Journey of Solidworks With Chopper Objective:- The objective of the Project is to Come with Effective Part Modelling by SolidWorks, learning of features and SolidWorks commands with respect to the understanding of design and development concepts Introduction:- Solidworks is industry use software, it took a lot of interest…

Detailed Report on Yacht Design Project.                                                            Title:- Enriching Skills with Yacht Design       …

Draft Analysis On Class A Surface In the automotive industry, several steps are followed before finalizing any design. The initial Phase is Sketching where all Artists and technical teams come up with different sketches. some of the sketches are selected and proceed for Clay Modelling and Clay modeling to ensure the outer…

Dear sir  Please Find Challange 2 Files Below Title:- Creation of Switch Bezel Base Thicken Part 1. Creation of Tooling Axis A. Tooling axis is the axis that gives the direction for inserting molten Fluid from Injection Molding or casing, this ensures our part body should prepare without any failure. B. Creation of…

Dear sir,  Please find Coin Holder Design Challange Files Below, Title:- Coin Holder Part Creation INDEX A. Surface Development 1. Input As Class A surface Draft Analysis   1.1 Nomenclature of Class A Surface   1.2 Tooling axis creation Creating Tooling axis From Center of Base Surface and MAximum Face View…

Dear Sir,  Please Find Challange Bumper. Title of Project:- Creation of Bumper Body From Class A Surface Inputs:- 1) Class A surface 2) Offset Thickness Tools:- 1) CAD Software (Catia V5 ) Procedure:- 1) Establish Flow Work for Creating CAD Part                 …

Dear sir  Please Find Week 8 challenge 6 Core and Cavity Design. Title:- Design Core and Cavity For Switch Bezzle Part Tools:- CAD Software (CATIA V5) Procedure:-                  A) Design a Solid Body of Part                  …

Dear sir,  Please Find the  Attached Work file For Week 9 (Ribs and screw Boss creation) Title:- Creation of Door handle With Fitting Arrangement Tools:- 1) Input class A feature             2) Thickness of part             3) Fitting Details (Screw size, Type of attachment, Placement, And Location of part in assembly…

Dear sir,  Please Find the  Attached Work file For Week 9 (Door Trim Dog house Creation) Title:- Creation of Door Trim With Doghouse Creation Tools:- 1) Input class A feature             2) Thickness of part             3) Doghouse Feature Details (Thickness,…

Dear sir, Title:- Door Trim Engineering Feature Creation of Heat stakes and Fourway Locators Tools:- 1) Input class A feature             2) Thickness of part             3) Heatstake & Locator Feature Details (Thickness, and approx Size)             4) CAD Software (Catia V5) Procedure:- 1) Create a Tree Flow chart for…

Dear sir, Title:- Door Trim Engineering Feature Creation of Heat stakes and Fourway Locators Tools:- 1) Input class A feature and Master Section             2) Thickness of part = 2.5 mm thk.             3) Doghouse Dimensions and drawing (Thickness, and approx…

Title: - Benchmarking base on Parameters Input:  No. of Family Members: - 05  Avg. usage of Car: - 500km/ Month and Daily Office Usage Budget: - 8 to 10 Lakh Other: - Fond of big cars Location: Bangalore Explanation:  Based On provided Criteria there are some SUVs which are listed below For Mr. D.S.…

Title :- Underbody Coating The under-body coating is applying a protective coating to the underside of a vehicle to protect it from rust, corrosion, and damage caused by road debris, moisture, and salt. This coating acts as a barrier between the metal and the outside elements, preventing them from coming into contact and…

TITLE:- ASSEMBLY WORKBENCH IN CATIA GIVEN:- ASSEMBLY 1:- QUICK PIN MECHANISM ASSEMBLY 2:- CV JOINT DESIGN :    ASSEMBLY 1: QUICK PIN MECHANISM      PARTS: BODY 1       SKETCH       FEATURE TREE       ISO-FV VIEWS         PARTS:…

Your Answers Dear sir, Title:- Final Trim Project in CATIA V5 Tools:- 1) Input class A features for Bottle Holder, Map pocket, Lower Substrate, Arm Rest             2) Thickness of each part is 2.5 mm             3) Master Section is given For Interlocking between…

TITLE:- DESIGN FOR HOOD PANEL INPUT: - 1. CAR OUTER PANEL CLASS A 2. HINGE FOR HOOD 3. STICKER  4. DRAWING FOR INNER HOOD  5. THICKNESS 0.75MM     PROCEDURE:-  DESIGN OF THE CAR INNER HOOD PANEL  1.1 SKETCH AND INNER PANEL CREATION 1.2 OUTER PANEL CREATION   1.3 SUPPORT SKETCH FOR STICKER…

TITLE: SECTION MODULUS OF CAR HOOD INPUTS: CAR HOOD PANEL  EXPLANATION : The car hood panel is a very important part, which plays a crucial role in safety and Maintainance, Car has a great history and based on different studies performance and Design evolved frequently.  Now different parameters are Depends on the Design…

TITLE:- Validation for Front Fender Design As per Europian Standards INPUT: -  1. Wheel and Fender 3d File' STANDARDS: -  1. There are several Standards made for Fender Design Validation  Japan Standards, European Standards, US standards 2. Japan's standards  Measure clearance L of the tire, hub, cap & fender in three…

Title :- Fender Design Input:-  Dimensions and Additional Details for fender design.   Software: -  1. Catia V5   Procedure: - 1. Fender Class A  after successful Passing in European standard Design rules applicable. 2. Fender Rules mentioned in the above Input picture. 3. Input Class A  4.…

Title:- Car Roof Exterior Panel Design Input: - Class A surface of Roof, Thickness Criteria For Bow rail, Center Rail, Front Rail, Rear Rail, and Roof Panel.  Design Rules for Car Roof, Center Rail, Front and Rear Rail, and Bow Rail. 1. Class A for Roof panel 2. Design Rules for Front Rail 3. Design Rules for rear Rail…

 Title:- Conceptual Design of Hatch-type Backdoor. Car backdoors, often overlooked, play a crucial role in the overall design, functionality, and safety of automobiles. Over the years, the automotive industry has witnessed significant evolution in backdoor design, driven by a combination of aesthetic preferences,…

Title:- Assembly of Butterfly ValveTools :- Solid works 2021 (Design software)Instruction :- Assembly of Butterfly valve and applying GD&T symbol to the drawing sheet. (Because of Storage Space NX CAD is not Downloaded or used to complete this challenge, Solidworks is Sufficient to perform…