2D MESHING FOR SHEET METAL COMPONENT   AIM :-   Preparation of car hood model for finite element analysis which include geometry cleanup and mid surface generation and meshing under quality criteria S.No   Quality Criteria                Value  1        Target/Average length     …

                                                                                           …

i completed my tool test

                                                                                          …

i have completed 3d meshing of manifold

                                                                                           …

                                                                                          …

                PROJECT 1: EXTRACT MIDSURFACE AND MESH THE DASHBOARD SUB-PARTS AIM: To extract the mid surface and mesh the component with given quality parameters and assign thickness respectively. OBJECTIVE: The main focus of this project is to…

                                                                                           …

                    Meshing and Creating 1D Element by Using Hyperworks - Optistruct solver   AIM: The main objective of the Challenge is to mesh the given component called Bracket with a target length of 5mm and to make the 1D elements like Rod, Beam, and Bar with…

  AIM : mesh the following components individually and follow the quality criteria of mesh as per given data.                                      OBJECTIVE : import the following geometry file and check for solid…

  AIM :- The aim of this challenge is to convert the given SI unit values of given quantities to all different parameters  & also to prepare consistent unit system table for different unit system.   OBJECTIVE :- The objective of this challenge is to convert the given values of the quantity to different system of units.…

  AIM :- understand the implicit and explicit scheme so that we can use in our FEA model properly.   EXPLAINATION :-   time integration methods can be broadly classified into two categories                                                            …

                                                                                              3D Tetra Meshing Challenge     Aim :-     To perform 3D/Volume mesh on given components as per quality criteria.   Introduction :-  Tetramesh is a 3-D type of mesh. When we talk about the 3-D mesh, Tetramesh is more preferable…

                                          CREATING  1D  CONNECTORS  IN  HYPERMESH    …

                                                DROP TEST OF PHONE(POLYCARBONATE MATERIAL)…

                                                                                                                  …

                                                                                                        …

               Calculate the Stretch Ratio by comparing the ELFORM (-2,-1,1,2) with Ogden_Material Model.   AIM:  To perform the simulation using ELFORM = 1, 2, -1, -2 and calculate the stretch ratio.   SOFTWARE: LS-Dyna   OBJECTIVE: 1)…

                                               JOINT CREATION AND DEMONSTRATION   OBJECTIVE…

                                    PEDESTRAIN HEAD IMPACT SIMULATION USING LS-DYNA   AIM: To perform the Head Impact Simulation and calculate the Head Impact Criterion (HIC) value for the following cases. Simple head model impacting against rigid wallChild headform dummy model impacting against rigid wallChild headform…

                                                             …

    AIM: To create a material model using the data extracted from the given true stress-strain curve of graphite iron casting and validate it using the dog bone specimen.Note: The unit system used is kg-mm-ms. INTRODUCTION: To get realistic results for any analysis using FEA, a good material model for the material…

                           HYPERELASTIC MATERIAL MODELLING AND VALIDATION     AIM : To perform the simulation and validate the curve(STRAIN VS STRESS) as shown in the figure OBJECTIVE :…

        Aim: In this project, we have performed the bird strike analysis using Lagrange formulation. The bird is simplified in this case because shell element is used and material used for bird is elastic material. Except that everything is kept quite similar to actual bird strike simulation.  …

AIM: To create a 2D mesh in the side door plastic component according to the quality criteria, and apply thickness to the mesh. QUALITY CRITERIA: S.N Quality Criteria  Value  1 Aspect Ratio  5 2 Skewness 45 3 Warping 15 4 Taper      0.5 5 Min. Length 2mm 6 Max. Length 6mm 7 Min angle…

                                               MESHING OF REAR WHEEL HOLDER   AIM:- To  extract a mid surface…