Illustration of a bare steel SUV body shell held in a welding fixture by clamps and locating pins, with two orange robot arms spot-welding the side sill
Courses / BIW

BIW design courses online

Every Skill-Lync course on car-body panel design, sheet-metal closures and BIW welding fixtures, with fees, hours, projects and our own placement data.

8
courses
₹40,000
per short course
9,100+
student BIW reports
2.7 LPA
median BIW-titled offer in our records

As of 19 Nov 2026 · Fees are the list price on each course page, inclusive of all charges

Skill-Lync teaches BIW in 8 online courses: 6 short courses (car-body panels in NX, sheet-metal closures in CATIA V5 or NX, and BIW welding fixture design) and 2 PG programs built around them. Here they all are with fees, hours and projects, the sheet-metal and fixture maths they start with, which one fits the job you want, and our own BIW placement numbers.

Every Skill-Lync course that teaches BIW

CourseLevelDurationProjectsFee
Automotive BIW Design and Development Part 1 using NXCADShort course8 weeks2₹40,000
Automotive BIW Design and Development Part 2 using NXCADShort course8 weeks4₹40,000
Automotive BIW Fixture Design using CATIA V5Short course12 weeks2₹40,000
Introduction to BIW Fixture Design using CATIA V5Short course12 weeks1₹40,000
Automotive Sheet Metal Design using CATIA V5Short course12 weeks4₹40,000
Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5Short course12 weeks4₹40,000
Post Graduate Program in BIW Fixture and Plastic DesignPG program24 weeks18₹2,75,000 · EMI from ₹14,375/mo
Post Graduate Program on Automotive BIW Design and DevelopmentPG program24 weeks11₹2,75,000 · EMI from ₹14,375/mo

Projects is the number of industry projects listed on the course page. Programs also include the courses' smaller assignments. EMI figures are the lowest monthly plan shown on the course page.

How much does a BIW design course cost in India?

As of 17 Nov 2026, other providers' BIW design courses range from ₹15,000 (Swashrit Aikyam) to ₹19,596 (Isopara). Skill-Lync's options in this table cost ₹40,000 to ₹2,75,000, inclusive of all charges, with graded projects and doubt support; the programs add placement support.

Provider and courseFeeDurationFormat
Swashrit Aikyam BIW Part Design₹15,000, shown against a struck-out ₹18,000180 days of accessRecorded self-paced videos and PDF notes on a Graphy course app
Isopara Master BIW Product Design Course with PG, Diploma & Advanced CAD TrainingShown as ₹19,596 to ₹27,394No total statedOnline, flexible or classroom (the page lists all three)
Skill-Lync Automotive BIW Design and Development Part 1 using NXCAD₹40,000 incl. all charges8 weeksOnline: recorded lessons, live doubt sessions, graded projects
Skill-Lync Automotive BIW Fixture Design using CATIA V5₹40,000 incl. all charges12 weeksOnline: recorded lessons, live doubt sessions, graded projects
Skill-Lync Post Graduate Program on Automotive BIW Design and Development₹2,75,000 incl. all charges24 weeksOnline: recorded lessons, live doubt sessions, graded projects
IFS Academy (Pune) BIW Welding Fixture Design using CATIANot stated60 hours (compact) or 80 hours (full course)Online instructor-led live training, or classroom in Pune
CADDESK Hyderabad BIW Fixtures CourseNot stated4 monthsClassroom in Hyderabad or online

Read from each provider's own course page on 17 Nov 2026, sorted by fee: free first, then rupee fees, then fees in US dollars, then pages that show no fee. Some providers include GST and many don't say. Free courses usually charge for the certificate. For certificates, placement support and how to choose, see the full comparison: Best BIW design course in India (2026).

Which one should you pick?

  1. You want to design car-body panels. Start with Automotive BIW Design and Development Part 1 using NXCAD (8 weeks, 8 h of video, ₹40,000): architecture, materials and stamping, then a hood and a roof in NX. Follow it with Automotive BIW Design and Development Part 2 using NXCAD (24 h, 4 projects): rear door, side body, side door and engine compartment, plus the floor and joining. Part 2 is three times the video of Part 1 at the same fee.
  2. You only want closures, in CATIA or NX. The two Automotive Sheet Metal Design courses teach the same syllabus (hood, fender, roof, doors, lock and striker, two supplier case studies, 4 projects each): the NX version has 18 h of video, the CATIA V5 one 12 h. Pick the CAD tool the companies you are applying to use; both are ₹40,000.
  3. You want fixture or tooling jobs. Automotive BIW Fixture Design using CATIA V5 (12 weeks, 17 h, ₹40,000) goes from the 3-2-1 principle to unit design, pneumatics and gun study to full 2D detailing and BOM, with a robot welding fixture and a manual welding fixture project. Skip Introduction to BIW Fixture Design using CATIA V5: it is the first 3 sessions of the same course (4 h of video; the catalogue counts 1 project but names none) at the same fee.
  4. You want a full BIW program with crash. The Post Graduate Program on Automotive BIW Design and Development (24 weeks, 92 h, 11 projects, ₹2,75,000, EMI from ₹14,375 a month) bundles BIW Parts 1 and 2, the fixture course and Crashworthiness Analysis using HyperMesh and Radioss (frontal, side-pole and roof-crush load cases on a Dodge Neon model). Choose it if you want to see how the panels you design behave in a crash.
  5. You want fixtures plus plastics. The Post Graduate Program in BIW Fixture and Plastic Design (24 weeks, 18 projects, ₹2,75,000) combines sheet-metal closures, the fixture course, automotive plastic design, advanced sheet metal in NX and mold design in SOLIDWORKS: a wider design-and-tooling profile for supplier companies.
  6. You want BIW inside a broader design program. One sheet-metal or fixture course is also inside the PG Programs in CAD, Complete Passenger Car Design, Automotive Design using CATIA V5 and Manufacturing Design, and the Pre-Graduate Program in Engineering Design. They are on the automotive design courses page.

What is BIW?

Body in white (BIW) is a car's body shell after the sheet-metal panels are stamped and welded together, before paint, trim, glass, wiring or the powertrain go in. It is the floor, the side bodies with their A-, B- and C-pillars, the roof with its rails and bows, the front structure around the engine compartment, and, depending on the company, the closures: hood, doors, fenders and tailgate. It carries the crash loads, sets the body's stiffness and decides how every other system is mounted.

BIW design engineers design those panels in CAD (CATIA V5 or Siemens NX in most Indian OEMs and service companies): inner and outer panels, reinforcements, flanges for spot welds, hemming of closures, and the master sections that show how panels meet. Every panel has to be stampable (draft, radii, no undercuts), weldable (flange widths that a weld gun can reach), and has to meet gap-and-flush, sealing and pedestrian-safety requirements. BIW fixture engineers design the jigs that hold those panels in place while robots or operators weld them.

Here is the sheet-metal arithmetic panel designers use every day. Take a hypothetical 0.8 mm steel panel with a 90° flange, an inside bend radius of 2.0 mm and a K-factor of 0.4 (the neutral axis sits 40% of the way into the thickness). The bend allowance, the arc length of the neutral axis, is (π/2) × (2.0 + 0.4 × 0.8) = 3.64 mm. If the drawing gives the flange legs as 15 mm and 40 mm to the outside corner, each leg is 2.8 mm (the inside radius plus the thickness) longer than its flat part, so the blank before bending is 15 + 40 − 2 × 2.8 + 3.64 = 53.04 mm, a bend deduction of 1.96 mm. Change K to 0.33 and the bend allowance becomes 3.56 mm, only 0.09 mm shorter: for one bend the K-factor barely matters, but over a panel with dozens of flanges it adds up, which is why companies fix K per material and thickness in the CAD sheet-metal defaults.

And the rule every fixture course starts with, 3-2-1. A rigid part has six degrees of freedom: three translations and three rotations. Three rest pads on the main face stop it moving down and tilting about two axes (3); a round locating pin in a round hole, called a 4-way pin, stops the two sideways translations (2); a pin in a slot, a 2-way pin, stops the last rotation (1). 3 + 2 + 1 = 6. Thin car-body panels sag between three points, so BIW fixtures add more rests and clamps on the main face, a scheme called N-2-1, while keeping one 4-way and one 2-way pin so the part is never over-constrained in its plane.

What a BIW course covers

  1. Vehicle architecture and materials. Car sub-assemblies, crumple and crush-proof zones, steel grades (mild, HSS, AHSS, UHSS), aluminium, magnesium and composites, the vehicle development process, platforms and top hats, and benchmarking.
  2. Closures and outer panels. Hood, fender (wheel arch), roof (bow and rail positions), side and back doors and tailgate: design and functional requirements, Euro NCAP pedestrian rules, gap and flush, sealing, latch and striker, and hinge positioning.
  3. Body structure. Side body from the Class-A surface (A-pillar, B-pillar, quarter panel, sill), dash, frame, floor and tunnel (DFFT), and the engine compartment: rails, suspension and bumper mounting, and load paths.
  4. Manufacturing and joining. Stamping, deep drawing and forming; spot welding, arc welding and clinching; rubber seals; and design for manufacturing on supplier parts, including a case study converting a cast aluminium tailgate inner to a deep-drawn steel part.
  5. BIW fixture design. Jigs vs fixtures, BIW stations, the 3-2-1 principle and body planes, pin, clamp, rest, dump, slide and base units, pneumatic routing, valve banks, weld gun study, sensors, then 2D detailing with GD&T, child parts, bill of materials and bill of process sheets.

The courses in detail

Automotive BIW Design and Development Part 1 using NXCAD

Short course8 weeks8 h of video₹40,000

Vehicle architecture, BIW materials (MS to UHSS, aluminium, magnesium, composites), the vehicle development process, benchmarking and stamping, then hood, fender and roof design in Siemens NX.

Projects include: Design of Hood; Design of Roof.

Tools: Siemens NX CAD

Automotive BIW Design and Development Part 2 using NXCAD

Short course8 weeks24 h of video₹40,000

Rear door, side body (A- and B-pillars, quarter panel, sill), side door, dash-frame-floor-tunnel, joining (spot and arc welding, clinching), rubber seals and the engine compartment, in Siemens NX.

Projects include: Design of Rear Door; Design of Side Body; Design of Side Door; Design of Engine Compartment.

Tools: Siemens NX CAD

Automotive BIW Fixture Design using CATIA V5

Short course12 weeks17 h of video₹40,000

BIW welding fixtures in CATIA V5: jigs vs fixtures, the 3-2-1 principle, pin, clamp, rest, dump and slide units, pneumatics, weld gun study, then 2D detailing, BOM and process sheets.

Projects include: Designing a Robot Welding Fixture; Designing a Manual Welding Fixture.

Tools: CATIA V5

Introduction to BIW Fixture Design using CATIA V5

Short course12 weeks4 h of video₹40,000

The first three sessions of the BIW fixture design course: BIW nomenclature, fixture types and stations, welding processes, the 3-2-1 principle and design methodology. About 4 hours of video.

Tools: CATIA V5

Automotive Sheet Metal Design using CATIA V5

Short course12 weeks12 h of video₹40,000

Car-body closures in CATIA V5: hood, fender, roof, side and back doors (requirements, regulations, gap and flush), lock and striker, and two supplier-part case studies.

Projects include: Designing of Hood; Designing of Fender Drip Area; Designing of Roof Assembly; Designing of Tailgate.

Tools: CATIA V5

Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5

Short course12 weeks18 h of video₹40,000

Car-body closures in Siemens NX: hood, fender, roof, side and back doors (requirements, regulations, gap and flush), lock and striker, and two supplier-part case studies.

Projects include: Designing of Hood; Designing of Fender Drip Area; Designing of Roof Assembly; Designing of Tailgate.

Tools: Siemens NX CAD

Post Graduate Program in BIW Fixture and Plastic Design

PG program24 weeks82 h of video₹2,75,000

Five courses: automotive sheet-metal closures, BIW fixture design, automotive plastic design, advanced sheet metal in NX and mold design in SOLIDWORKS.

Projects include: Designing a Robot Welding Fixture; Designing a Manual Welding Fixture; Designing of Hood; Designing of Fender Drip Area.

Tools: CATIA V5, Siemens NX CAD, SOLIDWORKS

Post Graduate Program on Automotive BIW Design and Development

PG program24 weeks92 h of video₹2,75,000

BIW Design Parts 1 and 2 in Siemens NX, BIW fixture design in CATIA V5, and crashworthiness in HyperMesh and Radioss (frontal, side-pole and roof-crush load cases).

Projects include: Designing a Robot Welding Fixture; Designing a Manual Welding Fixture; Frontal Crash of a NEON Dodge Model in FMVSS Regulation; Side Pole Impact Analysis of NEON Dodge Model in FMVSS Regulation.

Tools: CATIA V5, HyperMesh, Radioss, Siemens NX CAD

Jobs after a BIW course

Typical job titles: BIW design engineer, BIW product design engineer (closures, underbody or upper body), sheet-metal design engineer, BIW fixture design engineer, tool and fixture designer, body engineering trainee or GET. Employers are car and commercial-vehicle makers' body teams, engineering services companies that design bodies and fixtures for global OEMs, and fixture and welding-line builders.

From Skill-Lync's own placement records (as of 19 Nov 2026): 17 learners placed in 2021 to 2023 have a job title that names BIW or fixtures, such as BIW design engineer, BIW fixture engineer or GET (BIW fixture design). 16 reported a salary: median 2.7 LPA, middle half 2 to 3.5 LPA. Employers in those records include Tech Pennar (4), Expleo (2), Hirotec India, Hinduja Tech, Tata Elxsi, Intelizign, Segula Technologies and Alten. Most came through the PG Program in CAD, not a BIW-only course.

Learners of the PG Program in BIW Fixture and Plastic Design, any job title: 23 placement records (2020 to 2023), 21 with a salary, median 3.75 LPA, middle half 3 to 5.5 LPA. Cyient hired 5 of them; others went to Tata Technologies, Magna Steyr, Hyundai Motor India and Intelizign. See design engineer salaries and recent placements.

These are self-reported offers from learners who told us they were placed, mostly from 2021 to 2023, so treat them as a starting point, not as today's market rate. The samples are small (17 and 23 records).

BIW projects students built

Skill-Lync learners have published more than 9,100 completed car-body and BIW fixture reports (2,118 students) as of 19 Nov 2026. We count only reports whose title names the panel or the fixture task; plastic trims, crash and meshing work are left out. The most common: fenders and wheel arches (3,149), hoods (1,996), back doors and tailgates (1,657), roofs (1,647), BIW fixture design challenges (719).

Four to read: a roof designed with bows and rails in NX, the fender wheel-arch challenge, an engine compartment and BIW fixture design methodology answers. More on the CATIA project ideas page.

Free BIW lessons before you pay

Each Skill-Lync BIW course has free lessons you can watch without signing up, plus a free full fixture workshop:

Free BIW tutorials

Start here before you pay for anything. These are written by Skill-Lync learners and engineers:

Before you pay

Compare hours, not weeks. Every short course here costs ₹40,000, but they range from 4 h of video (Introduction to BIW Fixture Design using CATIA V5) to 24 h (Automotive BIW Design and Development Part 2 using NXCAD). Hours and reviewed projects are what you pay for.

Don't buy the introduction to fixtures. Introduction to BIW Fixture Design using CATIA V5 covers the first 3 sessions of Automotive BIW Fixture Design using CATIA V5 (4 h against 17 h) at the same fee; the catalogue counts 1 project for it but names none. Take the full course.

The two sheet-metal courses are the same course in two CAD tools. Do not take both. Several PG programs also contain one of them, so check a program's course list before adding a short course on top.

You need CAD at home. Siemens Designcenter Student Edition is a free NX download for Windows, and CATIA for Students costs US$60 a year (both checked 17 Nov 2026). Check what your college lab has before you buy anything, and do not learn on a cracked copy: companies check.

BIW jobs are mostly in service companies and fixture builders, at fresher pay. Our own records put the median BIW-titled offer at 2.7 LPA (n = 16). A short course alone rarely gets the job; a portfolio of panels with master sections and a fixture with full detailing does. Ask the counsellor for recent BIW placements before you pay for a program.

BIW course FAQs

What is the fee for a BIW design course at Skill-Lync?

As of 19 Nov 2026: each of the 6 BIW short courses is ₹40,000, and the two BIW PG programs are ₹2,75,000 each (EMI from ₹14,375 a month). Fees are inclusive of all charges.

Which BIW course should I take first?

Automotive BIW Design and Development Part 1 using NXCAD: vehicle architecture, materials, the development process and stamping, then a hood and a roof in NX. If you want fixture or tooling roles instead, start with Automotive BIW Fixture Design using CATIA V5.

What is the difference between BIW design and BIW fixture design?

BIW design is designing the car body's sheet-metal panels: inner and outer skins, reinforcements, flanges and how panels join. BIW fixture design is designing the welding jigs and fixtures that locate and clamp those panels on the assembly line while they are welded. Panel design jobs sit in OEM and service-company body teams; fixture jobs sit in fixture builders, welding-line integrators and the tooling teams of service companies.

What is the 3-2-1 principle in fixture design?

A part has six degrees of freedom. Three rest points on the main face remove three (one translation, two rotations), a round pin in a round hole removes two translations, and a pin in a slot removes the last rotation: 3 + 2 + 1 = 6. Thin car-body panels use N-2-1: more than three rests on the main face so the panel does not sag, still with one round and one slot pin.

Which software is used for BIW design?

CATIA V5 and Siemens NX are the main CAD tools for BIW panels and fixtures in India; Skill-Lync's BIW Parts 1 and 2 use NX, the fixture courses CATIA V5, and the sheet-metal course comes in both. Crash and stiffness checks of BIW use HyperMesh with Radioss or LS-DYNA, taught in the PG Program on Automotive BIW Design and on the CAE courses.

What is the salary of a BIW design engineer in India?

In Skill-Lync's own records (as of 19 Nov 2026), 16 learners placed in BIW- or fixture-titled roles from 2021 to 2023 reported a median of 2.7 LPA, middle half 2 to 3.5 LPA. It is a small, self-reported sample of fresher offers; experienced BIW engineers earn more.

Can I learn BIW design for free?

You can learn the basics free: the free lessons from each Skill-Lync BIW course, the free BIW fixture workshop on YouTube, and Siemens' free NX student edition to practise panels. A paid course adds reviewed projects, master sections and mentor feedback on your panels, which is what an interview portfolio needs.

Get the syllabus and fee plans

Talk to a counsellor.

Tell us your branch and year. We will send the syllabus for the BIW course that fits and explain the payment plans.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.