Fundamentals of BiW: free webinar, 49 minutes
This is a Skill-Lync webinar recording published in February 2023, about 49 minutes long, given by an engineer with over 10 years in BiW. The first half covers what BiW is, its zones, components and steel grades, then design, load cases, fabrication, welding and fixtures. The rest is a Q&A on materials, software, doors and weight.
28 chapters · published 8 Feb 2023 · 15,026 views as of 19 Nov 2026 · by Skill-Lync
Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗
Who is this course for?
Mechanical and automotive students and early-career engineers who want a plain overview of what a body in white is, how it is divided into parts, and how it is designed and joined.
What will you learn?
- Define body in white and name its three zones: under body, upper body and closures
- Tell monocoque, space frame and body-on-frame construction apart
- Name the main BiW parts, such as the A, B and C pillars, door rings, wheel houses and roof cross members
- Read a colour-coded steel-grade map of a body and say why different areas use different strengths
- Describe the load cases a BiW is designed for: road loads, braking, crash and torsion
- Compare spot welding, riveting, bonding and laser joining, and say what fixtures do on a BiW line
What does each part of the course cover?
7 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.
- 0:006 min · 3 chapters
What BiW is and what it has to achieve
The instructor introduces the agenda (introduction, BiW components, fabrication, fixture design), then defines BiW as the welded, bolted steel and sheet-metal shell of the car. Requirements covered are load transfer, NVH, crashworthiness against a mobile progressive deformable barrier (MPDB), strength, stiffness, light weight and aerodynamics.
- 6:165 min · 6 chapters
Construction types and the three BiW zones
Compares monocoque, space frame and body-on-frame construction, with trucks, buses and older SUVs as body-on-frame examples. Then splits the BiW into under body, upper body and closures, walking through the engine compartment, front and rear floor, tunnel, body sides, roof, doors, hood, trunk lid and fender.
Chapters
- 6:16Construction types: monocoque, space frame, body on frame
- 7:35The three BiW zones: under body, upper body, closures
- 8:22Under body: engine compartment, floors, tunnel, fuel tank area
- 9:18Upper body and how crash loads travel through the pillars
- 10:06Closures: hood, doors, trunk lid, fuel lid, fender
- 10:56Under body zones in more detail: motor, centre and rear, rocker panels
- 11:458 min · 5 chapters
Pillars, roof members, steel grades and first Q&A
Names the pillars, door rings, wheel houses, quarter panels and roof cross members, and why a panoramic roof needs none. Shows a colour-coded body by steel strength, from mild steel to ultra high strength steel and aluminium. Answers whether BiW can be cast.
- 20:145 min · 3 chapters
BiW design process and load cases
Follows a car from the styling team and clay model to class A surfaces, which the designer cleans of tangency and connectivity errors before building inner panels. Then covers road loads from the wheels, braking, pitching, crash and torsion, and the design stages: shape and crash optimisation, benchmarking.
- 25:306 min · 3 chapters
Fabrication, joining methods and fixtures
Lists the fabrication methods: stamping, deep draw, blanking, piercing, trimming, presses and welding. Compares resistance spot welding, manual and robotic spot welding, riveting, bonding, laser brazing and laser welding, then introduces positioning, welding and checking fixtures for mass production.
- 31:3210 min · 3 chapters
Q&A: why BiW is called that, composites, braking, joining, spot welds, buses
The instructor explains the name BiW and the CED paint stage, why composites are not used for high-volume cars, how braking loads reach the suspension towers, and why welding is preferred over riveting or bonding. Also covers supercars versus family cars, spot-weld testing and tubular bus bodies.
- 41:268 min · 5 chapters
Q&A: CAD software, careers, sunroofs, doors and weight
Answers which CAD packages carmakers use for BiW (CATIA and Unigraphics, depending on the company's PLM), whether a quality engineer can move into product design, and how the roof changes with a panoramic sunroof. Then compares panel, sash and sashless doors, and the paint-baking and coating question on weight.
Is the Fundamentals of BIW course really free?
Yes. All 49 min of it is free on Skill-Lync's YouTube channel, with no payment. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 8 Feb 2023 and had 15,026 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.
How long does the Fundamentals of BIW course take to finish?
The video runs 49 min across 28 chapters. At one hour a day that is about 1 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Q&A: why BiW is called that, composites, braking, joining, spot welds, buses" (10 min), so give it its own days.
Does the free BiW design course come with a certificate?
The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.
What should I learn after this course?
The next step is Automotive BIW Design and Development, Part 1, using NX CAD (free lessons), then Automotive BIW Design and Development Part 1 using NXCAD (₹40,000), then Post Graduate Program on Automotive BIW Design and Development (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.
Which software is used to design BiW?
The instructor says it depends on the carmaker and its PLM system. Major companies use CATIA or Unigraphics (the older name of Siemens NX). Renault is given as a CATIA user, and Ford is described as migrating to NX. The speaker adds that the skill matters more than the package, and that expertise in either one is enough.
Why is a whole car body not made by casting?
The instructor gives three reasons: casting has a long lead time and needs huge, costly machines, a small defect means the part is rejected so yield is low, and the tool stays occupied while the part cools. Tesla is cited as casting some parts, such as the suspension tower zone, but not the complete body.
Why does a panoramic sunroof car have no roof cross members?
The webinar explains that roof cross members stop the roof sheet from fluttering and carry loads across the body. With a panoramic sunroof the glass panel is stiff and framed, so one large member joins the sides and the glass is fitted on top, instead of several cross members.
Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube video on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course