File Parsing : Different Organisations comes up with polynomials that can be used to evaluate different properties for different environments for ex. in case of thermodynamics such as Cp, H and S. They also create a document file for the co-efficients that are required to evaluate these polynomials, for n no. of species.…

What is 2nd Order ODE's?    A Differential Equation is an equation with a function and one or more of its derivatives. Order The Order is the highest derivative.                     Now, this works in Engineering: In Engineering, ODE is used to describe the transient…

Otto cycle: automobiles The Otto cycle is the name for the cycle used in spark-ignition internal combustion engines such as gasoline and hydrogen fuelled automobile engines. Its theoretical efficiency depends on the compression ratio r of the engine and the specific heat ratio γ of the gas in the combustion chamber.Thus,…

Stalagmite Function: Stalagmites represents the 3D pointed formations that arises from the floor. Like cones but may or may not be pointed always. With refrence to data here, Stalagmites are the 3D curves formations because of data we gave and it helps finding the threshold value of a parametres.    It creates…

The Rankine cycle is a model used to predict the performance of steam turbine systems. The Rankine cycle is an idealized thermodynamic cycle of a heat engine that converts heat into mechanical work while undergoing phase change. It is an idealized cycle in which friction losses in each of the four components are neglected.…

Project Report of same: https://projects.skill-lync.com/projects/Solving-2nd-Order-ODE-Simulating-Pendulum-in-MATLAB-62728 Output : Youtube link of simulation: https://youtu.be/mQSUfUuPPcM

Like here we see some technical terms so lets understand that first ie. Kinematics, Forward Kinematics, Robotics Arm, and does 2R denotes for robotic arm. Kinematics (geometry of motion):The branch of mechanics concerned with the motion of objects without reference to the forces which cause the motion.A kinematics problem…

Curve fitting: Curve fitting is the process of constructing a curve, or mathematical function, that has the best fit to a series of data points, possibly subject to constraints. Curve fitting can involve either interpolation, where an exact fit to the data is required, or smoothing, in which a "smooth" function is constructed…

1. Total weight of various types of aircrafts. Type                                                                            MTOW…

Aim: Meshing and providing connections to Suspension Assembly. Procedure: Firstly, we need to arrange a CAD model with good quality for doing all these tasks. It is provided to us already and it should be in provided formats only (i.e. step, iges, stl) so that it is workable in ANSA workbench.  Now before starting…

Aim: Meshing the provided model of Instrument Panel Substrate. Procedure: Before doing any operation on provided model it is always better to know little about it. So, instrument panels are often made of acrylonitrile-butadiene-styrene (ABS), ABS/polycarbonate alloys, polycarbonates, polypropylene, modified polyphenylene…

Aim: Study the behaviour of provided model with and without changing the material properties of it and also see how can we control animation using engine 0001.rad file for the same model. Procedure: Now, to study all these behaviour of model in radioss we need a starter file i.e. 0000.rad and engine file i.e. 0001.rad…

Aim: Study the behaviour of provided model using different material laws and failure models along with material laws and concluding which case be best for on-field scenario. Procedure: Now, we already know from earlier project i.e. Assignment 3 what we need to access model in radioss and how to proceed with starter…

Aim: Meshing the provided component and later analyzing results by making several changes in solver configurations. Procedure:  Now, as we know first we need to do mesh on the provided model to make it ready for analysis. And to start with mesh one should always check for geometric errors first in the model. So our…

Aim: Frontal Crash Simulation Procedure: In this project, we need a car model and it should be a solver deck file ( 0000.rad and 0001.rad). So in our case, we have used BIW of a car only. A complete file will be too big to handle and take more processing time. So to start analyzing the result for the frontal crash…

Aim: Side Pole Crash Simulation Procedure: In this project, we need a car model and it should be a solver deck file ( 0000.rad and 0001.rad). So in our case, we have used BIW of a car only. A complete file will be too big to handle and take more processing time. So to start analyzing the result for the side crash we need…

Aim: Mesh the provided model for given parameters and then connect each component by the relevant connector asked. Target Element size - 5 Units S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2 Units 6 Max. Length 8 Units…

What is Battery ? Batteries are a collection of one or more cells whose chemical reactions create a flow of electrons in a circuit. All batteries are made up of three basic components: an anode (the '-' side), a cathode (the '+' side), and some kind of electrolyte (a substance that chemically reacts with the anode and…

Aim: Mesh the side door of the car model for given quality criteria and assign thickness.  Quality Criteria -  Target Element Length = 4 Units S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2 Units 6 Max. Length 6 Units…

Aim: Mesh the side door of the car model for given quality criteria and assign thickness.  Quality Criteria -  Target Element Length = 5 Units S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2 Units 6 Max. Length…

 1. Three test cases from harness dashboard of design and test lithium-ion BMS algorithms model. We have to change the test cases option from the block name Test Sequence Variant shown in the image. It has 3 selections named 1,2, and 3. 1 means Balancing, 2 means charging and 3 means driving. a) Balancing From the…

Working Principle of Lead Acid Battery When the sulfuric acid dissolves, its molecules break up into positive hydrogen ions (2H+) andsulfate negative ions (SO4—) and move freely. If the two electrodes are immersed in solutions andconnected to the DC supply then the hydrogen ions being positively charged and moved…

Aim: Compare 3S4P AND 4P3S battery pack configurations and comment on the results. Procedure: Firstly we need to decide upon which battery block to use out of all available battery blocks in MATLAB. Selection is basically based upon the input parametrs we need to use and the output we want from the model.  Based on…

1. Thermal Management Techniques for EV Electric vehicles (EVs) develop fast and have become popular due to their zero-emission and high tank-to-wheels efficiency. However, some factors limit the development of the electric vehicle, especially the performance, cost, lifetime and safety of the battery. Therefore, the management…

Electric vehicles (EV), Single battery cells are serially and parallelly connected to make a battery stack to achieve higher voltage and capacity. However, the charging and discharging process need to stop as soon as any cell reaches its maximum limit or working threshold (below the absolute threshold). Due to this,the…

What is a Fuel cell:                                                       A fuel cell is an electrochemical cell that converts the chemical energy of a fuel (often hydrogen)and an oxidizing…