Menu

Executive Programs

Workshops

Projects

Blogs

Careers

Student Reviews



More

Academic Training

Informative Articles

Find Jobs

We are Hiring!


All Courses

Choose a category

Loading...

All Courses

All Courses

logo

Sandeep Ghosh

Ability to produce fine work and succeed in team environment as a team leader and member. A hardworking ,dependable, individual, proactive and with a long lasting interest in RCC and steel design.

Skills Acquired at Skill-Lync :

  • ETABS

Introduction

1. An effective communicator and team player with excellent interpersonal, presentation and analytical skills along with enthusiastic to work well under pressure. 2. Focused and goal driven with strong work ethics and commitment to offer quality work. 3. Strong desire to develop new design

41 Projects

Project on Concrete Mix Design for various grades of Concrete

Objective:

AIM :- To calculate the concrete mix design for M35 grade concrete with fly ash & M50 grade concrete without fly ash INTRODUCTION:-  A) M35 grade concrete Grade designation:- M35 Type of cement:- OPC 43 grade conforming to IS 8112 Type of mineral admixture:- Fly ash conforming to IS 3812 (Part-1) Maximum nominal…

calendar

14 Jun 2021 05:23 PM IST

    Read more

    Sketch a G+1 residential plan according to Vaastu Shastra and Calculation of Loads as per IS code

    Objective:

    Fig:- Schematic plan for G+1 Residential Bteuilding  1.Given data:- Dimensions of  door , D =2'6"*7'0" = 4 Nos Dimensions of window,W=3'0"*3'6"=2 Nos Dimensions of ventilator,V=2'0"*2'0"=2 Nos Dimensions of Main door,MD=3'3"*7'0"=1 Nos Total length of building = 9 m Total width of building = 4.87 m Dimension…

    calendar

    12 Jul 2021 03:37 PM IST

      Read more

      Creation of geometries by Coordinate system methods using AutoCad

      Objective:

      AIM:- To create the geometries by using the coordinate system method TOOLS REQUIRED:- AutoCAD 2022 and line command PROCEDURE:- a) Command:- Line or L Specify first point:- 2,1 Specify next point:-@6,0 Specify next point:-@0,1 Specify next point:-@-5,0 Specify next point:- @0,4 Specify next point:- @5,0 Specify next point:-@0,1…

      calendar

      02 Aug 2021 05:17 PM IST

      • FEA
      Read more

      Creating a Floor plan, Footing detail and Isometric view using AutoCad

      Objective:

      AIM:- To create a floor plan,footing detail and isometric view using AutoCAD PROCEDURE:-  Step 1:- Units are set to metre (m) limits and limax are used Zoom command is also used Snap and grid spacing of 0.5 unit is used Grid snap is rectangular and isometric snap Step 2:-  Command:- Line Specify first point:-1,1…

      calendar

      15 Aug 2021 04:42 PM IST

        Read more

        Drafting of various geometries using Chamfer, Fillet tool in AutoCad

        Objective:

        1. AIM:- To draft the following geometry 1 by using AutoCAD 2022 drafting software PROCEDURE:- Click on AutoCAD application and open the application Type a command QNEW to save the file Limits and limax is used  Zoom command is also used Type a command units  Select decimal in type,0.00 in precision and meters…

        calendar

        26 Aug 2021 05:45 PM IST

          Read more

          Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad

          Objective:

          1. AIM:- To draw a residence plan of figure 1 with the use of AutoCAD 2022   PROCEDURE:- Click on AutoCAD application and open the application Type a command QNEW to save the file Type a command units. Select architectural type,0'-0 1/2" in precision,insertion scale units in inches,decimal type and precision in 0…

          calendar

          08 Sep 2021 03:23 PM IST

          Read more

          Creation of Column Schedule and Drawing Template using AutoCad

          Objective:

          1. AIM:- To create a column schedule of figure 1 with the use of AutoCAD 2022   INTRODUCTION:- The various commands that are used for the creation of column schedule are line,offset,trim,dtext etc PROCEDURE:- Open the AutoCAD 2022 application Type a command QNEW to save the application Select architecture in type,0'-0"…

          calendar

          16 Sep 2021 05:43 PM IST

            Read more

            Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad

            Objective:

            1. AIM:- To draw the elevation and details of wardrobe by using AutoCAD 2022 Introduction:- Elevation and details of wardrobe are created by using the commands such as line,offset etc PROCEDURE:- a) PLAN:- Open the AutoCAD 2022 software Enter units in command box Select decimal in type,0 in precision and millimetres in…

            calendar

            29 Sep 2021 06:50 PM IST

            Read more

            Creating a Layout, Section and Elevation with dimensions using AutoCad

            Objective:

            1. AIM:- To create a plan and section of elevation for first,second and third floor plan usingb AutoCAD 2022 INTRODUCTION:- Plan and section of elevation are created by use of commands such as line,offset,trim,extend etc.Detail step by step procedure are been mentioned along with results PROCEDURE:- a) First,second and…

            calendar

            09 Oct 2021 06:12 AM IST

            Read more

            Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings

            Objective:

            1.AIM:-To create an architectural plan for a given layout of a residential building with a plot size 18.3m*6 m by using software AutoCAD 2022 INTRODUCTION:-Architectural layout for has been created by using a set of commands such as line,offset,trim,extend etc. PROCEDURE:- a) SITE LAYOUT Open AutoCAD 2022 Application Software…

            calendar

            17 Oct 2021 03:12 PM IST

              Read more

              Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

              Objective:

              1.AIM:- To create the templates of the title block with the use of AutoCAD 2022 INTRODUCTION:-Title block are created by use of set of commands such as line,offset,block etc. PROCEDURE:- Open the AutoCAD 2022 Application Software Type a command QNEW to save the file Type a command UNITS Select Decimal in type, precision…

              calendar

              24 Oct 2021 06:01 PM IST

                Read more

                Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

                Objective:

                1.AIM:-To create the layout of the kitchen and to provide hatch pattern with the use of AutoCAD 2022 NTRODUCTION:- Details of kitchen layout are created by using the commands such as line,offset etc PROCEDURE:- Open the AutoCAD 2022 software Type a command QNEW to save the file Enter units in command box Select decimal…

                calendar

                30 Oct 2021 09:57 AM IST

                Read more

                Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad

                Objective:

                1.AIM:-To create a layout and plan of the section of the challenge 7 using the template Tutorial-mArch.dwt, use the MV command to create the viewport of the size and also use the ATTEDIT command to create the viewport of the size. INTRODUCTION:- Layout and plan of the section of the challenge 7 are created by a set of…

                calendar

                03 Nov 2021 03:13 PM IST

                  Read more

                  Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad

                  Objective:

                  1.AIM:-To create a 3D furniture element along with suitable dimensions with the use of AutoCAD 2022 INTRODUCTION:- 3D furniture elements are created by a set of commands such as line,offset,extrude etc PROCEDURE:- Open the AutoCAD 2022 application software Type a command QNEW to save the file Type a command units Select…

                  calendar

                  09 Nov 2021 05:27 PM IST

                    Read more

                    Creating 3D Isometric view of various structural elements in AutoCAD

                    Objective:

                    1.AIM:- To create a isometric 3D view of the building with plan and elevation by the use of AutoCAD 2022 INTRODUCTION:- 3D isometric view of building are created by a set of various commands such as extrude,trim etc.3D model canbe visualised from all the three directions i.e. X,Y and Z axis.Real model can be visualised…

                    calendar

                    17 Nov 2021 05:33 PM IST

                      Read more

                      Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

                      Objective:

                      1.AIM;-TO create a 3D rendered model for a residential building with the use of AutoCAD 2022 INTRODUCTION:- 3D models are of following three types:- a) Wireframe model:- It is basically drawn with the lines. b) Surface model:- It is basically created of various lines to join c) Solid models:-It is a model which is having…

                      calendar

                      26 Nov 2021 05:30 PM IST

                        Read more

                        Introduction to REVIT concepts

                        Objective:

                        1. a) Open the Revit application b) Open new project,select template file and press OK c) Save the file in local computer d) Now the project has been created e) Name it as project 1   2. a) Go to the file menu b) Save the file in local computer. c) Now the project has been created. Save it as example project 1 3.a)…

                        calendar

                        03 Dec 2021 04:54 PM IST

                          Read more

                          Creating Levels, Grids, Layout and model elements for a residential unit using REVIT

                          Objective:

                          1. What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. AIM:- To understand the BIM process and to summarise the features of BIM and benefits of using BIM over CAD tools EXPLANATION:- A) Definition of BIM:- BIM refers Building Information Modelling which is a concept that was invoked…

                          calendar

                          24 Jan 2022 03:08 PM IST

                          Read more

                          Creating Walls, Partition walls and Floors for a residential layout using REVIT

                          Objective:

                          1. Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created…

                          calendar

                          17 Feb 2022 05:45 PM IST

                          Read more

                          3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT

                          Objective:

                          1.  Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level AIM:- To model a ceiling from the architectural tap above the wall at the first floor level based on the project saved from week 3 with the use of…

                          calendar

                          03 Mar 2022 09:46 AM IST

                          Read more

                          Introduction to National Building Code and Steps in a Construction project

                          Objective:

                          1. Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ? Solution:-Building codes or standard codes are essential for the modeling/efficiency of drawings in Revit because design codes ensure that the building is safe and serviceable and it does it not cause damage to the…

                          calendar

                          08 Mar 2022 05:01 PM IST

                          Read more

                          Usage of Collaborate tool in REVIT

                          Objective:

                          1.  Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project AIM:- To open an architectural file by using the manage tab and to set project base point and shared project coordinates for the point INTRODUCTION:- Project base point and shared project…

                          calendar

                          17 Mar 2022 07:00 AM IST

                          Read more

                          Creating Architectural and Structural model with 3D rendering using REVIT

                          Objective:

                          1. Select the type of structure you want to build from one of the three below:        a. Multi-Unit Residential Apartment        b. Office Buildings        c. School Solution:- I have selected to design an office building 2. Assume reasonable assumptions…

                          calendar

                          01 Apr 2022 06:15 PM IST

                          Read more

                          Structural analysis of a buidling using Robot Structural Analysis

                          Objective:

                          1.What are HVAC systems? Why are they essential in the modeling of buildings? Solution:- HVAC stands for heating, ventilation and air-conditioning. These includes the components which has also been given in REVIT features such as duct , duct placeholder, flex duct, air terminal, fabrication part, P&ID Modeler, pipe,…

                          calendar

                          20 Apr 2022 03:53 PM IST

                          Read more

                          Preparing Schedule & Cost Estimation for a building using REVIT

                          Objective:

                          1. Use the shortcut keys in Revit discussed in class to complete the following tasks and list them below           a. Using 3D model create a section box           b. To create similar doors and windows in a floor plan layout         …

                          calendar

                          07 May 2022 05:48 AM IST

                          Read more

                          Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo

                          Objective:

                          1. Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve. AIM:- To create a set of sinusoidal points, curve and to create a surface out of the curve by using REVIT 2022 INTRODUCTION:- Creation a set of sinusoidal points, curve and to creation a surface out of the curve…

                          calendar

                          13 May 2022 04:31 PM IST

                          Read more

                          Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork

                          Objective:

                          1. Use the Architecture/ Structure Project file developed by you in Week 6 to 8. Export the Revit architecture and structure model to Navisworks Cache file following the export settings discussed in class AIM:- To export the revit architecture and structure model to Navisworks Manage 2023 which has been previously…

                          calendar

                          01 Jun 2022 07:03 AM IST

                          Read more

                          Identification of Cracks

                          Objective:

                          1.What is the mode of failure or damage of the beams in the figure above? Are the damages repairable? Elaborate AIM:- To identify the mode of failure of the beams in the figure and identify the damage whether it is repairable or not INTRODUCTION:- The most common causes of failure during earthquake are:- 1) Formation of…

                          calendar

                          17 Jun 2022 03:15 PM IST

                            Read more

                            Calculation of Stiffness in Structural elements

                            Objective:

                            1. Compute lateral stiffness of the one story frame with an intermediate realistic stiffness of the beam. The system has 3 DOFs as shown. Assume L = 2h and Elb = Elc   AIM:- To compute the lateral stiffness of one story frame with an intermediate realistic stiffness of the beam INTRODUCTION:- Computation…

                            calendar

                            22 Jun 2022 05:57 PM IST

                              Read more

                              Understanding the concepts on Degrees of Freedom

                              Objective:

                              AIM:- To obtain Ln, Mn and Γn for each of the five modes associated wih the model, calculate the effective modal mass M*n and the modal mass participating ratios for the five modes and also obtain the base shear as per SRSS rule. INTRODUCTION- All the solutions are going to be explained with step by step procedure.…

                              calendar

                              02 Jul 2022 07:02 AM IST

                                Read more

                                Concept on positioning of Columns

                                Objective:

                                1. Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions X or Y (dots are columns, lines depict beams). Look into aspects of symmetry, redundancy and bi-directional stiffness and ductility.   AIM:- To explain the layout of the framing plan concerning earthquake…

                                calendar

                                07 Jul 2022 05:21 PM IST

                                  Read more

                                  Conceptual design of a building with columns and shear walls

                                  Objective:

                                    1. The building shown, 20 × 35 m in plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness) in three alternative arrangements, (a), (b), (c), all with the same total cross-sectional area of the shear walls. Compare the three alternatives, taking into…

                                  calendar

                                  15 Jul 2022 03:45 PM IST

                                    Read more

                                    Modelling of 25 storey building with the specified properties using ETABS

                                    Objective:

                                    AIM: To model and analyse G+25 multistory building using ETABS 2020 and to check the model and parameters as per IS 1893(1)-2016. INTRODUCTION: Modelling and analysis of G+25 multistory building using ETABS 2020 is being explained with step-by-step procedures PROCEDURES:  Open ETABS 2020 software Open New Model Project…

                                    calendar

                                    19 Jul 2022 03:53 PM IST

                                    Read more

                                    Project 1_Comparative study of different storey buildings for Seismic forces

                                    Objective:

                                      AIM:- To compare:- a) Factors influencing the natural period of buildings for different buildings b) Compare fundamental natural periods of buildings E & F as well as G & H c) Compare fundamental natural periods of buildings H, J and K. Have the buildings become more flexible or stiff due to changes in mass…

                                    calendar

                                    03 Aug 2022 08:29 AM IST

                                    Read more

                                    Reinforcement Detailing of Beams from ETABS output

                                    Objective:

                                    1. Detailed design of concrete buildings -1 Detailed design of beams in Etabs 2018.The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment ResistingFrame. The following challenge deals specifically with two continuous beams in the 1st floor.         1) 3 span continuous…

                                    calendar

                                    01 Sep 2022 06:12 PM IST

                                    Read more

                                    Reinforcement detailing of Columns from ETABS output

                                    Objective:

                                    1. Reinforcement detailing of columns in Etabs 2018. The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment Resisting Frame. The following challenge deals specifically with two columns at the following grid intersections. 3A 3B Provide details of longitudinal reinforcement for the two…

                                    calendar

                                    08 Sep 2022 08:04 AM IST

                                    Read more

                                    Analysis & Design of RCC shear walls in the model using ETABS

                                    Objective:

                                    1. The etabs file for a G+6 building is provided. Run the analysis and design the RCC shear walls (show in the etabs model). The following challenge deals specifically with the shear wall of size 300x1500 at grid A-11 in the structural model. Extract values of longitudinal steel ratio, boundary element length and shear…

                                    calendar

                                    16 Sep 2022 05:46 PM IST

                                    Read more

                                    Structural Modelling using Etabs 2018

                                    Objective:

                                    ` 1. The architectural drawings for a G+7 residential building in zone 5 has been provided. The floor plan is the same for all 7 floor levels. Possible column positions have also been provided. Conceptualize a framing plan layout and then model the building in Etabs. The following architectural drawings have been provided:…

                                    calendar

                                    06 Oct 2022 11:13 AM IST

                                    Read more

                                    Design of Shallow Foundation (Isolated Footings)

                                    Objective:

                                    1. Design a square footing for a column size of 400x400. The compression axial load for the load combination of (1.5 DL + 1.5 LL) is 2000 KN. The safe soil bearing capacity is 150 KN/m2 at a depth of 2 meters below E.G.L. Participants are free to go for either a tapered or stepped footing. Besides the total axial load,…

                                    calendar

                                    08 Oct 2022 06:08 PM IST

                                      Read more

                                      Foundation Design using SAFE

                                      Objective:

                                      1.Model the isolated footing provided in week 11 challenge on SAFE. Analyze and design it to verify the size, depth and steel provided as per calculations. AIM:-  To model the isolated footing by using  SAFE and to analyze and to design it to verify the size, depth and calculation of steel provided INTRODUCTION:-…

                                      calendar

                                      14 Oct 2022 03:42 AM IST

                                        Read more

                                        Week 1 Challenge

                                        Objective:

                                        1. 1. Write the steps involved to upload a .std file through web mail?    2. Name the different materials that can be designed using STAAD Pro.    3. Is it possible to capture images in STAAD Pro? If yes how?    4. Name the three ways by which you can create a model.    5. Write…

                                        calendar

                                        19 Dec 2022 05:41 PM IST

                                          Read more
                                          Showing 1 of 41 projects

                                          4 Course Certificates

                                          certificate

                                          Civil Engineering Fundamentals Module

                                          CertificateIcon
                                          Certificate UID: 8yb2mx1oiawut93c
                                          View Certificate
                                          certificate

                                          AutoCAD Essentials for Civil Engineers

                                          CertificateIcon
                                          Certificate UID: izl9k7o1yndurawt
                                          View Certificate
                                          certificate

                                          Drafting and Design Using Revit

                                          CertificateIcon
                                          Certificate UID: 7palykg3vw861ihr
                                          View Certificate
                                          certificate

                                          Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads

                                          CertificateIcon
                                          Certificate UID: si4a59dplm2zkhue
                                          View Certificate
                                          Showing 1 of 4 certificates

                                          1 Workshop Certificates

                                          certificate

                                          Analysis and design of Industrial structures using STAAD. Pro

                                          CertificateIcon
                                          Certificate UID: plf8tvk5xh
                                          View Certificate
                                          Showing 1 of 1 certificates

                                          Academic Qualification

                                          B.E

                                          Anna University

                                          12 Aug 2010 - 17 Apr 2021

                                          10th

                                          Ramakrishna Mission School

                                          02 Apr 2007 - 13 Mar 2021

                                          M.Tech

                                          Vellore Institute of Technology - VIT Chennai

                                          16 Jul 2015 - 14 Apr 2017

                                          12th

                                          Ramakrishna Mission School

                                          01 Apr 2009 - 01 Apr 2010

                                          Schedule a counselling session

                                          Please enter your name
                                          Please enter a valid email
                                          Please enter a valid number

                                          Here are the courses that I have enrolled

                                          coursecard
                                          4.8

                                          11 Hours of Content

                                          coursecard
                                          4.8

                                          31 Hours of Content

                                          coursecard
                                          Recently launched

                                          0 Hours of Content

                                          coursecard
                                          Recently launched

                                          18 Hours of Content

                                          coursecard
                                          Recently launched

                                          21 Hours of Content

                                          coursecard
                                          Recently launched

                                          10 Hours of Content

                                          Similar Profiles

                                          Apoorv Ranjan
                                          Apoorv Ranjan

                                          Ladder of success cannot be climbed with hands in pocket.

                                          Pruthvi Jagadeesh GK
                                          Pruthvi Jagadeesh GK

                                          The Future in Motion

                                          Krantiveer .
                                          Krantiveer .

                                          Give more than what you get you will get more than what you gave