Forward Kinematics of 2R Robotic Arm Manipulator   Commands used in program close all   used for close all graph open in background clear all   used for clear all values saved in workspace clc   used for clear screen   % Used to write comment ; Used to save value in workspace but…

Aim- Creating a code to solve Otto Cycle & plot a graph bbetweem Pressure & volume. Calculate it’s Thermal Efficiency. Theory- An Otto cycle is an idealized thermodynamic cycle that describes the functioning of a typical spark ignition piston engine. It is the thermodynamic cycle most commonly found…

Aim – Write a program to solve ODE equation & represent the equation of motion of  a simple pendulum with damping.   Theory- An ordinary differential equation (also abbreviated as ODE), in Mathematics, is an equation which consists of one or more functions of one independent variable along with their…

Aim:- Write a code in MATLAB to optimise the stalagmite function and find the global maxima of the function. Plot graphs for all 3 studies and for F maximum vs no. of iterations   WHAT IS OPTIMIZATION. Optimization is a technique to find the best solution of a problem.It helps us to take a right decision. The main…

Aim – Write a code in MATLAB for Find Cp, H and S from a thermo data file Objective – Write a function that extracts the 14 co-efficients and calculates the enthalpy, entropy and specific heats for all the species in the data file. You will be reading this file NASA thermodynamic data(Tip: use fopen and fgetl).…

TOOLING AXIS:- A tooling axis is the direction of a component where the component is easily ejected from core and cavity. A tooling axis is a most important for removing material with very finished surface. Before start working in any component it is needed to create a tooling axis firstly. Creation of tooling axis:- Most…

TOOLING AXIS:- A tooling axis is the direction of a component where the component is easily ejected from core and cavity. A tooling axis is a most important for removing material with very finished surface. Before start working in any component it is needed to create a tooling axis firstly. Creation of tooling axis:- Most…

Objective:- The main objective of this challenge is to design a Core and Cavity for a Switch Bezel in CATIA V5 with the help of a surface workbench. Draft Analysis:- A draft analysis is helps to detect a angle of a component. it will be easily removed. In catia a draft analysis is performed based on colour rain identify…

TOOLING AXIS:- A tooling axis is the direction of a component where the component is easily ejected from core and cavity. A tooling axis is a most important for removing material with very finished surface. Before start working in any component it is needed to create a tooling axis firstly. Creation of tooling axis:- Most…

Objective:- Create the Bumper Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. Introduction:- A class A surface is our given data. By using…

Aim:-  Create the Door Trim Plastic component through the given Class-A surface. Objectives:- • Creation of Tooling axis with appropriate draft angle. • Creation of other surfaces (eg, B and C surfaces) for creating a solid component. • Perform Draft analysis on Class A surface and Solid model hence…

Objective:- Creation of Attachment Feature (Ribs & Screw Boss) To Creation of Door Handle by using given CLASS A (close surface component). Cretion of close Solid body by using close surface component. Creation of Attachment Features (Ribs & Screw Boss) Procedure For Creation Of Solid Component:- Creation…

AIM:- To Create the Door Trim Component from the given Class-A surface. To Create the Tooling axis for the given Class-A Surface. To perform the Draft analysis on CLASS A and the final solid component. To Create the B Side Feature(Dog House) on the component by following the design rules.   Check CLASS A Continuity:-…

AIM: To Create the Door Trim with Engineering Features Component from the given Class-A surface. To Create the Tooling axis for the given Class-A Surface. To perform the Draft analysis on CLASS A and the final solid component. To Create the B Side Feature(Locators, Heat Stakes & Dog House) on the component by following…

AIM: To Create the A pillar Design with Master Section Component from the given Class-A surface. To Create the Tooling axis for the given Class-A Surface. To perform the Draft analysis on CLASS A and the final solid component. To Create the B Side Feature(Dog House) on the component by following the master section.  …

AIM : To create part models and assemble the components using the 2D drawings which were provided. OBJECTIVE : To Create a individual part from given 2D drawing. To Create a assembly from individual part by using assembly  workbench To create a 2D drawing of those part by using Drafting. ASSEMBLY :- Assembly modeling…

Aim: - Creation of CAD model (Car Door Inner Panel ) with reference to given class A surface by using a given master section, create attachment (Heat Stake, Ribs, Flanges etc…) and perform a draft analysis to check the manufacturing feasibility of the component. Abstract: - The project deals with the explanation…

BENCHMARKING:- Benchmarking is a technical word of Comparison. In this we make a comparison between different-different product, Services, Performance & Features. In this a comparison of what is already exist in the market and how can we implemented is with the plus point of existing competitor of the product. Benchmarking…

UNDERBODY COATING Underbody coating is a thick cladding that is placed uniformly to the car underside. The main purpose to use underbody is it provide a long term protection from corrosion to cars underbody. It also protects the parts like internal body, panel, frame, rails and other inner cavities that are not physically…

Objective :-  To create a Hood Inner Panel, Outer Panel and Reinforcement by using hood outer panel skin,  master section and design parameter. Create a hood assembly by using parts Inner Panel, Outer Panel, Hinges, Latch & Striker. Use a constraint for joining of 2 different different part.  Hood :–…

Aim:- To explain & find a Section Modulus of a Hood and Optimize a best section modulus for hood by increasing/ decreasing the cross section area. SECTION MODULUS:- A section modulus is a direct measure of the strength of the component. It doesn’t represent anything physically. A component that has a larger section modulus…

Aim :- Calculate the wheel Arch gap at required point and check whether the car passes the European Srandard. Wheel Arch :- Wheel Arch is the semi-circular part of the fender positioned above the wheel of the vehicle. The design of the wheel arch of the fender should be such that it must shield wheels and protect…

AIM :- To Design a fender and its mounting by using a given fender skin & master section for wheel arch by using NX CAD as per engineering design standard.   OBJECTIVE :- Design a front fender from the given skin data and the master section provided with Drip mounting, A-pillar, Sill, Bumper and Baffle (splash)…

ROOF DESIGN AIM:- To Design a Roof with its components by following the master section of the front roof rail, Bow roofs, Center roof rail and Rear roof rail with all the design parameter. OBJECTIVE : To design car roof with front roof rail , bow roofs, central roof rail and rear roof rail for the the given styling surface.…

AIM:-   To create a backdoor design by using a given CLASS A surface & by following a appropriate design methodology. OBJECTIVE :- Use the provided styling surface to come up with a back door design, use appropriate design methodologies and provide the necessary reinforcements and embosses. Need to include…

OBJECTIVE:- To design a butterfly valve and apply GD&T to it's components and final assembly BY using Siemens NX-CAD. INTRODUCTION:- A butterfly valve belongs to the quarter-turn valve family of valves. When the disc is turned a quarter turn, the valve is fully open or closed in operation. The "butterfly" is actually…