Full course · free on YouTube · 2 h 40 min

BIW fundamentals bootcamp (2021): free, 2 parts, 2 hours 40 minutes

Two recorded sessions of a live Skill-Lync bootcamp from June 2021, 79 and 81 minutes, taught over slides, a whiteboard and factory videos with questions from the chat. Part 1 covers the body structure, closures and the factory sequence. Part 2 covers joining: welding, hemming, mechanical fasteners, adhesives and sealers.

41 chapters · 2 parts · published 30 Jun 2021 · 1,39,170 views as of 19 Nov 2026 · by Skill-Lync

Free. We ask for your name and phone once before it plays here · or watch on YouTube ↗

Who is this course for?

Mechanical and automotive engineering students who want a slower, question-driven walk through a car body shell, its closures and how its sheet metal parts are joined.

What will you learn?

  • Name the three segments of a body shell (underbody, upper body, closures) and what belongs to each.
  • Explain what A, B, C and D pillars, the cantrail and the shotgun do, and why torsional stiffness matters.
  • Describe why the fender is bolted, and what gap and flush and negative flush mean at the fuel door.
  • Follow the factory order from press shop to body assembly, paint, trim and chassis lines and inspection.
  • Compare spot, seam and laser welding, and say why two and three metal stacks are used but not four.
  • Tell flat hem from open hem, and explain where mastic, hem adhesive and body sealer are applied.

What does each part of the course cover?

14 sections, in watching order. Click a timestamp to jump the player there. The video description has no chapter list, so these chapters and timestamps were written from the video itself.

Part 1 · 1 h 19 min

  1. 0:006 min · 3 chapters

    What BIW is and its three segments

    A chat poll on what BIW means, the session outline, and a definition: the assembled sheet metal body shell, mostly steel, ready for painting and dipped as a whole. The body is then split into underbody, upper body and closures, with hood, doors, fuel lid and tailgate as the closures.

    Chapters
    • 0:00Audience poll and what BIW means
    • 2:38Session outline and BIW as a dipped body shell (CED)
    • 4:10Three segments: underbody, upper body, closures
  2. 6:2613 min · 4 chapters

    Upper body: body side outer, pillars and roof

    The body side outer as the largest styling component, split in two or three pieces for strength, and NCAP regulations as a design driver. Then the A, B, C and D pillars, a picture-frame example of torsional stiffness, roof bows, rain drip channel and why the cabin needs an air exhaust.

    Chapters
    • 6:26Upper body and the body side outer
    • 8:23NCAP regulations and the underbody as the strongest zone
    • 10:58A, B, C and D pillars and torsional stiffness
    • 15:03Rear quarter panel, roof bows, rain drip channel and body exhaust
  3. 19:547 min · 2 chapters

    Upper body steels and the cantrail

    Why the roof can use lower-yield steel while the B pillar sees side and pole impact, how laser-welded and hot-stamped two-part pillars keep an expensive steel to the part that needs it, and why the cantrail is shaped to deform in a planned direction.

    Chapters
    • 19:54Upper body steel grades, laser welding and hot stamping
    • 23:21The cantrail and programmed deformation
  4. 27:1816 min · 4 chapters

    Closures: hood, doors, tailgate, fender and fuel door

    Why closures are separate from the welded body, door and hood opening tests, the primary and secondary hood lock, programmed deformation of the hood, how door beams pass frontal load to the pillars, why the fender is bolted, and gap and flush at the fuel door with a negative flush.

    Chapters
    • 27:18Closures: hood, doors, fuel door, tailgate and fender
    • 29:09Door and hood opening tests, primary and secondary hood lock
    • 32:41Hood deformation, door beams and load transfer, rear crash
    • 36:57Why the fender is bolted, tolerances, fuel door gap and flush
  5. 43:2414 min · 3 chapters

    Underbody key components

    The underbody as the performance and crash-load area, with shotgun, front wheelhouse, shock tower, dash and firewall, cowl top, floor assembly, cross members that carry the seats, the floor tunnel, kicker panel, sill, rear apron and seat support members, plus a whiteboard session on shotgun, apron and kick panel.

    Chapters
    • 43:24Underbody: shotgun, shock tower, dash, cowl top
    • 47:11Floor assembly, cross members, tunnel and kicker panel
    • 52:11Questions: shotgun, rear apron, kick panel and dash
  6. 57:367 min · 3 chapters

    From sheet metal to a finished car, and BIW sub-assemblies

    The factory order: press shop, body assembly, paint, trim and chassis lines, inspection and shipping. Then how the underbody, body sides, roof and closures are built from sub-assemblies, a Renault Logan example, and questions on fuel tank position, painting doors off the body and software used.

    Chapters
    • 57:36Factory sequence: press shop to shipping
    • 1:00:21Underbody, body side, roof and closure sub-assemblies
    • 1:03:24Questions: chassis fitting, fuel tank, painting doors, CAD software
  7. 1:04:4714 min · 2 chapters

    Videos: stamping and how a car door is made

    Screen-shared videos on press-shop stamping with a punch and die, then a car door from rolled sheet: draw, trim, piercing, spot welding of the window frame and beams, adhesive instead of welds between outer and inner panel, trim and chassis fitting of the door, and gap and flush checks on the hood.

    Chapters
    • 1:04:47Video walk-through of parts, stamping dies and the stamping process
    • 1:12:01Video: how a car door is made, hood gap and flush, BIW assembly animation

Part 2 · 1 h 21 min

  1. 0:004 min · 3 chapters

    Recap and the three families of joining

    A recap of day one: closures, pillars, factory sequence and assembly order. A chat poll on welding types leads to the split of joining into welding, mechanical fasteners and adhesives, with spot, seam and laser welding under welding, and TIG kept mainly for aluminium frames.

    Chapters
    • 0:00Recap of day one
    • 2:47Joining in BIW and a poll on welding types
    • 3:47Welding, mechanical fasteners and adhesives
  2. 4:2915 min · 4 chapters

    Spot welding: nugget, two and three metals, no four

    How a spot weld forms between two electrodes under pressure, the nugget size set by the gun tip, why two-metal and three-metal stacks are used but not four, and the notching workaround. It also covers a stack limit for a regular gun and spot welding versus MIG.

    Chapters
    • 4:29Spot welding principle and gun types
    • 5:35Inside a spot weld: pressure, grain flow and the nugget
    • 11:05Two-metal and three-metal stacks, and why not four
    • 16:18Spot welding versus MIG, aluminium, notching four layers
  3. 19:3714 min · 2 chapters

    Seam welding and laser welding

    Seam welding on thick parts such as axles and suspension towers, and a worked area comparison with spot welds. Then laser welding for joining two steel grades or thicknesses before forming, as in the B pillar and roof, why it looks cleaner than arc weld, and why spot welding stays the first choice on cost.

    Chapters
    • 19:37Seam welding and its load capacity
    • 25:28Laser welding, cost and the design engineer's role
  4. 33:267 min · 2 chapters

    Welding in the plant: robots, manual guns and gun access

    Projection welding, roller seam welding, manual and robotic guns, and industry videos of robot cells. The instructor explains gun access holes, why a design may change when a robot cannot reach a weld, how robot welds are checked, and how plants mix fully robotic, hybrid and manual lines.

    Chapters
    • 33:26Projection and roller welding, manual and robotic guns
    • 38:40Checking robot welds and robotic versus manual lines
  5. 40:0011 min · 2 chapters

    Mechanical fasteners and hemming

    Flat hem and open hem, 2T and 3T hems, why closure edges are hemmed so that no sharp edge is left, and how mastic is placed before open hemming, then closed by machine. Also rivets, bolting for repairable parts and projection welding, with a roll-hemming video of a tailgate and doors.

    Chapters
    • 40:00Flat hem, open hem and rivets
    • 47:31Roll hemming video and hemming steps
  6. 50:4819 min · 5 chapters

    Adhesives, sealers and coatings

    Hem adhesive, body sealer on corners and edges, mastic adhesive in the hood, door and trunk to stop vibration, over-hem sealer, interior adhesive, direct glazing for glass with its black border, weld-bond adhesive, wax-type stone-chip coating, underbody coating and the defogger wires on rear glass.

    Chapters
    • 50:48Hem adhesive and body sealer
    • 52:31Mastic adhesive in hood, door and trunk
    • 55:19Over-hem, interior, glazing and weld-bond adhesives
    • 1:01:41Stone-chip coating and mastic adhesive questions
    • 1:07:12Direct glazing, rear defogger and underbody coating
  7. 1:10:1411 min · 2 chapters

    Recap videos and materials in a multi-material body

    A recap of the welding videos, then a bonus video on a body that mixes steel, aluminium sheet, profiles and castings, carbon fibre and magnesium. The load path in front and side impact is shown, and the joining method for each area: spot, laser and MIG welding, bonding, riveting, clinching, hemming and friction element welding.

    Chapters
    • 1:10:14Recap with robotic welding line videos
    • 1:14:18Materials, load paths and joining methods in a multi-material body

Is the Fundamentals of BIW bootcamp (2021, 2 parts) course really free?

Yes. All 2 h 40 min of it is free on Skill-Lync's YouTube channel, with no payment, in 2 parts. To watch it on this page with the chapter guide, leave your name and phone number once; you can also watch it directly on YouTube. It was published on 30 Jun 2021 and had 1,39,170 views as of 19 Nov 2026. This page adds the chapter guide, a study plan and what to learn next.

How long does the Fundamentals of BIW bootcamp (2021, 2 parts) course take to finish?

The video runs 2 h 40 min across 41 chapters. At one hour a day that is about 3 days; plan roughly twice that if you practise each exercise as you go. The longest section is "Adhesives, sealers and coatings" (19 min), so give it its own days.

Does the free BIW design course come with a certificate?

The video description has a "claim your certificate" link, which now opens this page. To ask about a certificate for this course, leave your name and phone number in the form below and a Skill-Lync counsellor will call you back. The paid Skill-Lync courses linked here include a certificate along with mentor-reviewed projects.

What should I learn after this course?

The next step is Automotive BIW Design and Development, Part 1, using NX CAD (free lessons), then Automotive BIW Design and Development Part 1 using NXCAD (₹40,000), then Post Graduate Program on Automotive BIW Design and Development (₹2,75,000). The free course teaches the concepts; the paid Skill-Lync courses add graded projects, mentor feedback and, in the PG programs, placement support.

Do I need CAD or welding experience for this BIW bootcamp?

The recording starts with a chat poll on what BIW means and explains each term as it comes up: pillars, closures, hemming and sealers. It is taught over slides, a whiteboard and videos, with no software demo. The speaker mentions that companies use NX, CATIA or SolidWorks, but none is needed to follow the session.

Why is there no four-metal spot weld in a car body?

In part 2 the instructor says a regular gun is limited to a stack of about 4.5 mm and that two or three metal layers are used. With four layers the centre can blow out at high voltage, or not fuse at lower voltage. Parts are notched so each weld joins fewer layers.

What does negative flush mean at a fuel door?

In part 1 the instructor explains gap and flush at the fuel door: the body side outer sits slightly proud and the fuel door slightly below it, so water runs off instead of entering the gap. The tolerance quoted in the session is 0 to minus 0.5 mm. It is also kept flush to reduce aerodynamic drag.

Last updated 19 Nov 2026 · Course length, chapters, views and dates from the YouTube videos on 19 Nov 2026 · Grow by Skill-Lync: free lessons from every course

Finished the course?

Ask about the certificate or your next course.

Leave your name and phone number. A Skill-Lync counsellor calls you back within one working day about the certificate for Fundamentals of BIW bootcamp (2021, 2 parts) and the course that fits where you want to work.

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.

Free full course · Skill-Lync

Start watching

Free, no payment. Leave your name and phone once and the whole Fundamentals of BIW bootcamp (2021, 2 parts) course plays here, with every free lesson on Grow. A Skill-Lync counsellor may call you about the certificate or your next course.

By submitting you agree to our Terms and Privacy Policy.

Talk to a career counsellor

Talk to a career counsellor

Free 20-minute call. We'll map the right course to where you want to work.

By submitting you agree to our Terms and Privacy Policy.