DESIGN ASSEMBLY AND RENDERING OF AN AMERICAN CHOPPER IN SOLIDWORKS   OBJECTIVE Design individual parts in solid works Apply proper appearance to those parts Assemble the parts in solid works Make rendering of the assembled part to get a photorealistic image   INTRODUCTION            …

DESIGN ASSEMBLY AND RENDERING OF SUNSEEKER PREDATOR YATCH   OBJECTIVE Design individual parts Apply proper appearance Assemble individual parts to create a product Render the assembled product to create a photo realistic image INTRODUCTION          In this project first the individual parts of the predator yatch like the…

CREATION OF TOOLING AXIS AND DRAFT ANALYSIS OF FAN COVER TOOLING AXIS :              Tooling axis is the axis along which the core and cavity of plastic mold machine closes and the creation of tooling axis in such a way to ensure the process in the simpleset way without need for additional…

CREATION OF SURFACE BODY OF BASE BRACKET AND TOOLING AXIS AND DFAFT ANALYSIS TOOLING AXIS PURPOSE: The purpose of tooling axis is to first assign the direction of opening and closing of core and cavity  The another purpose of the tooling axis creation is to ensure the clearance of the class c suface by the core and…

CREATION OF TOOLING AXIS CLASS B CLASS C AND CLOSED BODY AND DRAFYT ANALYSIS OF THE SWITCH BEZEL 1.TOOLING AXIS the tooling axis is created along the z axis and the class a is intersected along x and y axis  X TOOL AXIS here in x axis only single phase is there and so a sketch is created by giving the angle to the…

CREATION OF TOOLING AXIS , CLASS B AND C CREATION AND CREATION OF SOLID AND DRAFT ANALYSIS OF THE DOOR ARM REST TOOLING AXIS Y AXIS first the base is extracted and mid point is created then a axis system is created using the point and create a dummy tool axis along z then intersection of the class a with the axis along…

CREATION OF TOOLING AXIS , CLASS B AND C AND DRAFT ANALYSIS OF COIN HOLDER TOOLING AXIS here the tooling axis is created by extracting the base and mid point is created on the base then a line drwan in z direction using the midpoint  here bisecting method is not used because the mid line itself cleares faces …

CREATION OF DRAFT ANALYSIS , CORE AND CAVITY DESIGN OF SWITCH BEZEL 1.DRAFT ANALYSIS  the solid body is drafty analysed using the main tooling axis 2.CORE AND CAVITY PARTING LINE: it is the line where the core and cavity closes and the parting line is always kept on the b side to ensute the asthetic outer remain undisturbed…

ATTACHMENT FEATURE CREATION  RIB DESIGN RULES FOR RIB DESIGN the rib thickness should be 0.4 or 40% of the plastic component thickness the rib height should be less than or equal to 5 times the thickness the draft should be 0.5 or less than that to ensure the thickness at the tip to be greater than or equal to 0.75mm…

DESIGN OF SCREW BOSSES AND DOG HOUSE USING THE DESIGN RULES AND PERFORMING DRAFT ANALYSIS ON THE COMPONENT DESIGN OF SCREW BOSSS      DESIGN RULES FOR SCREW BOSS the thickness of the boss 40% of the component thickness that is 40%2.5= 1mm then height to diameter ration is 3:1 the draft for this is 0.5deg…

DOOR APPLIQUE SOLID CREATION , DRAFT ANALYSIS AND ALSO ATTACHMENT FEATURE CREATION 1.SOLID CREATION TOOLING AXIS from the given class a surface it can be seen that from y axis there is no parallel  face to the line  so a point is created on A surface at 0 and a line is created along the y axis draft analysis…

CREATION OF B PILLAR AND THEIR ATTACHMENT FEATURES USING THE GIVEN MASTER SECTION AND PERFORM DRAFT ANALYSIS ON ON EACH FEATURE CREATION OF TOOLING AXIS first the tooling axis for the given class a without flange is created the tooling axis is created using the dog house referance lines and a point inbetween the lines…

QUICK RETURN MECHANISM ASSEMBLY INDIVIVUAL PARTS 1.FIXIN PIN then fixing pin is created using pad  and boolean operation is used to create the part in assembly it acts as a fixing point 2. GUIDER this is created using sketch and pad\ in assembly it act as a guider for the x and y direction pins 3.Y DIRECTIN PIN this…

BECHMARKING This simply mean comparision first the desired product specification and cost are determined then the available products in the desired range in the market are taken to compare each other and the features for the developing product are inferred from the comparision and betterment for the product is also made…

                                                                                           …

COMPLETE DESIGN OF HOOD ASSEMBLY USING THE MASTER SECTION AND ASSEMBLIN WITH PROPER POSITION OF LATCH AND STIKER AND GIVING REINFORCEMENTS AND FOLLOWING THE STANDARDS OF DIFFERENT APPROACH INTRODUCTION           The hood is the outer cover of an engine in a car and is and it…

                                                          FENDER WHEEL ARC CALCULATION FENDER a fender is the cover for the wheels of the car it protects the pedestrians as well…

FRONT FENDER DESIGN INTODUCTION Front fender is a covering part for the tyre and i protects the car as well as pedestrians from mud, stone scaterring from the tyre in ancient times full bumper type is used and in this type the blank wastage is more and now half bumper type is used and the blank wastage is also reduced…

DESIGN OF BACK DOOR(TAILGATE) USING CATIA V5   Introduction:       The back door is simply door at the back side of the car and the door design varies with different segment and purpose here back door of a SUV model has been taken and in SUV type the rear door is streamlined and is not like sedan class and designing a…

section modulus calcultion and design optimization for better section modulus for hood assembly section modulus concept defenition        section modulus is value used to understand at a particular section of body the force taking abily before the yielding and we can also say that section modulus is…

DESIGN OF CAR ROOF WITH REINFORCEMENTS USING NXCAD Introduction         the roof is the top cover of a car it has significance in various perspective of a car and they are in performance and efficiancy of a car as it affects the air resistance and it also plays a importance in satfety ratings of…