotic Arm using Matlab. in this, we are going to write a program to solve the forward kinematic of a 2arm robotic arm manipulator. solution- calculate the position of link 1 calculate the position of link 2 the robot consists of 2 links 2 axis ponts and manipulator connected…

Aim- write the program to solve second order ODE using Matlab and aminate the oscillation of the simple pendulum. ODE= order differential equation. ODE is the extremely l important in engineering the describe a lot of important finominal and solving these ODEs can actually help us understand the systems   this equation…

Aim-Write a code in MATLAB to optimise the stalagmite function and find the global maxima of the function. Introduction to genetic algorithms- Genetic algorithms are a type of optimization algorithm, meaning they are used to find the maximum or minimum of a function. In this paper, we introduce, illustrate, and…

Aim-Write a code in Matlab to parse the NASA thermodynamic data file and then calculate the thermodynamic properties of various gas species   File Parsing- Parsing, syntax analysis, or syntactic analysis is the process of analyzing a string of symbols, either in natural language, computer languages or data structures,…

Aim- write a code to Simulate the Rankine cycle for the given input parameters using MATLAB. Rankine cycle- The Rankine cycle is an idealized thermodynamic cycle describing the process by which certain heat engines, such as steam turbines or reciprocating steam engines, allow mechanical work to be extracted from…

AIM - To create a solid body of a given Door Applique and to create the Locators and Heat Stakes on it as per design standards. INTRODUCTION - Heat Staking-                     Heat Staking is a pulsed-heat process to join two or more parts out of which one at least…

AIM- To create a Coin holder with ribs from the given A-class surface by adding a thickness of 2.5 mm to it and to create a screw boss and dog house as per the design standards. Tooling Axis- - Check the Connectivity of class A Surface: these can be done by creating boundaries or by joining command if there are any gaps…

AIM- To create a solid body of B pillar cover including ribs and locators using CATIA v5 tool using given A-class surface and master section and adding thickness. INTRODUCTION - B-Pillar The B-pillar is the central pillar of the car. This pillar is actually a sheet metal part that is welded in the BIW of the car. The B-pillar…

ASSEMBLY 1- SKETCH 1-   SKETCH 2-                                              SKETCH 3-   SKETCH 4-   SKETCH 5-   FINAL ASSEMBLY- DRAFT DRAWINGS-         ASSEMBLY 2-…

AIM:- 1. To Make a Simulink model of a Doorbell using a solenoid block.   Introduction:- Doorbell-The Electric Doorbell is a device having Mechanical & Electrical Component produce sound by pressing the button. When the switch is pressed, the circuit is completed, which allows current from the battery to flow…

Introduction- 10 Stages of Product life cycle of automotive Industry are 1. Concept sketch 2. Styling class A 3. Feasibility check 4. Concept validation 5. New Product Design 6. Product Development 7. Proto Build 8. Design Validation 9. Pilot Production 10. Mass production New Product Development CAD: this is the stage…

first- Aim- To implement control logic of a “washing machine” using State flow as per the inputs provided in power & water supply. concept- State-Flow: State-flow provides a graphical language that includes state transition diagrams, flow charts, state transition tables, and truth tables. MODEL-  …

AIM- To prepare a technical report explaining the BAJA All-Terrain Vehicle (ATV) model with Continuously Variable Transmission (CVT)  Theory- Continuous Variable Transmission (CVT)-  A continuously variable transmission (CVT) is an automatic transmission that can change seamlessly through a continuous range of gear ratios.…

FIRST- What is the difference between the mapped and dynamic models of engine, motor and generator? How can you change the model type? Powertrain Block set provides two types of combustion engine models- mapped  dynamic MAPPED ENGINE- Mapped engines represent macro engine behaviour as a set of lookup tables (brake…

CASE STUDY ON BENCHMARKING BENCHMARKING- Benchmarking involves a structured comparison between similar products, services or processes on some dimensions of performance. Benchmarking is a common practice among organizations and refers to a practice that allows a company to compare its own products, and its competitor's…

UNDERBODY COATING Underbody coating is a thick resilient coating applied to a car's underbody and it provides long term protection from corrosion. It also protects parts like internal body panels, frame rails and other inner cavities that are not physically accessible but are prone to corrosion.   AUTOMOTIVE UNDERCOATING…

AIM- To design the fender by following the input data and master sketch   FENDER Fender is the American English term for the part of an automobile, motorcycle or other vehicle body that frames a wheel well (the fender underside). Its primary purpose is to prevent sand, mud, rocks, liquids, and other roads spray from being…

Wheel Arch Wheel Arch is the semi-circular part of the fender positioned above the wheel of the vehicle. The design of the Wheel arch of a fender should be such that it must shield wheels and protect both passengers’ compartment and pedestrians from the projection of water, mud and stones.For the vehicle to have…

Aim- To calculate the section modulus of the designed hood and try out another way to increase the section modulus of the same hood by some means.   Theory- What is Section Modulus (S)? Section Modulus is the total moment resisted by the section to the stress in the extreme fibre. It gives an idea about how much load…

What is a Hood/Bonnet? The hood or bonnet is the hinged cover over the engine of motor vehicles. Hoods can open to allow access to the engine compartment for maintenance and repair. On front-engined cars, the hood may be hinged at either the front or the rear edge, or in earlier models, it may be split into two sections,…

  A dumb solid body of roof CAD model is provided for which following points to be designed and analysed are given below Extract the styling surface and for the given car roof styling and design the integral flanges and reinforcement, namely Ditch Area, Front Roof Rail, Rear Roof Rail, Centre Roof Rail, and Bow-Roofs.…

Objective- 1) To create a Back door design from a given class-A surface. 2) To provide reinforcements and emboss wherever required Introduction- A car door is a type of door opening, typically hinged on its front edge, but sometimes attached by other mechanisms such as tracks, for entering and exiting a vehicle. Doors…