Advanced Sheet Metal Design Using NX Cad Challenge_6_Bracket

AIM: To design & develop the Roof of a car with its components by following the master section and design parameters. Introduction: An automobile roof or car top is the portion of an automobile that sits above the passenger compartment, protecting the vehicle occupants from sun, wind, rain, and other external elements. Roof…

Use the Section from your Hood design and calculate the Section Modulus using the formula  S = I/y  Where,  S = Section Modulus I = Moment of Inertia y = distance between the neutral axis and the extreme end of the object    SECTION MODULUS:                      Section modulus is a geometric property for a given cross-section…

Design of Automobile Backdoor AIM: Use the provided styling surface to come up with a back door design, use appropriate design methodologies, and provide the necessary reinforcements and embosses. INTRODUCTION: The backdoor or tailgate is the rearmost part of the automobile which opens upwards, downwards, and sideways…

 Fender Design: Aim: Create a fender design using the skin data and the master section to create the Drip Area.For the Sill, Bumper, Baffle(Splash), and A-Pillar mount create your own design according to the Engineering standard FENDER Fender is a closure component, closing the engine compartment and other compartments.…

AIM: Design Hood Outer Panel, Inner Panel and the necessary reinforcements by following the Master Section mentioned with the Design parameters Introduction Hood is the component which is placed over the engine compartment . The design of the hood is not only to enhance the look of the car , it also improves the aerodynamics…

AIM: To prepare repare a table that includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium-ion cells. Give your detailed explanation on it. Compare the differences between each type of Li-ion battery based on their characteristics.    …

Genetic Algorithm   AIM : To study about Genetic Algorithm and to calculate the global maxima of stalagmite function using Genetic Algorithm in MATLAB.   OBJECTIVE : To write a code in Matlab to optimise the stalagmite function and find the global maxima of the function and plot graphs based on…

Aim : To solve a 2nd Order Differential Equation of a simple pendulum using MATLAB.   Objective : To write a program to solve the ODE of the motion of a simple pendulum using MATLAB. Plot the graph of the displacement and velocity. Create a simulation of the pendulum in motion. Description: The motion of a simple pendulum…

AIM :  To write a program to simulate the forward kinematics of a 2R Robotic Arm in Matlab.   OBJECTIVE : To solve and simulate the forward kinematics of a 2R Robotic Arm and understand the movement of manipulator and create an animation of working of a 2R Robotic Arm.    Description…

Title of the Project: Advanced Sheet Metal Design Metal bracket-II Using NX Cad    Objective: To create Advanced Sheet Metal Design Metal bracket-II Using NX Cad    Introduction: Sheet metal is widely used across various industries is because of its applications and easy manufacturability.It also…

Title of the Project: Advanced Sheet Metal Bracket Design Using NX Cad Objective: To create an Advanced Sheet Metal Bracket Design Using NX Cad Introduction: Sheet metal having thickness 0.6mm to 6mm is easy to work and manufacture as seen in this bracket modeland perform operations like rolling,flattening and…

Title of the Project:Advanced Sheet Metal Design creating Odd Shaped Enclosure Using NX Cad   Objective: To create Odd Shaped Enclosure Using NX Cad.   Introduction: Sheet metal is used for material application that are below 6mm in thickness.Materials that are used commonly for sheet metal applications…

Title of the Project: Box Assembly in advanced sheet metal design using NX CAD   Objective: To create Box Assembly in advanced sheet metal design using NX CAD   Introduction: Sheet metal which has various advantages like metal working, manufacturing and easy to work on operations such as bending,cutting during…

Title of the Project:Advanced sheet metal casing design using NX CAD    Objective: To create an advanced sheet metal casing design using NX CAD and draft the casing design as per given standards.   Introduction: Sheet metal is widely used in the manufacturing industry and materials used such is steel, alumininum, copper,…

AIM:To design and develop a CAD model (Door Trim panel) for the interior of a vehicle with a given Class A Surface and by refering to the given Master section for norminal thickness.Attachment features to be added to the CAD model following the design rules applied for the design of a Plastic component.    OBJECTIVES:Creation…

ASSEMBLY WORKBENCH   QUICK RETURM MECHANISM PART MODELS ASSEMBLY OF QUICK RETURN MECHANISM USING ABOVE PART MODELS   DRAFT OPERATION OF THE ABOVE QUICK RETURN MECHANISM  PDF FILE OF THE DRAFT OPERATION OF THE ABOVE QUICK RETURN MECHANISM    CV JOINT PART MODELS   ASSEMBLY OF CV JOINT…

Master section development  B Pillar component Picture of the sketches with Sketch solving status’s geometry tab Picture of the Detailed tree structure. Picture of the 3D CAD Create closed body  Create tooling axis and follow design rules. Follow the Master section to create flange Follow the master section…

Create the Door Applique Plastic component through the given Class-A surface.    Given CLASS A SUREFACE of door applique and counterpart Below images are Position sketches of 4 WAY LOCATOR, 2 WAY LOCATOR and HEAT STAKE are Iso-constrained   Tree Structure having geometrical set as "INPUTS"  Report…

Create the boss and Dog House for the Centre console coin holder considering the design rules Sketches showing screw bosses and doghouse using position sketch,Iso-constrained  Tree Structure having geometrical set as "INPUT" Screenshots of the completed design in various orientations (Isometric, Front, Side, and Top…

Create the rib for the Centre console coin holder considering the design rules Sketches following the design rules for RIB and being Iso-Constrained Tree Structure having Geometrical set as "INPUT" Screenshots of the completed design in various orientations (Isometric, Front, Side, and Top View) Report A detailed report…

Creation of Door Arm rest and add thickness to it  The final output of the Door arm rest plastic component. REPORT: DRAFT ANALYSIS  Class A Surface contains the asthetic surface with no mechanical parts or engineering features attached to it,it will be created using Alias software.The Class A Surface of the door…

Create the Core and cavity blocks for the switch bezel Tree Structure that contains Geometrical set as "Input",Closesurface and Publications of TOOLING AXIS,PARTING LINE,PARTING SURFACE and SWITCH BEZEL component.    Screenshots of the Draft analysis report for both the switch bezel plastic component Screenshots…

The Coin Holder Plastic component through the given Class-A surface. Tree Structure Screenshots of the Draft analysis report for both the given Class-A surface and the final plastic component Screenshots of the solid model with the proper color code of the draft angle in various orientations (Isometric, Front, Side, and…

The Switch Bezel Plastic component through the given Class-A surface Tree Structure having Geometrical set as "Input" and having Publication of Tooling axis,Class A,B and C surface.The closesurface option in part boby which is termed as "SWITCH BEZEL" Screenshots of the Draft analysis report for both the given Class-A…

The Base Bracket Plastic component through the given Class-A surface Tree Structure showing Geometrical set as "Input"  Tree structure having "Close surface" in part body and Publication having Tooling axis and Class A,B,C Surfaces.   Screenshots of the Draft analysis report for both the given Class-A surface…

Fan cover model meeting the requirements of the draft angle and perform the Draft analysis on the model. Image of the complete Draft analysis and Images of the color scale variant    The model with the proper color code of the draft angle in various orientations (Isometric, Front, Side, and Top View)…