REPORT : MODELLING AND ASSEMBLY OF A YACHT Title : Modelling and Assembly of a Yacht Objectives : The main objectives of this project are To create an assembly of a yacht. To design the parts of the yacht. To know the application of the decals and photoview 360. Introduction : Solidworks is 'the software to master'…

Title : Modelling and Assembly of an American Chopper Objectives :  The main objectives of this project are To design the parts of the Chopper. To create an assembly of a Chopper. To know the application of the decals and photoview 360. Introduction : Solidworks is ‘the software to master’ which helps…

Aim : To create a tooling axis for the fan cover meeting the draft requirements. Draft Analysis : It helps to gather the draft angle on multiple surfaces without the need for manual measurements. Draft Angle :  It is the angle that the draft faces make with the pulling direction. Pulling Direction : It…

Aim : To create the Base Bracket Plastic component through the given Class-A surface.  Draft Analysis : It helps you to detect if the part you drafted will be easily removed. This type of analysis is performed based on color ranges identifying zones on the analyzed element where the deviation from the draft…

Assembly 1 Quick Return Mechanism Feature Tree Parts   Assembly 2 C. V Joint   Parts

Aim : To create the Switch Bezel Plastic component through the given Class-A surface. Given Data : Thickness = 2.5mm Draft Analysis : It helps to gather the draft angle on multiple surfaces without the need for manual measurements. Draft Angle :  It is the angle that the draft faces make with the…

Aim : To create the Coin Holder Plastic component through the given Class-A surface.  Given Data :   Thickness = 2.5 mm   Draft Analysis : It helps to gather the draft angle on multiple surfaces without the need for manual measurements. Draft Angle :  It is the angle that the…

Aim : Core & Cavity Design Draft Analysis : It helps to gather the draft angle on multiple surfaces without the need for manual measurements. Draft Angle :  It is the angle that the draft faces make with the pulling direction. Pulling Direction : It allows you to define the coordinates and…

Aim : To Create the rib for the Centre console coin holder considering the design rules. Draft Analysis : It helps to gather the draft angle on multiple surfaces without the need for manual measurements. Draft Angle :  It is the angle that the draft faces make with the pulling direction. Pulling…

Aim : To create the boss and Dog House for the Centre console coin holder considering the design rules. Given :    Draft  - 0.5 degrees on walls of boss   Thickness -  Typically 40%* of the nominal wall at the base.   Height to Diameter Ratio -  3:1   Radii…

Aim : To create the Door Applique Plastic component through the given Class-A surface   Procedure : Step 1 : Check for any openings in the model using the boundary function. Step 2 : Create a centre point. Step 3 : Draw the tooling axis using line definition. Step 4 : Perform Draft Analysis. Step 5 : Then extract…

Aim : The aim of this project is to model the B pillarcomponent along with the required attachmentfeatures using the given Class A surface and the master section of the component. A class A surface is any of a set of freeform surfaces of high efficiency and quality. Although, strictly, it is nothing more than…

Aim : To create CAD model considering following inputs as like in OEM and tier1 companies  Class A surface  Nominal thickness : Refer master sections  Attachment strategy :  Use Push pin with Dog house for Lower substrate – Door panel attachment Use heat stakes for part to part attachment Abstract…

Title of the project : To design a sheet metal casing using NX CAD Software. Objective : To design a casing using Siemens NX12 sheet metal Software. Procedure : Create a new sheet metal model called casing. Create a sketch in the xy plane and draw a rectangle. Give the dimensions. Exit the sketch. Use the tab button for…

Title :  Design of a sheet metal box assembly using Siemens NX application. Objective :  To design a box assembly using Siemens NX Cad application.   Procedure : Design of a sheet metal box assembly using Siemens NX application. Create a base of 1 mm thickness. Add flanges to it. Close the corners.…

Title : To create a bracket using Siemen's NX Cad software. Objective :  To design a bracket using Siemens NX12 sheet metal Software.   Procedure : Draw a sketch of given dimensions in the XZ plane. Add a base to it of thickness 3mm. Use the normal cut out feature to remove the unwanted material. Break the…

Title : To create enclosures with all shapes for angles using NX Cad. Objective : To create a flat pattern of the body for drafting and further manufacturing.   Procedure : Create a solid body that encompasses the interior volume of the final enclosure shape using tools in the modelling application. Wrap the solid…

Title : To create a metal bracket from the 2D drawing using NX Cad software. Objective : To create a metal bracket from given sketch using NX Cad software.            Procedure : Draw the sketch for the right view in the yz plane. Draw the sketch for the front view in the XZ plane. Contour…

1. What is Benchmarking ? Ans : Benchmarking is the process of improving performance by continuously identifying, understanding, and adapting outstanding practices and processes found inside and outside an organization. Benchmarking of business processes is usually done with top performing companies in other industry…

UnderBody Coating : Underbody coating is usually a dense cladding (often based on rubber) applied uniformly to the undercarriage of the automobile. It is normally sprayed or painted on when the car is just out of the dealership and is clean. But even if you are getting the undercoating applied after a couple of years,…

Aim : To Design a Hood using Nx Cad Hood Definition : A Hood or Bonnet is main component of a car at the front portion. It is used to decorate the car and add luxurious look. The shape of the bonnet is made aerodynamic in order to minimize the air effect. Bonnet is generally used to access the parts easily such as radiator,…

Aim :  To calculate the Wheel Arc area and prove whether the car will pass the standards or Not. Fender : It is the part of an automobile, motorcycle or other vehicle body that frames a wheel well (the fender underside). A fender protects and frames its wheels and keeps mud from splashing it.   Wheel…

Title : Section Modulus calculation and optimization   What is Section Modulus ? Section modulus is a geometric property for a given cross-section used in the design of beams or flexural members. Other geometric properties used in design include area for tension and shear, ragius of gyration for compression,…

Title : For the Sill mount, Bumper Mount and A-Pillar mount create your own design according to the Engineering standard.   Fender :   It is the pressed and formed sheet-metal part mounted over the road wheels of an automobile, bicycle, etc., to reduce the splashing of mud, water, and the like. A device…

Aim :   For the Given Roof styling, Develop the essential flanges and reinforcements, Provide appropriate dimensions and check for Draft analysis, and submit your Section Inertia report on the 0-Y section. Car Roof : An automobile roof or car top is the portion of an automobile that sits above…

Aim : To use the provided styling surface to come up with a back door design, use appropriate design methodologies, and provide the necessary reinforcements and embosses. Back Door : The enclosed space usually at the back of a car where you can put your bags etc. Back Door Consists of : Back Door Outer Panel Back Door…

Make a Simulink model of Doorbell using solenoid block with the following details: In the above arrangement, when the switch is closed the electromagnet receives electrical power from the battery and pulls the metal arm to hit the bell producing sound.  Create a situation where the switch is closed for 2…

Implement control logic of a “washing machine” using Stateflow as per given sequence:  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s. Then rinsing…

AIM: To study the system-level simulation of an all terrain vehicle.   INTRODUCTION:  A transmission changes gears depending on car speed and accelerator input (i.e., how far down you push the pedal of your car) so that the engine’s RPM or “revolutions per minute” are kept appropriately…