Mix design of M35 concrete with fly ash   Aim:       To calculate the Concrete Mix Design for M35 grade concrete with fly ash.   Intoduction:       Concrete mix design defines as the art of selecting suitable ingredients of concrete and determining their relative proportions…

AIM:   To sketch a G+1 floor residential plan, according to Vaastu Shastra, and list down the names of the structural drawings required to be provided to the site for construction.   Also, assume the sizes of the structural elements (Column, Beam, Slab, etc.,) and accordingly calculate the individual corresponding…

Aim: Draw: 1. Architectural drawing of a residential building:   Residential house plan.   Elevation of residential building.   Section of a residential building.   2. Construction drawing:   Column floor plan of the building layout.   Footing plan layout of the building.   beam plan…

Aim: Create:   Template, inserting text and attributes   Warehouse doors and their placement in blocks   Electric legend and its block production   Different types of doors for a housing project   Drawing bars, creating a block and creating a table as a plan for bending bars.     Commands…

1. Aim : to relate the Kitchen Layout and to Also, use proper dimension techniques to dimension the kitchen layout. Also, insert text wherever required.  Commands Used:   Line.   Offset.   Arc.   Circle.   Hatch.   Dimensions.   Multiline text.   Layers.   Procedure: Step…

Aim:   To create plan and section layouts, create viewports, edit attributes, and create a drawing.   To create a kitchen layout on an A4 sheet and take a plot   To create multiview ports for industrial section drawing, scaling and rendering.   COMMANDS USED:   View   Layout.   Multiple…

Aim: To create 3D models and elevations:   Furniture elements    Isolated foundations   AASTHO beams   Drop columns with slabs   Walls   Commands used:   Extrude .   offset.   UCS.   box. Union .   Subtract.   move.   3D  orbit.    loft.…

AIM: To draw a 3D isometric view of:   Construction according to plan and height   Building facade   Staircase   Spread your legs       COMMANDS USED:   Push out.   Offset.   UCS.   Box.   Union.   Subtract.   Move.   3D orbit.   Border.  …

Aim: Create a 3D rendered model of a residential building in AutocadIntroduction: The main objective of this project is to understand how to create a plan in 2D, then convert it to 3D using 3D modeling in AUTOCAD, and then use materials and rendering.AutoCAD is primarily used to generate 2D sketches. Although it is possible…

Question  1) Based on the saved project from week 3, continue from the first floor. Model the Ceiling from the Architecture tab above the walls at the first floor levelReply: aim: Model the ceiling from the Architecture tab above the walls at the first floor level.Introduction:The ceiling is the upper internal…

Aim: Create an architectural and structural model with 3D rendering using REVIT.1) Select the type of structure you want to build from one of the three below:        A. Residential apartment with multiple units        b. Office buildings        C. SchoolAnswer: My…

1) Use Dynamo to create a set of sine points and create a curve and create a surface from the curve.Objective: To create a set of sine points, create a curve and Create a surface from the curve.Method:Step 1:Open the Revit software, select the architecture template and click the dynamo option on the administration toolbar.After…

1. a) Answer: Failure with concrete crushing and bar buckling at the bottom flange next to the column Flexural damage is usually associated with cracking and spalling of concrete and yielding of reinforcement. In contrast, flexural failure comes with the disintegration of the concrete behind the cover, often with buckling…

I HAVE ATTACHED THE CALCLATIONS BELOW IN PDF FORMAT

1.Static and dynamic analysis: ●Dynamic refers to a  force on a structure that changes size,position or direction. While static refers to the force that has constant size, position and direction on or within a structure.●In dynamic analysis,Inertia and damping forces are taken into account in equilibrium equation.…

 Aim:Model a 25-story building on ETABS 2023 with structural properties as shown below. The level of the ground floor or plinth can be taken at a height of 1.5 meters from the base. Each of the 25 consecutive floors has a floor height of 3 meters. : Procedure:Step 1:Open the ETABS software.Click the File menu…

1.Examining the framing plan with respect to symmetry in the X direction: If we split the plan in half vertically, it will look like a mirror. So we assume that the given plan is symmetric in the X direction. Examining the framing plan with respect to symmetry in the Y direction: If we split the plan…

1. As the structure becomes stronger, it will shrink, expand and crack more.In structure A there will be more shrinkage and expansion of the floor, while in structure B and C there will be minimum cracks.Shear walls in the structure also decide whether the vibration of the floor is more or less in the structure, it will…

 AIM: create a design and analysis of a 25-story building using Etabs software and find the natural time period, shape of oscillations, etc. PROCEDURE:open a new modal and set custom grids and floorsadd plinth level as 1.5m and each floor is 3m 2 storey building modal-A define the properties and section…

 AIM - i) To design beams from Etabs 2018 in detail.         ii) Provide detailed description of longitudinal and shear reinforcement for two continuous beams.        iii) Calculate the value of the maximum shear force in any of the spans of continuous beams   …

 AIM To provide longitudinal reinforcement details for two columns (3A and 3B), from foundations to terrace level Introduction - 1) The axial compressive stress factor considered for all load combinations related to seismic loads must be     limited to 0.40 fck in all columns. 2) Minimum column…

Aim1) Run analysis and design RCC shear wall2) Extract values ​​of longitudinal steel ratio, boundary element length and shear reinforcement ratio from the design results.3) Provide elevation drawings of shear wall reinforcement details.Introduction -Procedure -Step 1)i) Open prompts 9 file and download it.ii) Open this…

AIM - To carry out modelling, analysis, design and preparation of structural drawings of G+3 RCC building at Guwahati Assam. Introduction - 1) ETABS is an engineering software product that provides analysis and design of multi-story buildings.2) SAFE represents the state of the art in three-dimensional finite…

1 )AIM:     Model the isolated base provided in Week 11 of the SAFE challenge. Analyze and design it to verify the size, depth and steel provided as per calculations.   INTRODUCTION:     SI SAFE (Finite Element Slab Analysis) is the best concrete slab and foundation design tool by…

Aim - i) To design a structural model on the basis of provisions from IS 1893 and IS 13920 in seismic zone 5.         ii) To Run a modal response spectrum analysis and check analysis results of the Etabs  .   Introduction -  1) ETABS is an engineering software product…