Full course · free on YouTube · 54 min

BiW and the vehicle development process: free webinar, 54 minutes

This is a Skill-Lync webinar recording published in February 2023, about 54 minutes long, given by a BiW instructor. The first 37 minutes explain BiW, its structure and how its sheet-metal parts are made. The last 17 minutes walk through the vehicle development process from targets and benchmarking to prototype, start of production and customer feedback.

25 chapters · published 13 Feb 2023 · 12,875 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and automotive students and early-career engineers who want to see how a car programme moves from concept to start of production, and where the body in white (BiW) design work sits in it.

What will you learn?

  • List the four stages of the vehicle development process and what each one produces
  • Explain benchmarking and a carryover study, and why carmakers reuse proven parts
  • Describe how level 1 and level 2 CAD relate to CAE feedback and manufacturing review
  • Say what a design freeze is and why suppliers are approached after it
  • Place BiW in the build sequence: Ed coating, paint, powertrain assembly, testing
  • Tell body on frame from monocoque construction and name the main BiW parts

What does each part of the course cover?

7 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

  1. 0:0012 min · 5 chapters

    Where BiW sits in the car and what it must do

    The instructor sets the agenda (BiW, its manufacture, then the vehicle development process) and explains which parts count as body in white (the sheet-metal parts, not fasteners, glass or the powertrain). BiW is described as the sheet-metal skeleton that carries the subsystems, protects occupants in NCAP-type tests and keeps noise out.

    Chapters
    • 0:00Introduction and agenda
    • 1:22What counts as a BiW part: sheet-metal parts, not fasteners, glass or the powertrain
    • 4:47What the BiW has to do: carry the subsystems, withstand loads, shape and weight
    • 7:13Safety ratings (NCAP) and pedestrian protection as BiW design goals
    • 8:24Comfort, noise and vibration, leg room and driver visibility
  2. 11:3315 min · 4 chapters

    Body on frame, monocoque and the main BiW parts

    Compares body on frame, used for SUVs and trucks that need suspension and load capacity, with monocoque (unibody) construction used in passenger cars. Then groups BiW into five structure categories and names the pillars, dash panel, roof, fenders, cross member, floors and tunnel.

    Chapters
    • 11:33Two architectures: body on frame and monocoque (unibody)
    • 16:26The five BiW structure groups of a monocoque body
    • 16:56Component names: A to D pillars, dash panel, windshield, roof, fenders
    • 21:06Cross member, underbody shields, firewall, floors, tunnel and wheel arch
  3. 26:2012 min · 5 chapters

    Sheet metal, stamping and the assembly sequence

    Shows that BiW is the car as it leaves the Ed coating, before paint, powertrain and electrical fitting. Covers sheet-metal design rules, stamping, forming and deep drawing, the order in which body parts are assembled, and why a design engineer must know how a part is made.

    Chapters
    • 26:20Where BiW ends in the build: the Ed coating stage
    • 27:02Sheet metal considerations for automotive parts
    • 29:28Manufacturing: stamping, forming and deep drawing
    • 32:15Press tools, assembly order and the line from paint to final testing
    • 36:14What a BiW design engineer must know beyond CAD
  4. 37:596 min · 5 chapters

    Vehicle development process: pre-design, benchmarking and carryover

    Introduces the four stages of the process: pre-design and development, design engineering, development engineering and start of production with sales. The pre-design phase covers market targets, a concept sketch, benchmarking against the best competitor and reusing proven parts through a carryover study.

    Chapters
    • 37:59Vehicle development process: the four stages
    • 38:37Pre-design phase: market targets and first concept
    • 39:27Benchmarking against the best competitor vehicle
    • 41:33Carryover study: reusing proven parts from earlier cars
    • 43:25Benchmarking 2: stripping down competitor vehicles
  5. 44:133 min · 2 chapters

    Design engineering: level 1 and level 2 CAD with CAE feedback

    Concept designers hand over a surface and engineers build level 1 CAD, split across people by part. Level 2 adds holes, embosses and assembly features, while CAE crash simulation and a manufacturing feasibility review feed changes back until the teams agree.

    Chapters
    • 44:13Design engineering: level 1 CAD from concept surfaces
    • 46:03Level 2 CAD, CAE feedback and manufacturing review
  6. 47:075 min · 3 chapters

    Design freeze, suppliers, prototype and start of production

    Once every team is satisfied the CAD is frozen and the OEM approaches suppliers for quotes. Physical prototype testing follows the earlier virtual testing, then design validation against the target market's standards, pre-production and start of production (SOP).

    Chapters
    • 47:07Design freeze, suppliers and vendors, and OEM sourcing
    • 49:00Prototype 1 and physical testing
    • 50:25Design validation, pre-production and start of production
  7. 51:473 min · 1 chapter

    After the sale: customer feedback closes the cycle

    The talk ends on what happens after launch: the company keeps collecting customer feedback, JD Power is named as a scoring and survey company, and the findings go into the next car, so the process returns to setting targets.

    Chapters
    • 51:47After the sale: customer feedback, JD Power scoring and the cycle restarting

Is the Introduction to BiW and the Vehicle Development Process course really free?

Yes. All 54 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 13 Feb 2023 and had 12,875 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Introduction to BiW and the Vehicle Development Process course take to finish?

The video runs 54 min across 25 chapters. At one hour a day that is about 1 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Body on frame, monocoque and the main BiW parts" (15 min), so give it its own days.

Does the free BiW design course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Automotive BIW Design and Development, Part 1, using NX CAD (free lessons), then Automotive BIW Design and Development Part 1 using NXCAD (₹40,000), then Post Graduate Program on Automotive BIW Design and Development (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

What are the stages of the vehicle development process?

The instructor names four: pre-design and development, design engineering, development engineering, and start of production with sales and marketing. Pre-design sets targets, a concept and benchmarks. Design engineering builds CAD. Later steps cover suppliers, prototype testing, validation and start of production (SOP), then customer feedback.

What is a carryover study in car development?

The webinar describes it as reusing parts from an earlier, well-performing vehicle rather than designing everything new. Examples given are an engine compartment that already earned a good pedestrian safety rating, and door hinges and latches taken from previous cars. The aim is to avoid new investment, since the exterior changes most.

Why is a car's CAD built in levels?

Level 1 CAD is the concept-stage model, with different people designing the hood, fender or engine compartment and the parts merged into one car. Level 2 and later add holes, embosses and assembly features, using CAE feedback and manufacturing review. The speaker says CAD is frozen when every team is satisfied.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Introduction to BiW and the Vehicle Development Process and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Introduction to BiW and the Vehicle Development Process course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.