BiW fixture design with CATIA V5: free workshop, 1.7 hours
This is a Skill-Lync workshop recording published in April 2023, about 1 hour 45 minutes long. The first hour covers BiW, fixture types, tooling and the project workflow, then degrees of freedom and the 3-2-1 principle, fixture units, a CATIA walkthrough of a panel fixture, and a Q&A.
23 chapters · published 30 Apr 2023 · 12,502 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and automotive design students and early-career engineers who want to understand what a body-in-white fixture is, how it locates and clamps sheet-metal panels, and what its units look like in CATIA.
What will you learn?
- Explain what body in white (BiW) is and name the main BiW part groups
- Tell a jig from a fixture and name production, pre-production and checking fixtures
- Describe geo, respot and hemming tools, checking stations and the grippers used on a BiW line
- Count the 12 degrees of freedom of a free body and show how locators, pins and clamps restrain them
- Choose between a fixed pin unit and a retractable pin unit from the loading and unloading directions
- Recognise pin, clamp, rest, locator and base units, and shim packs, in a CATIA fixture model
What does each part of the course cover?
8 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:0018 min · 4 chapters
Body in white and why a fixture is needed
Defines BiW as the stage where sheet-metal parts are welded into the vehicle structure, between welding and painting, and contrasts body-on-frame with a welded body. Lists the BiW part groups, then asks what is needed to hold two parts for spot welding and introduces jigs versus fixtures.
- 18:0111 min · 5 chapters
Fixture design factors and the three fixture types
Covers what a fixture must provide: locating elements, light clamping that does not dent the panel, resistance to tooling forces, safety and rigidity. Then separates production, pre-production and checking fixtures, using a hood sub-assembly sequence and the CMM as examples.
- 28:5310 min · 2 chapters
Tooling on a BiW line and grippers
Describes geo tools, respot tools, hemming fixtures and checking stations, with the 0.15 mm geo-pin tolerance example on a 25 mm hole. Then explains grippers: material-handling, process, combo and dual types, and how they differ from fixtures.
- 38:3914 min · 3 chapters
Fixture project workflow
Walks through the stages of a fixture job: the purchase order, customer inputs (functional requirements, preferred standards, standard components, car product data, layout, ergonomics), progress by percentage of completion, and design outputs including unitised tools.
- 52:4816 min · 3 chapters
Degrees of freedom and the 3-2-1 principle
Counts the degrees of freedom of a free body as six translation directions and six rotation directions, 12 in all. Then works on a whiteboard to restrain them: three base locators, a round pin, a second pin and top clamps, and how round and diamond pins act in holes and slots.
- 1:09:0310 min · 3 chapters
Fixture units
Names the units that make up a fixture: pin unit with retainer, shim packs for tolerance stack-up, riser and block. Explains when to use a fixed pin unit and when a retractable pin unit, based on whether loading and unloading directions are the same.
- 1:19:2119 min · 2 chapters
CATIA walkthrough of a car-panel fixture
Opens fixture assemblies in CATIA for a car panel and shows the pin, clamp, rest and base units, shim directions, colour coding of holes and the pneumatic supply. Returns to round and diamond pins and grippers when asked.
- 1:37:587 min · 1 chapter
Questions and answers
Answers questions on how clamping force is decided from the weight of the component and the cylinder pressure the customer specifies, what geo pins and respot pins do, the CMM, and when to use a fixed or retractable pin unit.
Chapters
- 1:37:58Questions: clamping force, geo pins, respot pins, CMM
Is the Automotive BiW Fixtures Overview and Design using CATIA V5 course really free?
Yes. All 1 h 45 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 30 Apr 2023 and had 12,502 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Automotive BiW Fixtures Overview and Design using CATIA V5 course take to finish?
The video runs 1 h 45 min across 23 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "CATIA walkthrough of a car-panel fixture" (19 min), so give it its own days.
Does the free BiW fixture design course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Introduction to BIW Fixture Design using CATIA V5 (free lessons), then Automotive BIW Fixture Design using CATIA V5 (₹40,000), then Post Graduate Program in BIW Fixture and Plastic Design (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
What is the 3-2-1 locating principle in fixture design?
The speaker counts 12 degrees of freedom for a free body (six translation directions and six rotations) and restrains them in steps. Three base locators stop downward movement and tilting. Two pins in the panel's holes stop sliding and turning in the plane. Clamps close the remaining upward movement.
When do you use a fixed pin unit and when a retractable one?
The speaker's rule: if the panel is loaded and unloaded in the same direction, a fixed pin unit works. If loading and unloading directions differ, a fixed pin would trap the panel after welding, so one pin is retracted with a cylinder before unloading. Pin units also carry shims to absorb tolerance stack-up.
Do I need CATIA V5 to follow this workshop?
The video does not state a licence or prerequisite. The speaker asks the audience what BiW means at the start, so it assumes little. The CATIA part is a walkthrough of existing fixture models, hiding and showing units, rather than a step-by-step modelling exercise, so you can follow it without the software.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course