Project : In a laboratory experiment, data of voltage and current has been recorded and the same is attached in an excel file ( Click on this link VI.xlsx ). Read the excel file in the Matlab program and perform the interpolation in the range of -17.3:0.1:0.9. Generate the interactive plot for the interpolated data and…

 Wiring harness design in CATIA V5 - 3D modeling Week 2 Challlenge                          AIM:- Download following connectors & Connector clip cad data from given link & define it as Electrical Connector using Electrical Part design Workbench. Define all the necessary properties to Connectors & Clip.   Deutsch DT06 –…

                     AIM:- Download given P_Clamp & back shell cad data from given link & define it as Electrical  using Electrical Part design Workbench. Define all the necessary properties to neccessary part. And making a slit cot family to the corrugated…

Q1. CHALLENGE SOLVED:-              AIM:- Route the given harness layout in Electrical workbench. Make assume for harness bundle diameters. Using Following connectors as shown in layout diagram. Add protective covering on all branches connected to DT06-2S & DT06-4S connectors. Keep…

      AIM:- To Routing the provided harness layout in Electrical workbench. Make an assume for harness bundle diameters, Taken as own 15 & 10 for sub-branch respectively. Using the connectors provided. After completion of routing, Need to check:- Check the bundle Continuity. Add snap of result in submission Add annotation…

         AIM :-                        In this week’s assignment, I will have created 2 assemblies according to the content covered in the course videos. I have provided with 2D diagrams of the components , firstly created the individual…

         AIM  :- to Create the Base Bracket Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface has be create  meeting the require the draft angle and at the ending performed the Draft analysis on the model. The thickness…

          AIM :- To Create the Switch Bezel Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  Takiing the…

        AIM :- To flatten the harness assembly completed in “ week 4 challenge”. Place the flattened view on drawing sheet. Ensure with bundles with protective coverings has different visuals on drawing view.   OBJECTIVE :- The objective in this project is to create a flattened…

    AIM :-  To create the Bumper Plastic component from the provided Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle take as 3 Degree, and at the end perform the Draft analysis on the model. Take the Thickness…

                AIM :-                    To Create the rib for the Drill Handle considering the design rules, also Create the                       Screw boss for the Drill…

          AIM :-  To Create the Dog House for the Door Trim considering the design rules mentioned. Consider the thickness of the part to be 2.5 mm.   ABSTRACT :- We need to create the closed body 3mm tick from the provided Class A surface, before need to create the class…

  AIM :- We need to Create the Door Trim Lower Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model. Also need to Create the Heat…

                  AIM :- To create a pillar Design with the help of Master Section, that is provided with the Cat file in the Classs A surface.    ABSTRACT :- For the creation a pillar Design with the help of Master Section, that is provided with the Cat file…

  AIM :-  Development of a Door Trim panel  & create a B_side features as Push pin with Dog house for Lower substrate – Door panel attachment Use heat stakes for part to part attachment.    ABSTRACT :- To Creation of CAD model considering following inputs as like in OEM and tier1 companies a) Class A surface b) Nominal…

  AIM :- Mr. D.S. Pughazhyendhii is a married man who lives in Bangalore which is a highly crowded city. His Family comprises five members including his wife, a five-year-old boy, his father, and his mother. He visits his native place Madurai which is 500kms away from Bangalore once a month. Also, he will be…

AIM :- Write a one-pager about Under-Body Coating and its purpose, its types in detail, and its pros and cons.   ABSTRACT :- Here we need to explained what is the Under_Bpdy Coating & its purpose, Also their types in details with its pro's & con's respectively.   UNDER_BODY COATING …

  AIM :- Here we need to Route the Wiring harness on Given Engine and Prepare flatten view drawing in CATIA V5. Application of all Packaging rules, Industry best practices studied in this course shall be demonstrated in design. Need to Apply Protection coverings as required.   ABSTRACT :- Route the Wiring harness…

   AIM :-  Here we need to Route the Wiring harness on Given Back Door_Trim of a car and Prepare flatten view drawing in CATIA V5. Application of all Packaging rules, Industry best practices studied in this course shall be demonstrated in design. Need to Apply Protection coverings as required.   ABSTRACT :-  Route the…

  AIM :- Calculate the Wheel Arch gap at required points and check whether the car passes the European standard.   ABSTRACT :-  Here we need to ckeck the Wheel Arc_Gap by the European standard, on the provided wheel arc part file.   PROCEDURE_1 :- Draw a sketch. When we download the seimens…

  AIM :-  From the given Master section to create the Drip Area. For the Sill, Bumper, Baffle(Splash), and A-Pillar mount create your own design according to the Engineering standard that you learned. & need to create a report with all the relevant images included for the mounting points created.   The…

AIM :- Design Hood Outer Panel, Inner Panel and the necessary reinforcements by provided the Master Section mentioned with the Design parameters.   Procedure 01 :- Create a New Assembly of Hood & add another models within it. First i have downloaded the hood skin data, hinge & striker by the provided lync. This data then…

 AIM :-  For the Given Roof styling, create an ASSEMBLY by developing the essential flanges for the outer roof and creating the reinforcements.Provide appropriate dimensions and check for Draft analysis. Need to do a curvature study on the roof and perform calculations to determine the position of the Bow-roofs.    Here…

 AIM :-  To create a Back Door assembly by using the provided styling surface to come up with a back door design, use appropriate design methodologies, and provide the necessary reinforcements and embosses. Here we got a back door part file Styling surface, from which we need to create an assembly by follow the design…