MODELLING OF AMERICAN CHOPPER IN SOLIDWORKS   INTRODUCTION In this project, we are to learn the entire modeling of an American chopper on solid works. This software is mainly used to model 3D parts using 2D sketches. It also has material appearances look for the model which we create and apply the exact material for…

1. Radar Mast  ISOMETRIC VIEW FRONT VIEW RIGHT SIDE VIEW FEATURE MANAGER TREE       2. Yacht Assembly ISOMETRIC VIEW FRONT VIEW     FEATURE MANAGER TREE       PROJECT REPORT   MODELLING OF YACHT ON SOLIDWORKS   INTRODUCTION In this project, we are to learn the…

OBJECTIVE Creating the tooling axis for the given Fan cover model meeting the requirements of the draft angle and performing the Draft analysis on the model. DETAILED REPORT: 1) CHECKING CONTINUITY OF A GIVEN CLASS-A SURFACE:          We have to check the continuity of a given class A surface to…

AIM: Creating the Base Bracket Plastic component through the given Class-A surface, and performing the draft analysis on the model. OBJECTIVE: The objective of the challenge is to create a base bracket design along the solid part body from class A surface in CATIA surface workbench and part design. 1. INPUT CLASS A SURFACE:…

AIM: Creating the Switch Bezel Plastic component through the given Class-A surface and perform draft analysis on the model. OBJECTIVE: The objective of the challenge is to create a Switch Bezel Plastic design along the solid part body from class A surface in CATIA surface workbench and part design. To create a class B…

AIM: To create the core and cavity blocks for the switch bezel with the parting surface and parting line. CORE AND CAVITY DESIGN: The core is the part that forms the internal shape of the molding. The cavity is the part that forms the external shape of the molding. The core is the side of the tool where the plastic part…

AIM: To create the Coin Holder Plastic component through the given Class-A surface and add the thickness and perform the draft analysis on a solid surface. OBJECTIVE: The objective of the challenge is to create a Coin Holder Design along the solid part body from class A surface in CATIA surface workbench and part…

AIM: Create the rib for the Centre console coin holder and consider the design rules as mentioned. OBJECTIVE: Create a Rib for the center Console Coin holder. Perform draft analysis. RULES FOR RIB DESIGN: RIB DESIGN: Ribs and gussets are features that generally are added to the primary wall of a plastic part for structural…

AIM: Create the boss and Dog House for the Centre console coin holder and add thickness and generate the draft analysis on a solid surface of the final component. OBJECTIVE: CREATING SCREW BOSS CREATING DOG HOUSE Perform a draft analysis CREATING SCREW BOSS: To create the screw boss, draw the sketch on the extracted base…

AIM: Create the Door Applique Plastic component through the given Class-A surface. To begin with, the tooling axis for the given Class-A Surface should be created meeting the requirements of the draft angle and at the end perform the Draft analysis on the model.  OBJECTIVE: Creating tooling axis Creating Class-B surface…

AIM: To create a solid body of B pillar cover including ribs and locators by using given Class-A surface. OBJECTIVE: Tooling Axis creation To create B surface To create a C surface To create a solid part Draft analysis Create a dog house Create a 4-Way locator Create a Rib. GIVEN CLASS A SURFACE: First I need to check…

AIM: We Have to create 2 Assembly parts before we need to create all individual parts to assemble. OBJECTIVE: ASSEMBLY 1: QUICK RETURN MECHANISM ASSEMBLY 2: CV JOINT ASSEMBLY 1: QUICK RETURN MECHANISM: We need to create all 5 parts individually Creation of part 1: CREATION OF PART 2: CREATION OF PART 3: CREATION OF PART…

AIM: To create a door interior part from the inputs of class A surface along with master section by following the design rules followed in tier 1 and OEM industries in CATIA v5 SOFTWARE USED: CATIA V5 OBJECTIVES: Create a sketch by using a Positioned sketch All the should be sketching should be 'so-Constrained Ensured…

AIM: Creation of Door Arm Rest component through the given Class-A surface and perform draft analysis on the model. and ADD Thickness of 2.5mm. OBJECTIVE: The objective of the challenge is to create a Door Arm Rest design along the solid part body from class A surface in CATIA surface workbench and part design. To create…

                                                                    DESIGN OF CASING USING NX CAD OBJECTIVE: Design a sheet metal casing using NX…

                                                                               Designing of Box Assembly   OBJECTIVE:…

                                                                            DESIGN OF SOLID PUNCH IN NX CAD OBJECTIVE:-…

                                                                     DESIGN A BRACKET USING NX CAD OBJECTIVE:          …

                                                                 DESIGN OF SHEET METAL BRACKET-II USING NX CAD OBJECTIVE:- • To understand the 2d drawing…

AIM: Create 1D elements on the following component with the given cross-section and DOF. Specification: a. Rod element:- Translational DOF should be Constrained with RBE2 link Cross-Section: BOX- Dimension a= 12 mm                               dimension b=10 mm                               Thickness t= 0.75 mm b. Beam…

                                                                                Meshing of Hood Aim: To extract mid-surface…