-: SIMULATING CHANNEL FLOW USING CONVERGE CFD :- l. INTRODUCTION:-                       Simulation is the creation of a model that can be manipulated ,logicallyto decide how to the physical world works channel flow is an internal flow in which the confining wall changes the hydrodynamic…

                 AIM:- To write a program in matlab to simulate the forwward kinematics of a 2R Robotic ARM Objective:- 1.  write a program to simulate forward kinematics of a 2r robotic arm 2.To creat a movie /animation from the plots obtained from the program  …

                                                             -:SIMPLE PENDULUM:- AIM:-    solving a second order ordinary differential equation of simple pendulum…

                                                                  AIM:-GENETIC ALGORRTHM OBJECTIVE:-  To optimese the stalagmite function and find…

AIM:-To write a program in matlab to parse the NASA thermodynamic data file and then calculate the thermodynamic properties of various gas species.   OBJECTIVE:- . To write of function that extracts the 14co-efficiebt and calculates the enthalpy,entropy and specific heats for all species in the data file. . Calculating…

                                           AIM:- SIMULATE THE FLOW OVER BACKWARD FACING :-   OBJECTIVE:- . Run 3 simulation  . with 3 different base mesh sizes are  1. dx = 2e-3m     …

                                           AIM:- SIMULATE THE FLOW OVER BACKWARD FACING :-   OBJECTIVE:- . Run 3 simulation  . with 3 different base mesh sizes are  1. dx = 2e-3m              dy = 2e-3m              dz = 2e-3m  2. dx = 1.5e-3m           dy = 1.5e-3m           dz = 1.5e-3m 3. dx = 1.0e-3m           dy =…

                                           AIM:- SIMULATE THE FLOW OVER BACKWARD FACING :-   OBJECTIVE:- . Run 3 simulation  . with 3 different base mesh sizes are  1. dx = 2e-3m              dy = 2e-3m              dz = 2e-3m  2. dx = 1.5e-3m           dy = 1.5e-3m           dz = 1.5e-3m 3. dx = 1.0e-3m           dy =…

                                           AIM:- SIMULATE THE FLOW OVER BACKWARD FACING :-   OBJECTIVE:- . Run 3 simulation  . with 3 different base mesh sizes are  1. dx = 2e-3m              dy = 2e-3m              dz = 2e-3m  2. dx = 1.5e-3m           dy = 1.5e-3m           dz = 1.5e-3m 3. dx = 1.0e-3m           dy =…

                                 Project :- Transient simulation of flow over a throttle body   Aim:-   The aim of the project is to simulate the flow through a throttel body using transient simulation. the objective…

                                          Project:- State Simulation Of Flow Over A Throttle Body   Aim:-  To run simulation of a steady state simulation of flow over a throttel body.   Objective :- .…

                                                           AIM:- SHOCK TUBE SIMULATION   Objective :- . To set up a transient shock tube simulation . To plot the pressure…

                                                   AIM :- Surface preparation and Boundary Flagging    Objective :-  To make NO HYDRO case set up of an ic engine make boundary…

                                                         AIM :- Conjugate Heat Transfer Simulation Objective:  To simulate the Conjugate Heat Transfer over pipe using Super-…

                                                   AIM :-  Literature review - RANS derivation and analysis   Objective :- Apply Reynold’s decomposition to the NS equations and…

                                                         AIM:- Prandtl Meyer Shock Problem   Objectives:-  1. Shock flow boundary conditions  do a literature search…

                                                    Project 1 - FULL HYDRO case set up (PFI)   Engine Geometric Parameters:- Bore =0.086 m Stroke = 0.09 m Connecting rod length = 0.18…

                                                 AIM - PFI ENGINE AND DIESEL ENGINE:-   PFI Engine:- Q1. What is the Compression ratio for the engine ? (A)  The compression ratio is the ratio between the volume of the cylinder and combustion chamber in an internal combustion engine at their maximum and minimum values.…

                                          Project 2 - Emission characterization on a CAT3410 engine         AIM:- To simulate, analyze, and compare the significances of both omega…

                                                         Surface Meshing On a Pressure Valve   Aim :- For the given model, check for the geometrical errors and perform Topology…

                                                                 CFD meshing on Turbocharger   AIM :- For the given model, check for the geometrical errors…

                                                 Surface wrap on Automotive Assembly   AIM :- For the given models, check for the geometrical errors and delete surfaces which are unwanted for…

                                                                     CFD Meshing for BMW car   Objective :- Do topo cleanup for BMW car Do 2D meshing, check quality criterias Use hidden mode to check failed meshes on quality criteria Use reconstruct option to  view and  clear failed meshes Do 3D Meshing for car Create…

                                                                             AIM :-   Mixing Tee   Objective :–…

                                                      AIM :- CFD Meshing for Tesla Cyber Truck   Objective :- To Identifying & cleanup all the topological errors in the…

                                                             AIM :-CHT Analysis on Exhaust port Objective :- In this challenge,1. brief description of why and where…

                                                             AIM :-CHT Analysis on Exhaust port Objective :- In this challenge,1. brief description of why and where a CHT analysis is used.2. simulate both fluid flow and also the heat transfer to the solid i.e., CHT Analysis on an Exhaust port3.calculate the wall heat transfer…

                                                                    AIM:- Ahmed body     AHMED BODY :- Outer Encloser:- Right face is located…

                                                                    Rayleigh Taylor Instability   AIM: To conduct the Rayleigh Taylor CFD simulation…

                                                             AIM :-CHT Analysis on Exhaust port Objective :- In this challenge,1. brief description of why and where a CHT analysis is used.2. simulate both fluid flow and also the heat transfer to the solid i.e., CHT Analysis on an Exhaust port3.calculate the wall heat transfer…

                                                                    Rayleigh Taylor Instability   AIM: To conduct the Rayleigh Taylor CFD simulation OBJECTIVE: - What are some practical CFD models that have been based on the mathematical analysis of Rayleigh Taylor waves? In your own words, explain how these mathematical…

                                                                     Flow over a Cylinder   Aim: To Simulate the flow over a cylinder and explain…

  AIM:-  To simulate the flow through a cyclone separator and showing the results for the different particle size and for the different velocities. we have to run the simulation for the six cases   1).set the velocity constant to 3 m/s and do simulation for the varying size of the particle. 2).set the…

AIM :-   Parametric study on Gate valve. INTRODUCTION       A gate valve controls the media's flow by lifting the gate (open) and lowering the gate (closed). A gate valve's distinct feature is the straight-through unobstructed passageway, which induces minimal pressure loss over the valve. The…

          AIM:                To derive the fourth order approximations of a second order derivative using central differencing scheme, skewed right sided difference and skewed left sided difference with the…

AIM: -         Combustion Simulation of Natural gas inside a Burner using ANSYS FLUENT. Objective: - To study the combustion Phenomenology for the whole problem. To study the eddy dissipation model. To study the NOx and soot formation inside the burner. To pre-process the geometry for the simulation.…

                                                                  CHT Analysis on a Graphics card     Introduction: Computational fluid dynamics  and more specifically conjugate heat transfer (CHT) analysis can accurately predict heat transfer by simultaneous solving all the relevant solid and flow field heat transfer…

  Objective - To describe the need for interpolation schemes and flux limiters in FVM.     Basics In computational fluid dynamics there are 3 numerical method based solvers to solve the governing navier strokes equations these are: 1. Finite difference method 2. Finite element method 3. Finite volume…

OBJECTIVE. To simulate an axis-symmetric laminar flow through the constant cross-sectional of the pipe by applying the symmetry boundary condition. To simulating for the mentioned angles i.e for 10, 25, 45 degrees using both symmetry and wedge boundary conditions and validate them with HP equations. Theoretical…

The heat equation is a second order partial differential equation that describes how the distribution of some quantity such as heat evolves over time in a solid medium, as it spontaneously flows from place where it is higher towards places where it is lower. It is a special case of the diffusion equation. For a function T(x,y,z,t)�(�,�,�,�) of…

Aim: Simulating quasi 1-D supersonic flow through a converging diverging nozzle using MacCormack method Objective: Deducing the conservative and non-conservative forms of governing equations and implementing MacCormack method to solve the equations and comparing the results. Computing the steady state distribution…

                                                 Simulation of a backward facing step in OpenFOAM   INTRODUCTION Studying the flow behaviour through various structures is an important subject…

Objective: 1. To simulate a 2D incompressible laminar flow through a cylinder pipe in OpenFOAM.  2. Compare the velocity profile and maximum shear stress for the fully developed flow along with pressure drop with the Hagen Poiseuille's Equation. 3. To make arrangements to save computational resources and time by reducing…

                                                 Simulation of a backward facing step in OpenFOAM   INTRODUCTION Studying the flow behaviour through various structures is an important subject…

The heat equation is a second order partial differential equation that describes how the distribution of some quantity such as heat evolves over time in a solid medium, as it spontaneously flows from place where it is higher towards places where it is lower. It is a special case of the diffusion equation. For a function T(x,y,z,t)�(�,�,�,�) of…

Aim: Simulating quasi 1-D supersonic flow through a converging diverging nozzle using MacCormack method Objective: Deducing the conservative and non-conservative forms of governing equations and implementing MacCormack method to solve the equations and comparing the results. Computing the steady state distribution of fluid…

                                                 Simulation of a backward facing step in OpenFOAM   INTRODUCTION Studying the flow behaviour through various structures is an important subject for a CFD engineer.  When fluids flow through different geometries they exhibit different velocity, pressure and flow properties.…