Hereby i going to explain how the QUICK RETURN MECHANISM AN CV JOINT are designed and assembled using CATIA V5 software. 1.First all parts are sketched using sketching workbench and saved in the different part files in the format of CAT.Part. 2.Then pad that sketches and give the required dimensions mention in that drawing…

The main aim is to create a Base Bracket Plastic Component through a given Class A Surface and perform Draft Analysis on the final plastic component.   STEPS FOLLOWED  Creation of Tooling Axis. Creation of Class B and Class C surface. Creating a solid part out of closed surface. Draft Analysis of Class A surface…

DESIGN AND DRAFT ANALYSIS OF SWITCH BEZEL  AIM  The aim of the project is to design the switch bezel and to do a draft analysis for it by creating the required tooling direction with the help of Bisecting method.  INTRODUCTION  The control panel bezel is the frame part of the window switch that…

AIM To create the Bumper Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  CONSIDERATIONS Ensure Proper Tree Structure Geometrical…

WEEK 10 - Challenge 1 - RIBS AND SCREW BOSS CREATION AIM To create a door handle from the given CLASS A surface. Create a TOOLING AXIS for the given class. To create a CLASS B surface from CLASS A. To create CLASS C surface and join with CLASS B and CLASS A surface. Make a DRAFT ANALYSIS. Then make a RIBS AND SCREW BOSS…

AIM To Create the Dog House for the Door Trim considering the design rules. Dog house is a engineering feature used for a supporting purpose in the door trim which was placed in the side of B SURFACE.   STEP BY STEP PROCEDURES FOR CREATING DOG HOUSE 1.Create a tooling axis for the given CLASS A SURFACE. …

AIM To create a HEAT STAKES and LOCATORS for the given DOOR TRIM.   PURPOSE OF HEAT STAKES Heat staking also known as thermoplastic staking is the process of joining two dissimilar materials together. In heat staking we use local heating and cooling to raise the temperature of plastic components and allow plastic…

AIM To create the A Pillar Design with the master section given as the intersection sketch with the Class A surface and create the tooling axis and perform the Draft analysis for the final solid part. Class A Visible surface is a Class-A surface.   TOOLING AXIS CREATION First create a point in the two sides of the…

FINAL PROJECT DEVELOPMENT OF A DOOR TRIM PANEL   AIM: To create a CAD model for door trim panel's parts by considering the given inputs of class A surface along with master section by following the design rules followed in OEM and tier1 companies. OBJECTIVE: To create a TOOLING AXIS for all separate parts. Perform…

                                                                                           …

                                                                                     UNDER BODY COATING…

                                                                                           …

                                                        REPORT ON SECTION MODULUS CALCULATION OF HOOD   AIM To calculate the section modulus of the previously designed hood…

                                                                                                                                                   WHEEL ARCH CALCULATION WHEEL ARCH The wheel arch, also known as the wheel well or fender, is the curved or flared area of a vehicle's bodywork that surrounds the wheel and tire.…

FENDER DESIGN AIM: To Design a FRONT FENDER of a Car by following the given Master section as per the Design considerations that are followed in an OEM's. INTRODUCTION WHAT IS FENDER A fender is a curving plate that covers the wheels on the side of an automobile and extends from the front bumper to the door in plastic,…

                                                                                           …

                                                                                           …

                                                                                         Design…

Aim:       Electrically defined the given connecters and connecter clip with the help of geometry and assemble by the electrical wiring harness workbench. WIRING HARNESS A wiring harness, also known as a wire harness or cable assembly, is a bundled collection of wires, cables, and connectors that are used to transmit electrical…

                                                                                                     WIRING HARNESS ROUTING AND PACKAGING Wiring harness routing and packaging refer to the process of designing, organizing, and securing electrical wiring systems within a vehicle, machinery, or any complex system that requires…