Menu

Executive Programs

Workshops

Projects

Blogs

Careers

Student Reviews



More

Academic Training

Informative Articles

Find Jobs

We are Hiring!


All Courses

Choose a category

Loading...

All Courses

All Courses

logo

Snigdha ..Subhalagna

Skills Acquired at Skill-Lync :

  • ETABS

69 Projects

Project on Concrete Mix Design for various grades of Concrete

Objective:

1.I. STIPULATIONS FOR PROPORTIONING OF M35 GRADE CONCRETE This section has Specifications of the materials and requirements of the concrete to be made.   A Grade Designation M35   B Type of Cement OPC 53   C Type of Admixture Fly ash   D Maximum NominalSize of Aggregate 20mm   E Minimum Cement…

calendar

28 Oct 2021 01:06 PM IST

    Read more

    Sketch a G+1 residential plan according to Vaastu Shastra and Calculation of Loads as per IS code

    Objective:

    1.                     Assume slab thickness=125 mm Assume width of beam=300mm Assume depth of beam=450mm Assume lenght of column=300mm Assume breadth of column=300mm Assume height of wall=3000mm Assume of floor thickness=50mm Thickness of partition wall=100mm Thickness…

    calendar

    01 Nov 2021 04:17 PM IST

      Read more

      Creating a Floor plan, Footing detail and Isometric view using AutoCad

      Objective:

      1.AIM:-       To create the plan,footing detail &isometric view by using autocad. CS foundation details for load bearing wall. In this drawing we create a cs foundation detail for load bearing wall. Now we can see the command used for this drawing step by step. Step:- 1.First check the dimension as we…

      calendar

      10 Nov 2021 02:53 PM IST

        Read more

        Drafting of various geometries using Chamfer, Fillet tool in AutoCad

        Objective:

        AIM:- Drafting of various geometries using chamfer,fillet tool in autocad. INTRODUCTION:- Autocad consists of a number of drawing &modification tools.Among the modification tools are the chamfer,Fillet,Offset,Objectsnap,Rotate,Copy,Move,Mirror,Trim,Extend,& Join. CHAMFER:- A bevel or chamfer is- .An angled line…

        calendar

        11 Nov 2021 12:06 PM IST

        • BIM
        • CAE
        • CFD
        • CSS
        • DEM
        • FEA
        • GIS
        • HEV
        • MBD
        Read more

        Drafting of various geometries using Chamfer, Fillet tool in AutoCad

        Objective:

        AIM:- Drafting of various geometries using chamfer,fillet tool in autocad. INTRODUCTION:- Autocad consists of a number of drawing &modification tools.Among the modification tools are the chamfer,Fillet,Offset,Objectsnap,Rotate,Copy,Move,Mirror,Trim,Extend,& Join. CHAMFER:- A bevel or chamfer is- .An angled line…

        calendar

        11 Nov 2021 12:07 PM IST

        Read more

        Creation of Column Schedule and Drawing Template using AutoCad

        Objective:

        1.AIM:-to create a column schedule as shown in the figure. STEPS- .Open Autocad & enter unit  command (UN) in command box & select type as engineering & precission as 0'-0.000". .Select line command & draw a line of 84'in X direction & a line of 21' in Y direction & complete bigger rectangle.…

        calendar

        11 Nov 2021 03:11 PM IST

        Read more

        Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad

        Objective:

        1)AIM- To sketch the given residential layout using Autocad. Procedure:- .Type 'units' in the command prompt & press enter. .Select the type as Engineering & insertion scale as 'inches' click ok. .Type limits in the command prompt. .In the command prompt,specify the lower limit (0,0) & upper limit as (100',100').…

        calendar

        12 Nov 2021 12:14 PM IST

          Read more

          Creating a Layout, Section and Elevation with dimensions using AutoCad

          Objective:

          AIM-To draw the plan section as shown in figure. Pcocedure:- a)PLAN- .First we draw the plan. .Give outer wall thickness as 250mm & inner wall thickness as 125 mm. .Draw the construction line in vertical & horizontal direction using XL command & give thickness of wall. .Give the dimension of bed room 3100x3100…

          calendar

          12 Nov 2021 02:15 PM IST

            Read more

            Creating a Residence Layout, Seating plan, Toilet and Utility room plan using AutoCad

            Objective:

            1)AIM- To sketch the given residential layout using Autocad. Procedure:- .Type 'units' in the command prompt & press enter. .Select the type as Engineering & insertion scale as 'inches' click ok. .Type limits in the command prompt. .In the command prompt,specify the lower limit (0,0) & upper limit as (100',100'). .Press…

            calendar

            12 Nov 2021 03:20 PM IST

              Read more

              Creating a Wardrobe detailed drawing, Floor Plan, Kitchen Layout and Column Detail using AutoCad

              Objective:

              1.AIM-To draw the elevation & details of a wardrobe as shown in the figure using Autocad. Procedure- .in the command prompt type 'UNITS' & press enter. .Select the unit as DECIMAL & insertion scale as 'MILIMETER'. .Click ok. type'LIMITS' in the command prompt & press enter. .Select 'OFF' from the command…

              calendar

              13 Nov 2021 01:27 PM IST

                Read more

                Project 1 _Creating an Architectural plan for the provided plot size and develop relevant basic structural drawings

                Objective:

                1.DRAFT OF A LAYOUT OF A RESIDENTIAL BUILDING:- A)Plot size-60'x20'=(18.3x6)m Step1- We are creating the site plan of 3acres & multiple plots size. Step2-The total area is divided & cropped into different sectional areas. Step3-We are having the parking,basketball ground,volleyball ground,the 20ft road ,entertainment…

                calendar

                13 Nov 2021 03:23 PM IST

                  Read more

                  Creating Bar Bending schedule, Different Door types, and Creation of standard drawing templates using AutoCad

                  Objective:

                  1) .Open Autocad & new file. .Using line command draw a table. .Give line weight to line as shown in fig. .Use attribute command enter rev,description,by,& date. .Using multiline text command write client,architect,site etc. as shown in fig. .Select the required colour object in blue. .Command b(block). .Write…

                  calendar

                  13 Nov 2021 04:54 PM IST

                    Read more

                    Creating Kitchen layout, Hatching of Architectural elements and sectional view of an Industrial Building in AutoCad

                    Objective:

                    1)AIM:-To create the layout of the kitchen & provide hatches to it using the Autocad in detail. INTRODUCTION:- .Kitchen layout is the most important part of designing your perfect kitchen. .It's the layout that all will determine how you cook, how you eat & how you are sociable. .So whatever you're totally remodelling…

                    calendar

                    15 Nov 2021 01:31 PM IST

                      Read more

                      Creation of Multiple viewports, Scaling the drawing and setting in Template in AutoCad

                      Objective:

                      1)AIM:- .To create the layout of plan & section, creating viewports editing attributes& taking a plot. .To create a kitchen layout in an A4 sheet & take a plot. .To create multiview ports for individual section drawing, scaling it & taking plot. COMMANDS USED:- .VIEW .LAYOUT .MULTIPLE VIEW .MODEL SPACE…

                      calendar

                      16 Nov 2021 04:53 AM IST

                        Read more

                        Creating various 3D Models like Furniture, Footing, Girder, Column drop with panel and Gable Wall in AutoCad

                        Objective:

                        1)To create 3D furniture elements using Autocad. AIM:- PROCEDURE- .Type 'UNITS' in the command prompt & press enter. .In the unit tab select type as'ARCHITECHTURAL' intention scale as 'inches'. .Click ok. .Type 'LINE' command prompt & press enter. .Specify the starting point using the cursor. .Enter the next point…

                        calendar

                        16 Nov 2021 08:29 AM IST

                        Read more

                        Creating 3D Isometric view of various structural elements in AutoCAD

                        Objective:

                        1)Create the 3d isometric view of the building with plan & elevation given. AIM:- To create the 3d isometric view of the building with plan & elevation using Auto cad. PROCEDURE:- .In the command prompt type units>engineering>0'0" .In the command prompt type limmax>100',100'. .In the command prompt type…

                        calendar

                        16 Nov 2021 03:13 PM IST

                        Read more

                        Project 2_Creating a 3D rendered model for a Residential Building in AutoCad

                        Objective:

                        AIM:- To create a three-dimensional model of the residential building with a rendered view using Autocad. INTRODUCTION:- 2D wireframe model:-A wireframe model is a skeletal description of a 3d point.There are no surfaces in a wireframe model & it consists of only points, lines & curves that describe the edges of…

                        calendar

                        17 Nov 2021 04:12 PM IST

                          Read more

                          Creation of geometries by Coordinate system methods using AutoCad

                          Objective:

                          1)AIM:- To create geometry in Autocad using all the coordinates system methods. Introduction of coordinates system:- There are four coordinates system:- .Absolute system .Relative coordinates system .Relative polar system .Direct distance entry .Absolute system:- .In the absolute coordinates system, all inputs points specified…

                          calendar

                          23 Nov 2021 05:18 PM IST

                            Read more

                            Introduction to REVIT concepts

                            Objective:

                            INTRODUCTION TO REVIT CONCEPTS:- 1)From the file menu, create a new project (Structural/Architectural/Constriction template)& name the project appropriately. AIM:- .To create a project, select a template from the projects list or the new project dialog box. .To configure the project, choose to manage project information…

                            calendar

                            25 Nov 2021 02:27 PM IST

                            Read more

                            Creating Levels, Grids, Layout and model elements for a residential unit using REVIT

                            Objective:

                            1)BIM means (BUILDING INFORMATION MODELING). .BIM is an acronym for building information modeling or building information. It is a highly collaborative process that allows architects, engineers, real estate developers, contractors, manufacturers & other construction professionals to plan, design, & construct a…

                            calendar

                            29 Nov 2021 05:31 AM IST

                            Read more

                            Creating Walls, Partition walls and Floors for a residential layout using REVIT

                            Objective:

                            INTRODUCTION:- The Revit platform for building information modeling is a design & documentation system that supports the design, drawing,& schedules required for the building projects.BIM delivers information about project design, scope, quantities& phases when you need it. ARCHITECTURE TAB of the Revit…

                            calendar

                            29 Nov 2021 09:37 AM IST

                            Read more

                            Introduction to National Building Code and Steps in a Construction project

                            Objective:

                            1. Building codes are very important because they ensure that architects & contractors are making their structure as safe as possible. Safety & the webbing of tenants & residents is the ultimate goal for these regulations. This is why is so important to implement in our structures.& also the building codes…

                            calendar

                            30 Nov 2021 03:14 PM IST

                            Read more

                            3D Creation of Celing, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT

                            Objective:

                            1)AIM:-To model a ceiling from the architecture tab above the walls at the first-floor level. INTRODUCTION:-  The creation of ceiling within Revit is a very similar process to that of floors &  roofs-ie you can enter 'SKETCH mode' & literally sketch out the boundary of the ceiling yourself. The main thing…

                            calendar

                            03 Dec 2021 10:42 AM IST

                              Read more

                              Usage of Collaborate tool in REVIT

                              Objective:

                              10)                

                              calendar

                              03 Dec 2021 12:00 PM IST

                              Read more

                              Creating Architectural and Structural model with 3D rendering using REVIT

                              Objective:

                              calendar

                              08 Dec 2021 06:05 AM IST

                                Read more

                                Structural analysis of a buidling using Robot Structural Analysis

                                Objective:

                                   

                                calendar

                                08 Dec 2021 06:47 AM IST

                                  Read more

                                  Preparing Schedule & Cost Estimation for a building using REVIT

                                  Objective:

                                  5)a) b) c)  

                                  calendar

                                  08 Dec 2021 07:29 AM IST

                                    Read more

                                    Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo

                                    Objective:

                                    1.              

                                    calendar

                                    15 Dec 2021 10:57 AM IST

                                    Read more

                                    Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork

                                    Objective:

                                     

                                    calendar

                                    19 Dec 2021 07:01 AM IST

                                      Read more

                                      Identification of Cracks

                                      Objective:

                                      calendar

                                      06 Jan 2022 07:22 AM IST

                                        Read more

                                        Calculation of Stiffness in Structural elements

                                        Objective:

                                                                                                                                   …

                                        calendar

                                        06 Jan 2022 02:08 PM IST

                                          Read more

                                          Understanding the concepts on Degrees of Freedom

                                          Objective:

                                          calendar

                                          15 Jan 2022 09:47 AM IST

                                          Read more

                                          Concept on positioning of Columns

                                          Objective:

                                                                   

                                          calendar

                                          17 Jan 2022 10:27 AM IST

                                            Read more

                                            Conceptual design of a building with columns and shear walls

                                            Objective:

                                            calendar

                                            17 Jan 2022 11:06 AM IST

                                              Read more

                                              Modelling of 25 storey building with the specified properties using ETABS

                                              Objective:

                                              calendar

                                              30 Jan 2022 10:54 AM IST

                                                Read more

                                                Project 1_Comparative study of different storey buildings for Seismic forces

                                                Objective:

                                                                             

                                                calendar

                                                30 Jan 2022 11:31 AM IST

                                                  Read more

                                                  Reinforcement Detailing of Beams from ETABS output

                                                  Objective:

                                                  calendar

                                                  30 Jan 2022 12:26 PM IST

                                                    Read more

                                                    Reinforcement detailing of Columns from ETABS output

                                                    Objective:

                                                         

                                                    calendar

                                                    31 Jan 2022 05:10 AM IST

                                                      Read more

                                                      Analysis & Design of RCC shear walls in the model using ETABS

                                                      Objective:

                                                      calendar

                                                      31 Jan 2022 05:30 AM IST

                                                        Read more

                                                        Structural Modelling using Etabs 2018

                                                        Objective:

                                                         

                                                        calendar

                                                        31 Jan 2022 05:58 AM IST

                                                          Read more

                                                          Design of Shallow Foundation (Isolated Footings)

                                                          Objective:

                                                          calendar

                                                          31 Jan 2022 06:16 AM IST

                                                            Read more

                                                            Foundation Design using SAFE

                                                            Objective:

                                                               

                                                            calendar

                                                            07 Feb 2022 11:41 AM IST

                                                              Read more

                                                              Project 2_Design & Analysis of a Hostel building at Guwahati, Assam

                                                              Objective:

                                                               

                                                              calendar

                                                              09 Feb 2022 04:53 AM IST

                                                                Read more

                                                                To plan a structural layout and to create grids using TSD

                                                                Objective:

                                                                calendar

                                                                08 Mar 2022 12:57 PM IST

                                                                Read more

                                                                To model columns for industrial steel structure using TSD

                                                                Objective:

                                                                 

                                                                calendar

                                                                15 Mar 2022 07:27 AM IST

                                                                  Read more

                                                                  To model beams and bracings for industrial steel structures using TSD

                                                                  Objective:

                                                                       

                                                                  calendar

                                                                  23 Mar 2022 01:41 PM IST

                                                                    Read more

                                                                    To calculate dead and live load for industrial steel structures and to apply them using TSD

                                                                    Objective:

                                                                     

                                                                    calendar

                                                                    12 Apr 2022 05:22 AM IST

                                                                      Read more

                                                                      To calculate wind load for industrial steel structures and to apply it by using TSD

                                                                      Objective:

                                                                      calendar

                                                                      19 Apr 2022 06:39 AM IST

                                                                        Read more

                                                                        To Analysis and Design of Steel Structures using TSD

                                                                        Objective:

                                                                             

                                                                        calendar

                                                                        15 May 2022 01:01 PM IST

                                                                          Read more

                                                                          Project 1_Analyze and design a steel building to 10T CRANE as per IS standard code using TEKLA STRUCTURAL DESIGNER.

                                                                          Objective:

                                                                          calendar

                                                                          15 May 2022 01:33 PM IST

                                                                            Read more

                                                                            To Model a RC residential structure using TSD

                                                                            Objective:

                                                                            calendar

                                                                            15 May 2022 01:45 PM IST

                                                                              Read more

                                                                              To calculate the dead , live and wind load for RC residential structure and to apply them using TSD

                                                                              Objective:

                                                                                 

                                                                              calendar

                                                                              15 May 2022 02:01 PM IST

                                                                                Read more

                                                                                To Generate seismic loading based on IS code and to run the analysis using TSD

                                                                                Objective:

                                                                                calendar

                                                                                03 Jun 2022 05:31 AM IST

                                                                                  Read more

                                                                                  To Design RC column and beam for RC residential structure using TSD

                                                                                  Objective:

                                                                                  calendar

                                                                                  03 Jun 2022 05:44 AM IST

                                                                                    Read more

                                                                                    To Design slab and foundation for an RC residential building using TSD

                                                                                    Objective:

                                                                                    calendar

                                                                                    03 Jun 2022 06:18 AM IST

                                                                                      Read more

                                                                                      To Generate report for Steel Industrial and RC structures using TSD

                                                                                      Objective:

                                                                                       

                                                                                      calendar

                                                                                      03 Jun 2022 06:26 AM IST

                                                                                        Read more

                                                                                        Project 2_Analyze and Design the RC office building as per IS standard code in TEKLA STRUCTURAL DESIGNER

                                                                                        Objective:

                                                                                         

                                                                                        calendar

                                                                                        03 Jun 2022 06:47 AM IST

                                                                                          Read more

                                                                                          Week 1 Challenge

                                                                                          Objective:

                                                                                          1.1) . 1.2) 1.3)Yes 1.4) 2.1)Deflection limit      Working stress methord      Limit stress methord      Limit state of collapse      Building maintenanace 2.2) 2.5)Introduction of project      Structural layout    …

                                                                                          calendar

                                                                                          04 Jul 2022 06:20 AM IST

                                                                                            Read more

                                                                                            Week 2 Challenge

                                                                                            Objective:

                                                                                             

                                                                                            calendar

                                                                                            04 Jul 2022 06:39 AM IST

                                                                                              Read more

                                                                                              Week 3 Challenge

                                                                                              Objective:

                                                                                              calendar

                                                                                              04 Jul 2022 06:50 AM IST

                                                                                                Read more

                                                                                                Project 1

                                                                                                Objective:

                                                                                                1. Design a multi-story Residential Building located in Bangalore using STAAD Pro Connect Edition. The specification must be as follows: Building floors G + 6 + R Plan dimension B = 25m ,  L = 16m Storey Height h = 3.5m Soil  Hard soil Use Residential Purpose Safe Bearing Capacity 180 kN/m2 Maximum slab…

                                                                                                calendar

                                                                                                06 Oct 2022 06:23 AM IST

                                                                                                Read more

                                                                                                Project 2

                                                                                                Objective:

                                                                                                Que.1. 1. Design a Warehouse Building located in Chennai using STAAD Pro Connect Edition. The specification must be as follows:      Width  30m Length 50m Eave Height 9m Bay spacing 6m Soil type Medium Safe Bearing Capacity 200 kN/m2 Roof slope 1 in 12 Assume suitable sections for structural elements.…

                                                                                                calendar

                                                                                                06 Oct 2022 06:26 AM IST

                                                                                                Read more

                                                                                                Project 1

                                                                                                Objective:

                                                                                                Aim -To determine the loading on the beam indicated and analyze the beams and draw bending moment and shear force diagram.   Given Data -  i) The floor system is 120 mm thick normal weight concrete floor ii) The floor finish and mech loads on the floor is 3 kPa = 3kN/m^2 iii) The live load on the floor is 5 kPa…

                                                                                                calendar

                                                                                                14 Apr 2023 08:04 AM IST

                                                                                                  Read more

                                                                                                  Project 1 - MODELLING, ANALYSIS & DESIGN OF TALL BUILDINGS IN ETABS

                                                                                                  Objective:

                                                                                                  PROCEDURE:-   PROCEDURE : open comfort software and enter the given data i.e. thickness and grade. then enter the lengths of the given member. enter the span details such as profile span, deck properties, and support width. then enter the mesh details such as grade, and yield stress. go to the next tab, i.e. loading,…

                                                                                                  calendar

                                                                                                  19 May 2023 12:17 PM IST

                                                                                                    Read more

                                                                                                    Project 2 - MODELLING, ANALYSIS & DESIGN OF COMPOSITE STUCTURES IN COMFLOR & ETABS

                                                                                                    Objective:

                                                                                                    AIM : A 30 - 40hr project on modelling, analysis & design of a state-of-the-art tall composite building using ETABS software. The composite members to be designed using Comflor software. Key Highlights: a. Modelling The structural model prepared for the project 1to be used for the project 2. Prepare two distinct structural…

                                                                                                    calendar

                                                                                                    26 May 2023 10:15 AM IST

                                                                                                    Read more

                                                                                                    Project 1

                                                                                                    Objective:

                                                                                                    Aim: To Perform Form-finding and structural analysis structure of multiple masts. Procedure: Step 1: 1) Open RFEM Software 2) Create new file 3) Edit the name of the new model and click ok Step 2: 1) Click tick mark for form finding option Step 3: 1) Create a new line 2) set the node 3) Click ok   Step 4: 1)…

                                                                                                    calendar

                                                                                                    22 Jun 2023 12:44 PM IST

                                                                                                      Read more

                                                                                                      Project 2

                                                                                                      Objective:

                                                                                                      Aim: Model of a membrane roof with cables. The modeling, form-finding and create the cutting patterns to the structure. Procedure: Create a new project and enablr form finding and cutting pattern options       Create the nodes for the membrane structure   Connect the lines to the nodes    …

                                                                                                      calendar

                                                                                                      22 Jun 2023 12:58 PM IST

                                                                                                        Read more

                                                                                                        Project 1

                                                                                                        Objective:

                                                                                                        A residential society has 200 x 2BHK flats and 100 x 3BHK flats. A typical family in a 2BHK flat has 3 persons/flat and a 3BHK flat has 4 persons/flat. The gross water demand (per person per day in liters) can be calculated by taking the aggregate of the usage for all the below listed activities. Activities Consumption…

                                                                                                        calendar

                                                                                                        26 Jun 2023 12:25 PM IST

                                                                                                        Read more

                                                                                                        Project 2

                                                                                                        Objective:

                                                                                                        Aim :-            Conduct the post-processing of the results once the analysis is complete. The first task includes checking the base pressure and settlement beneath the base slab which should be within the limits mentioned in Project-1. If these limits are exceeded then the dimensions need…

                                                                                                        calendar

                                                                                                        26 Jun 2023 12:29 PM IST

                                                                                                          Read more
                                                                                                          Showing 1 of 69 projects

                                                                                                          11 Course Certificates

                                                                                                          certificate

                                                                                                          Civil Engineering Fundamentals Module

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: z2dwpxt01hg9mylk
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          AutoCAD Essentials for Civil Engineers

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: 96oj02dmzixvh5se
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          Civil Engineering Fundamentals Module

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: 1r3bjepcqt8v50mn
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          AutoCAD Essentials for Civil Engineers

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: rzmpbdgy3njwa7f4
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          Drafting and Design Using Revit

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: 9goztjac20yik5fd
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          Analysis and Design of High Rise Buildings using ETABS and Foundation Design using SAFE for Seismic Loads

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: tgv85rjoaq2x0km7
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          Analysis and Design of RCC & Steel Structures using Tekla Structural Designer

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: sm3p9e6h5fk4vwt1
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          Analysis and Design of Buildings using STAAD.Pro - A Professional Approach

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: z9crmq7bvjt380ne
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          Structural Analysis and Design of Composite Structures using ETABS

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: ieqptwdovm9nrx25
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          Design of Tensile Structures

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: b0c7qxmhgjsr9uv4
                                                                                                          View Certificate
                                                                                                          certificate

                                                                                                          Design of Tanks by Finite Element Analysis

                                                                                                          CertificateIcon
                                                                                                          Certificate UID: 1n2vpg5xse7fizt9
                                                                                                          View Certificate
                                                                                                          Showing 1 of 11 certificates

                                                                                                          Academic Qualification

                                                                                                          12th

                                                                                                          I HAVE NOT DONE 12th

                                                                                                          01 Apr 2022 - 12 Apr 2022

                                                                                                          Diploma

                                                                                                          KIIT

                                                                                                          01 Apr 2005 - 01 Mar 2008

                                                                                                          10th

                                                                                                          saraswati sishu vidya mandir

                                                                                                          01 Apr 2004 - 15 Feb 2005

                                                                                                          Schedule a counselling session

                                                                                                          Please enter your name
                                                                                                          Please enter a valid email
                                                                                                          Please enter a valid number

                                                                                                          Here are the courses that I have enrolled

                                                                                                          coursecard
                                                                                                          4.8

                                                                                                          11 Hours of Content

                                                                                                          coursecard
                                                                                                          4.8

                                                                                                          31 Hours of Content

                                                                                                          coursecard
                                                                                                          Recently launched

                                                                                                          18 Hours of Content

                                                                                                          coursecard
                                                                                                          Recently launched

                                                                                                          21 Hours of Content

                                                                                                          coursecard
                                                                                                          Recently launched

                                                                                                          10 Hours of Content

                                                                                                          coursecard
                                                                                                          5

                                                                                                          24 Hours of Content

                                                                                                          coursecard
                                                                                                          Recently launched

                                                                                                          21 Hours of Content

                                                                                                          Similar Profiles

                                                                                                          Apoorv Ranjan
                                                                                                          Apoorv Ranjan

                                                                                                          Ladder of success cannot be climbed with hands in pocket.

                                                                                                          Pruthvi Jagadeesh GK
                                                                                                          Pruthvi Jagadeesh GK

                                                                                                          The Future in Motion

                                                                                                          Krantiveer .
                                                                                                          Krantiveer .

                                                                                                          Give more than what you get you will get more than what you gave