1) Calculate the Concrete Mix Design for M35 grade concrete with fly ash Aim: To calculate the concrete mix design proportioning for M35 grade concrete with fly ash replacing of cement. Introduction: The concrete mix design of M35 graded concrete with replacing the fly ash designate with using of several code books in…

Sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction. Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding loads from the members…

1) Aim: To draw a P-1 drawing using AutoCAD Introduction: Draw the P-1 drawing using all co-ordinate methods The dimensions are given in the question Use the dimesions and draw a section using AutoCAD software Procedure: Step-1: Open the AutoCAD software in desktop and choose the imperial First open the AutoCAD software…

Aim: To creating a floor plan, footing details and isometric view of the given drawings using AutoCAD software as shown in the result Introduction: The drawing is given in the attachment Use the AutoCAD 2023 software Refer the dimesions as in the drawings and draw the sketches Procedure of how to draw the drawing is given…

Aim: To draw the all given drawings in the attachment for this challenge as given the dimensions on the sketches using AutoCAD 2023 software. Introduction: The drawings are given for practice using the AutoCAD 2023 software Here totally 11 drawings for practice The drawings are creating depends on the type of length. For…

1. Residence Plan: Sketch the layout of a residence as shown in the Figure 1. Consider all dimensions as reference to sketch the unit plan. Also the text in the layout are only for reference. Assume the missing dimensions. Also, refer the schedule for size of the doors. Aim: To draw a sketch the layout of a residence as…

1. Create a column schedule as shown in the figure. Note: Create a column schedule with the help of lines. Also, insert text with the help of Dtext command or Single Line text. Hint: Use font name: romans.shx; Height: 8”, Justify: Left Aim: To create a column schedule as shown in the Question using AutoCAD software…

1. Draw the elevation and details of a wardrobe as shown in the Figure below. After sketching, you need to provide the dimensions and text with the use of layers. Use proper text styles and dimension methods to document it. Also, assume dimensions, wherever needed. Note: All dimensions are in mm. Aim: To draw the elevation…

1. Create the Plan and Sections as shown in the Figures. Use proper dimension techniques and dimension styles to document the project. Assume the sizes of the doors and windows as per construction standards. Refer to sections for stair details if required. Aim: To create the Plan and Sections drawings as shown in the figures…

Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East    c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Beam, Footing Plan) Aim: To…

1. Create the templates as shown in Figures. Take the size of the title block as per industry standards or you can assume it as per the size of the paper. Use text and attributes wherever required. After creating the title block you need to save it as a block with names: Custom1_titleblock and Custom2_titleblock, respectively.…

1. Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. Aim: To create the layouts of the Kitchen and provide hatches pattern as shown in the figure by…

1. Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the layout.…

1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. Aim: To create a 3D Furniture element as shown in the Figure using the AutoCAD software Introduction: Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing. Procedure: First open the 3D modeling…

1. Create a 3D Isometric View of the building with plan and elevation given. Aim: To create a 3D Isometric View of the building with plan and elevation given using the AutoCAD software Introduction: Create a 3D Isometric View of the building with plan and elevation given Procedure: First of all open after open the software,…

1) From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately Aim: To create a new project from the file menu in Architectural template by using the Revit software Introduction: From the file menu, create a new project (Structural / Architectural /…

Create a 3 dimensional model of the residential building with a rendered view. Aim: To create a 3 dimensional model of the residential building with a rendered view by using the Revit software Introduction: Create a 3 dimensional model of the residential building with a rendered view Procedure: First star the model drawing…

1) What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. Revit building elements are of three types: 1) View elements 2) Model elements 3) Annotate elements Annotation elements Datum elements Building Information Modeling (BIM): BIM is a virtual representation of the physical and functional…

1) Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with grids created from…

1) Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level Aim: To create a celing in first floor level from week 3 challenge created layout using the Revit software Introduction: Based on the project saved from Week…

1) Why are building codes or standards essential for the modeling/ efficiency of drawings in Revit ? A set of standards that are uniform to all structures It protects the construction safety Modern construction methods Provides building standards 2) From the National Building Code list the groups that will be essential…

1) Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project Aim: To set project base point and project shared coordinates for the project in Revit software Introduction: Open an architectural template. Using the Manage tab set project base point and…