Design a Gun with some mechanism.

Files are attached Below

Aim Design a Gun with some Mechanism in any CAD Software Introduction                                                           In my Project I try to take reference from…

Aim To define electrical property of the given componend. Objective To download the given CAD file and their respective compactable part from te.com. Then to define the Electrical properties correctly and to create catalogues of the components so that it can be used later. SOLUTION METHODOLGY Defining the connector  We…

1. Battery Ignition Switch Current Voltage regulators  Distributter Breakers  Fuses Switches  Juntion Box Accesories such as Tail Lamp, Head lamp, Indicators, wipers, A/c, Sterios etc.  2. Battery Batteries are widely employed in order to power small electric devices such as mobile phones, remotes,…

Aim Assemble and apply GD&T to the butterfly valve assembly drawing Introduction Butterfly Valve is a mechanical componend used to control the flow of fluid in different application in different areas. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it…

MODELLING OF SHEET METAL BRACKET-2 OBJECTIVE Modelling a Sheet Metal Bracket using NX CAD. Write a detailed report on Sheet Metal Component with good explanation on Sheet Metal modelling tools applied throughout the modelling. Also attach the Final model Images of Sheet Metal Bracket. INTRODUCTION Sheet metal is metal…

MODELLING OF SHEET METAL BRACKET OBJECTIVE Modelling a Sheet Metal Bracket using NX CAD. Write a detailed report on Sheet Metal Component with good explanation on Sheet Metal modelling tools applied throughout the modelling. Also attach the Final model Images of Sheet Metal Bracket. INTRODUCTION Sheet metal is metal formed…

MODELLING OF SHEET METAL ODD ENCLOSURE OBJECTIVE Write a detailed report on Sheet Metal Component with good explanation on Sheet Metal modelling tools applied throughout the modelling. Also attach the Final model Images (Min.4 images) of Sheet Metal Odd Shaped Enclosure. INTRODUCTION NX sheet metal environment can be used…

MODELLING OF SHEET METAL BOX   OBJECTIVE In this challenge we are going to modelling a sheet metal BOX using Siemens NX CAD and also a detailed explain about the sheet metal tools used for the operation. DESIGN METHODOLOGY DESCRIPTION CREATE SKETCH FOR BASE THEN TAB WITH 1MM THICKNESS USE FLANGE TO CREATE THE WALL…

MODELLING OF SHEET METAL CASING   OBJECTIVE In this challenge we are going to modelling a sheet metal Casing using Siemens NX CAD and also a detailed explain about the sheet metal tools used for the operation. DESIGN METHODOLOGY DESCRIPTION Create new file of sheet metal model  Then set the Sheet metal preference…

                               AUTOMOTIVE DESIGN OF BACK DOOR USING SIEMENS NX CAD                                           AIM Use the…

Aim Provide appropriate dimensions and check for Draft analysis. Do a curvature study on the roof and perform calculations to determine the position of the Bow-roofs. Develop the reinforcements as separate parts Introduction An automobile roof or car top is the portion of an automobile that sits above the passenger…

Aim Use the Section from your Hood design and calculate the Section Modulus using the formula  S = I/y  Where,  S = Section Modulus I = Moment of Inertia y = distance between the neutral axis and the extreme end of the object  Observation Calculation From the above observation we get  MOI=9.249463064e+07=92494630.64mm^4…

Aim Calculate the Wheel Arch gap at required points and check whether the car passes the European standard. Introduction A fender is the part of a car, truck, motorcycle, or other vehicles that frames or covers a wheel well. Its main purpose is to prevent debris, rocks, mud, liquids, sand, and other road…

Aim In this project we are going to design the mounts for the Front fender such as drip, sill, bumper, A-pillar, cowl and baffle for this we are going to design mounts. Introduction A fender is the part of a car, truck, motorcycle, or other vehicles that frames or covers a wheel well. Its main purpose is to prevent debris,…

AIM Design Hood Outer Panel, Inner Panel and the necessary reinforcements by following the Master Section mentioned with the Design parameters explained in the videos. Submit an ASSEMBLY of Hood Inner Panel, Outer Panel, Latch, Hinge and the Reinforcements. A detailed report about the Hood Design which includes a detailed…

                                                                             UNDER_BODY COATING AIM Report on Topic 'Under-Body…

1)Mr. D.S. Pughazhyendhii's family consist of 5 members so it is better to have a SUV catagories car. And another thing is he have daily use of car and have monthily trip to palany which is 500 km away from banglure and more over banglur is city too so its is better to have a hybyid SUV vehicle.He have a monthly income…

Development of a Door Trim panel Aim Creation of CAD model considering following inputs as like in OEM and tier1 companies    Class A surface  Nominal thickness : Refer master sections  Attachment strategy Introduction We know in automobile industries plastic places a major role in reducing the weight…

Picture of the sketches with Sketch solving status’s geometry tab Picture of the Detailed tree structure. Picture of the 3D CAD Create closed body    REPORT In Development of the master section we can able to develop the part using the mastersetion dimension. It is actually like a plan that we use to build…

Report  Step-1 Open part design and create the 2D diagram provide to solid parts.  Step-2 Then done complete assemply by coping the part to product. Then with help of contrain tools Assemply is done.  Step-3  By using the save managemnt save all .product file and .part file in a single folder 

Screenshots of the completed design in various orientations (Isometric, Front, Side, and Top View). Report A detailed report should be done explaining the draft analysis and the tooling axis creation.  Select the draft analysis then select the quick analysis mode then select the compass to the tooling axis, after…

Screenshots of the completed design in various orientations (Isometric, Front, Side, and Top View) Report A detailed report should be done explaining the draft analysis and the tooling axis creation.  Select the draft analysis then select the quick analysis mode then select the compass to the tooling axis, after that…

Screenshots of the completed design in various orientations (Isometric, Front, Side, and Top View) Report A detailed report should be done explaining the draft analysis and the tooling axis creation.  Select the draft analysis then select the quick analysis mode then select the compass to the tooling axis, after that…

Screenshots of the Draft analysis report for both the switch bezel plastic component Screenshots of the core and cavity blocks in various orientations (Isometric, Front, Side, and Top View) Report A detailed report should be done explaining the draft analysis and the tooling axis creation.  Select the draft analysis…

Screenshots of the Draft analysis report for both the given Class-A surface and the final plastic component DRAFT ANALYSIS OF CLASS A  FINAL PLASTIC  DRAFT ANALYSIS OF THE FINAL PLASTIC Screenshots of the solid model with the proper color code of the draft angle in various orientations (Isometric, Front, Side,…

Screenshots of the Draft analysis report for both the given Class-A surface and the final plastic component. Screenshots of the solid model with the proper color code of the draft angle in various orientations (Isometric, Front, Side, and Top View) Report A detailed report should be done explaining the draft analysis and…

Screenshots of the Draft analysis report for both the given Class-A surface and the final plastic component Class A surface Drafft analysis Draft Analysis of final plastic component Screenshots of the solid model with the proper color code of the draft angle in various orientations (Isometric, Front, Side, and Top View)…

Screenshots of the Draft analysis report for both the given Class-A surface and the final plastic component Image of the complete Draft analysis  Images of the color scale variant   Screenshots of the solid model with the proper color code of the draft angle in various orientations (Isometric, Front, Side, and…

AIM The main goal of this project is to understand the functionality of a P1 hybrid and be able to model it. INTRODUCTION As from the name Hybrid Electric Vehicle, we know that the vehicle is powered using both IC Engine and Electric motor which helps to get great fuel efficiency. By the position of the electric motor…

AIM Development of a forward energy-based fuel consumption model of a conventional vehicle. Introduction Conventional vehicle means any self-propelled, motorized vehicle designed for transporting persons or property on a public highway and must be registered. Conventional vehicles use an internal combustion engine works…

Report Aim of the project The main aim of the project is system level study and stimulation the BAJA -ATV model. And also, we study about the components used, detailed study of the vehicle model and stimulation in cooperate with the CVT and some key take away. AVT (All-Terrain Vehicle)          …

  Report-1 Given data Check electric supply condition Then water supply condition Socking -200 sec (0-200sec) Washing-100sec(200-300sec) Rinsing -20 sec(300-320sec) Drying -50sec(320-370sec) completed Components of Washing machine The important component are inner drum, the valve, the pump, and the heating elements.…

DOORBELL STIMULATION USING SIMULINK   Simulink model explanation: - Pulse generator block DC Battery Switch block Solenoid block Ideal transitional motor sensor block Mechanical transitional reference Electrical reference block Scope PS-Simulink & Simulink-PS converter Block diagram explanation: - Pulse Generator is used…

REPORT Rankine Stimulator Rankine cycle consist of four processes as follows. Process 1-2: Reversible adiabatic expansion in the turbine (or steam engine). Process 2-3: Constant-pressure transfer of heat in the condenser. Process 3-4: Reversible adiabatic pumping in the feed pump. Process 4-1: Constant-pressure transfer…

FUNCTION CODE-1 %specific heat ,Enthalpy,Endropy calculation function[Cp,H,S]=inputs(T,R,Tm1,c1,c2,c3,c4,c5,c6,c7,c8,c9,c10,c11,c12,c13,c14) for i=1:length(T) if T(i)>Tm1 Cp=(c1+c2.*T+c3.*T.^2+c4.*T.^3+c5.*T.^4).*R; H=(c1+(c2.*T)./2+(c3.*T.^2)/3+(c4.*T.^3)./4+(c5.*T.^4)./5+c6./T).*T.*R; S=(c1.*log(T)+c2.*T+(c3.*T.^2)./2+(c4.*T.^3)./3+(c5.*T.^4)./4+c7).*R;…

GENETIC ALGORITHM USING MATLAB FUNCTION CODE %define stlagmite function function [f] = get_stalagmite(input) x = input(1); y= input(2); % Detailed explanation goes here f1 =(sin(5.1.*pi.*x+0.5)).^6; f2 =(sin(5.1.*pi.*y+0.5)).^6; f3 =exp(-4.*log(2).*(x-0.0667).^2/0.64); f4 =exp(-4.*log(2).*(y-0.0667).^2/0.64); f = -(f1.*f2.*f3.*f4);…

 Main program %solving second order ODEs of a pendulum clear all close all clc %input b=0.05; %daming coefficient g=9.81; %gravity(m/s^2) l=1; %length of spring(meter) m =0.1; %mass of the bob(kg) %initial condition %angular displacement is 0 and angular velocity is 3 theta_0 = [0;3] %time point %pendulum ocsilation…

https://youtu.be/An4N-vXRK40 %program for forward kinematics of 2R robotic arm manipulator animation clear all close all clc %input %length of the arm l1 = 1; l2 = 0.5; %Angle of of both links with respect to horizondal axis theta1 = linspace(0,90,10); theta2 = linspace(0,90,10); %program ct=1 for i=1:length(theta1) THETA1=theta1(i);…