Mix proportion of M35 grade concrete using fly ash as replacement of OPC . 1.Stipulations for proportioning a) Grade designation : M35. b) Type of cement : OPC 43 Grade conforming to IS 8112 c) Type of mineral admixture: Fly ash conforming to IS3812(part 1) d) Maximum nominal size of aggregate: 20mm e) Minimum cement content:…

answers are in the attached file i have sent.  

for p1 : using point cordinate system: give command line  specify first point (2,1)press enter then next point (2,7)then next point (8,7)then next point (8,6)then next point (3,6)then next point (3,2)then next point (8,2)then next point (8,1)then close. using rectangular or polar cordinate system: give command…

Aim: to create given drawings using autocad applications and mention the steps used . procedure: for c1: give command rectangle specify first corner point (0,0) then other corner point @(0.9,0.25) give command pline first point (0.2,0.25)then next point@(0,0.4)then next point@(0.05,0)then next point@(0,0.4)then next point@(0.4,0)then…

Aim: to create given drawings using autocad applications and mention the steps used . Procedure: for figure 1: select drawing unit decimal. give command pline. switch on polar tracking and restrict cursors to 45,90,135 angles.select any first point  give next point 2 in the 0 direction.then give next point 2.83…

AIM: sketch the drawings and give the steps used.     (1)   Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of…

AIM :  1. Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text. Hint: Use font name: romans.shx; Height: 8”, Justify: Left 2. Create a window schedule as shown in the figures: 3. Create the…

AIM:  1. To Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document it. Also, assume dimensions, wherever needed. Note: All dimensions are in mm. 2. Draw…

AIM:  Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required PROCEDURE: Figure 1 or floor plan of 1st,2nd and 3rd…

AIM: 1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock,…

AIM:  Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East    c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Bean, Footing Plan)…

AIM: 1. Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. 2. Create the layouts of the Kitchen and provide hatches pattern as shown. Also,…

AIM: 1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the layout.…

AIM: 1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. 2. Create the 3d Model of an Isolated footing as shown in Figure. 3. Create the 3D view of the AASTHO Type Girder. 4. Create a 3d Model of a  drop column with panel as shown in section and isometric view. 5.  Create…

AIM: 1. Create a 3D Isometric View of the building with plan and elevation given. 2. Create the 3D View of the Building Façade as given in the plan and elevation. Also, see the detail of the window. 3. Create the ismoteric 3d view of a stair with railing as shown in the plan and elevation. Assume the size of the…

AIM: Create a 3 dimensional model of the residential building with a rendered view.   PROCEDURE: copy the  floor plan and elevation from challenge 8 . turn all the layers off except wall select the wall area as boundary and make it a region  then extrude it 10' according to the height in the elevation.…

AIM: 1) From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately2) Save the new project file. Close and open using icons from file toolbar3) From the architecture/ structure toolbar familiarize with options to draw a wall. Create a rectangular layout…

AIM: 1) To Describe BIM and Summarize the features of BIM and benefits of using BIM over 2D CAD tools. 2) To explain concept of Categories, Families, Elements, Instances in Revit. Go to Insert Tab, choose a category. Pick a family and element. Understand the instances and insert it to Revit model 3) To Set up a Project…

AIM: 1)To create floor Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created from week 2 2)To Add walls based on the floor layout.…

  AIM:1) To model the ceiling above first floor level based on the project from week 3. 2) To Model a roof above the ceiling by selecting the footprints of the ceiling. Using the adjustment toolbars appearing on-screen adjust the roof slope to 10 degree. 3) To create plan views and Separate them toarchitecture…

AIM: TO THEORETICALLY ANSWER ALL THE QUESTIONS BELOW 1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ? 2) From the National Building Code list the groups that will be essential to you when you begin modeling in Autodesk Revit. 3) List the five major steps that occur in…

AIM: 1)To set project base point and project shared coordinates for the project in architectural template. 2)To set project parameters the same as the architectural model. Either by copying or setting it manually in structural template. 3)To make the architectural model a central model (enabling simultaneous…

1) AIM: To  Select the type of structure you want to build from one of the three  Multi-Unit Residential Apartment or Office Buildings or School. PROCEDURE: The type of structure i want to build from among the above three is Office Buildings. RESULT: Office buildings 2) AIM: To assume reasonable…

1. AIM: To answer What are HVAC systems? Why are they essential in the modeling of building RESULT: HVAC system means Heating Ventillation and Air Conditioning . It is a technology of indoor enviromental comfort. The goal is to provide thermal comfort and acceptable indoor air quality.It is an important part of the…

1.AIM: To answer the shortcuts of the folloeing commands.           a. Using 3D model create a section box           b. To create similar doors and windows in a floor plan layout           c. To reduce the thickness of lines visible…

1.AIM:Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve.PROCEDURE:Create three integer slider. for start end and step then add a range and connect integer sliders to it then create point by coordinate and a code block and one more point by coordinate  for…

1.AIM: To Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in classPROCEDURE: open the architectural file created in week 6 to 8 and then from the file menu go to export option…

AIM: To observe What is the mode of failure or damage of the beams in the figure above? Are the damages repairable? a) b)  c) OBSERVATION:a) Concrete is crushed and reinforcement exposed.    concrete spalled beyond the reinforcement which may be sign of rupture.    Beams top…