MATLAB PROGRAM TO STIMULATE FORWARD KINEMATICS OF A 2R- ROBOTIC ARM  AIM: To stimulate and to create the animation video for the forward kinematics of a 2R- Robotic arm Software used: Matlab-2022 Procedure: To create the stimulation, initially we need to know about the robotic arm details such as its length (l) and…

Aim: To solve the otto cycle using the matlab to get the PV diagram and to find out its thermal efficiency. Software used: Matlab R2022a Description of the Project: An Otto cycle is an idealized thermodynamic cycle that describes the functioning of a typical spark ignition piston engine. Now in this project we…

   Solving the ODE for the simple pendulum and to create the animation of the pendulum Aim: To solve a second order ODE of a simple pendulum and also to create its animation using Matlab Software used:  MATLAB R2022a Project Description: Order of an ODE: The order of a differential equation is defined to…

Optimization of Mathematical Stalagmite function using Genetic Algorithm Aim: To write a code to optimize the stalagmite function and to find out the local maxima with the help of genetic algorithm Software used: MATLAB R2022a Project Description: Stalagmite:- A stalagmite is an upward-growing mound of mineral deposits…

Optimization of Mathematical Stalagmite function using Genetic Algorithm Aim: To write a code to optimize the stalagmite function and to find out the local maxima with the help of genetic algorithm Software used: MATLAB R2022a Project Description: Stalagmite:- A stalagmite is an upward-growing mound of mineral deposits…

                           Parsing- Nasa thermodynamic data file using Matlab Aim:-  To write a function to extract the 14 co-efficients and calculates the enthalpy, entropy and specific heats for all the species in the given NASA thermodynamic…

                                    Rankine cycle stimulator using MATLAb Aim:- To stimulate the Rankine cycle using the matlab and to find out the parameters like Pressure, temperature, enthalpy & entropy at all the for state…

                                           SIMULINK WEEK 2 CHALLENGE:- Objective :- 1) To create the working stimulation of a bell 2) With the help of a thermistor to sense the temperature of a heater &…

                                                              SIMULINK WEEK 4 CHALLENGE Aim:- 1) Implement control logic of a “washing machine” using Stateflow…

BAJA All-Terrain Vehicle (ATV) Model- STUDY & ANALYSIS Aim:- To make a clear study and analysis on the ATV model with the help of the Simulink model and to prepare a technical report. Basic structure of the project:- This report contains the explaination that includes BAJA ATV model with Continuously Variable Transmission(CVT).These…

             WEEK 1- UNDERSTANDING BATTERY CHEMISTRY CHALLENGE Aim:- 1.To prepare a table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells.Give your detailed explanation on it 2.Compare the…

                                    STATE OF CHARGE ESTIMATION Objective:- 1. To stimulate the 3 test cases from harness dashboard and to write a detailed report on the results 2.What is coulomb counting? For the above model, to explain…

                                                                    PROJECT 1                                      MECHANICAL DESIGN OF A BATTERY PACK AIM:- To design a battery pack with a capacity of 18kWh and Cells ANR26650M1-B and also to prepare a detailed battery pack drawing along with the enclosures. Project Description:-…

                                         THERMAL MODELLING IF THE BATTERY PACK Aim:- For a 10 cell series lithium ion battery model, simulate the thermal effects and compare life cycle performance at various temperatures,…

                        Development of a forward energy-based fuel consumption model of a conventional vehicle.                                      Objective:- To build…

                                                                                           …

                                     2D MESHING OF A SHEET METAL ( CAR HOOD ) COMPONENT USING ANSA. AIM:- For the given Hood model, Take the mid surface for all the components after checking the geometrical errors and mesh…

                                   2D meshing for Plastic component ( Bottle Cap ) using ANSA AIM:- For the given Plastic Bottle Cap model, to check for the geometrical errors and also to take the mid surface by suitable mid surfacing techniques. And the meshing to be done for the given component for the given quality…

TOOL TEST 1

TOOL TEST 1 COMPONENT LINK:- https://drive.google.com/file/d/1jGCMMP7GaykjPkycl8nkNzlrCTfHdExX/view?usp=sharing

                                       Week- 5 - Solid meshing of Rear view mirror component using ANSA Aim:- For the given rearview mirror component, tetra meshing should be done for the given quality criterias. Quality Criterias:- S.No  Quality Criteria  Value  1 Target/Average length   1 2 Minimum Length  0.5 3 Maximum…

                                                            Mini Project - Vehicle Direction Determination Overview of the project:- Identifying the direction of the vehicle…

                                          Adaptive Cruise Control- Model Based Development Adaptive cruise control:- Adaptive cruise control (ACC) is a system designed to help vehicles maintain a safe following distance…

                                                 MBD- Traffic Jam Assistant Feature Objective:- To develop one specific requirement of Traffic Jam Assistant algorithm which would predominantly feature in the IPC algorithm Project Description:- Requirements Provided:- Requirement 1: Input Signal “Input_Voltage” is compared…

Aim:- For the given CCB CAD model, Check for the Geometry cleanup (if required), Take the mid surface, and Mesh it with the given 2D element Quality criteria.  Project Description:- Components Taken for meshing:- ( Cross car beam assembly ) Procedures for Meshing a 2D component:- i) Importing the CAD model into ANSA:-…

                                                                                                                                Project 1 - Meshing of Floor Panel AIM:- To mesh the given floor panel for the given quality criterias without any failure in the elements. Project description:- FLOOR PANEL GIVEN:-   Procedures…