Automotive sheet metal design: free workshop, 73 minutes
A single 73-minute recorded live workshop from Skill-Lync, taught with slides and images and first published in February 2019. It covers car body types and BIW, the vehicle development process, then hood, fender, roof, back door and side doors one by one, with questions answered in the chat.
29 chapters · published 2 Feb 2019 · 1,34,306 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and automobile engineering students who want to see what body-in-white sheet metal design involves, beyond CAD modelling, before choosing a career in automotive design.
What will you learn?
- Tell body-on-frame from monocoque construction and say what BIW (body in white) includes
- Describe the four stages of vehicle development and where benchmarking and carryover parts fit
- Explain why outer panels get inner panels and reinforcements, and why a hinge or striker needs its own reinforcement
- Compare the hood, fender, roof and back door by the requirement that drives each, such as frontal crash, anti-chipping and rollover
- Compare steel and aluminium for a back door, including the part-count and weight argument
- Say what master sections, gap and flushness, hemming and spot welding are used for
What does each part of the course cover?
7 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:0011 min · 6 chapters
Design versus engineering, car body types and BIW
The speaker separates CAD drafting from engineering, then explains body-on-frame versus monocoque, where the floor panel itself acts as the frame, and names hatchback, sedan, SUV, MUV and crossover. Body in white (BIW) is defined as the upper body, closures and floor together, with steel and aluminium compared on weight.
- 11:1712 min · 5 chapters
Vehicle development process and benchmarking
The four stages are pre-design and development, design engineering, development engineering and start of production. Benchmarking against competitors, concept preparation, carryover parts, two or three levels of CAD, CAE feedback, supplier feedback and prototype builds are explained with Nissan Micra and bike-buying examples.
- 23:4015 min · 5 chapters
Hood and fender
The hood section covers the outer panel, the inner panel and reinforcements for hinge and striker, frontal crash and active versus passive hoods. The fender section covers the wheel arc gap, anti-chipping protection and mounting, then a Q&A on bolt sizes and outer versus inner panel materials.
- 39:099 min · 3 chapters
Roof, concept sheet and master sections
Using the roof, the speaker shows a concept sheet that fixes where a part is made, its material, its thickness and the variants it is used on. Master sections cut through the car set the head clearance and visibility, the 3D model follows them, and scrap from the body side outer can be reused.
- 48:357 min · 3 chapters
Back door: steel versus aluminium, hinge and latch
The steel back door has an outer panel, an inner panel and reinforcements for the hinge, gas stay, latch and wiper motor. A cast aluminium inner panel replaces several reinforcements with one part. A GIF then shows how hinges and the latch and striker work.
- 55:558 min · 3 chapters
Side doors, body side and gaps
Side doors are tied to the body side. Integrated header, separate header and header reinforcement doors follow the car budget, and sashless doors are covered for convertibles and coupes. The centre pillar carries the seat belt retractor, and gap and flushness values are set by the project team.
- 1:04:129 min · 4 chapters
Suppliers, field concerns and Q&A
Glass and mechanism parts usually go to suppliers, and customer complaints lead to temporary and permanent countermeasures. The Q&A covers Tesla sashless doors, aluminium versus steel, welding and hemming for doors, and what the speaker says employers need beyond CAD modelling.
Is the Automotive Sheet Metal Design course really free?
Yes. All 1 h 13 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 2 Feb 2019 and had 1,34,306 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Automotive Sheet Metal Design course take to finish?
The video runs 1 h 13 min across 29 chapters. At one hour a day that is about 2 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Hood and fender" (15 min), so give it its own days.
Does the free sheet metal design course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Automotive Sheet Metal Design using NX CAD / CATIA V5 (free lessons), then Automotive Sheet Metal Design using Siemens NX CAD / CATIA V5 (₹40,000), then Post Graduate Program on Automotive BIW Design and Development (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
What is the difference between body-on-frame and monocoque?
In the workshop, body-on-frame has a rigid, reinforced frame underneath with the body panels built on it, which makes the car heavier and suits lorries, bigger vans and pickups. A monocoque integrates the body with the floor panel, which itself acts as the frame, so the car weighs less and spreads forces for passenger safety.
Do I need CAD software or experience for this sheet metal workshop?
The video does not state prerequisites and does not demonstrate any software. It is a slide-based talk. In the closing Q&A the speaker says CAD tools such as CATIA, NX or Pro/E have similar icons with the same purpose, and that the engineering reasoning matters more than learning one tool.
Why does a hood or door have an inner panel as well as an outer panel?
The speaker says the outer skin is thin, about 0.75 to 0.8 mm, and cannot give the strength alone, so an inner panel is added like stacking several sheets of paper. Reinforcements are then added where hinges, strikers or latches remove strength locally. The fender is a smaller part and needs no inner panel.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course