OBJECTIVE-To Write A Program That Solve A second Order ODE Using MATLAB.  GOVERNING EQUATION- WHERE- g = gravity in m/s^2 l  = length of pendulum in meter b = damping coefficient m = mass of ball in kg GIVEN- g = 9.81 m/s^2 l  = 1 meter b = 0.05 m = 1 kg THEORY- A pendulum is a body suspended…

AIM - To study about Genetic Algorithm and to calculate Global Maxima of Stalagmite function using GA in Matlab. OBJECTIVE - To Study About Genetic Algorithm and Stalagmite Function. To Write Code in Matlab to Optimise the Stalagmite Function and Find the Global Maxima of the fFnction. To Plot Graphs for all 3 related…

AIM -  1) - To extracts the 14 co-efficients and calculates the enthalpy, entropy and specific heats for all the species in the data file. 2) - To Calculate the molecular weight of each species. 3) - To show the variation of these parameters against corresponding temperature. FILE PARSING : Parsing…

AIM-  1. To make a simulink model of a Doorbell using solenoid block with given details. 2.To sense the temperature of a heater using Thermistor & turn on or turn off the fan with given conditions. THEORY -  Solenoid-: A solenoid is a type of electromagnet,the purpose of which is to generate a controlled…

AIM-To implement control logic of a “washing machine” using Stateflow as per given sequence.  If the power supply is available, the system gets activated  If the Water supply is not available, stop the process & indicate through LED Soaking time should be 200s followed by Washing time of 100s.…

AIM - To Carry out a system-level simulation of an all-terrain vehicle.  OBJECTIVE - To check the speed of the vehicle for the given initial conditioin. By applying the Brake and also changing the value of Throttle ,we have to compre the result. To study the plot of CVT shaft speed,also the plots of Vehicle…

AIM - To Use a ADVISOR Tool For Simulating the given condition . OBJECTIVE -   1.   For EV_defaults_in file, if cargo mass is 500 kg with all other default conditions, can the vehicle travel for 45 km with FTP drive cycle? Conclude          your observations. 2.   In…

AIM -  1. To differentiate between  mapped and dynamic model of engine, motor and generator. 2. To determine how the model calculate miles per gallon. 3. To run  the HEV Reference Application with WOT drive cycle.To Change the grade and wind velocity in the environment block,Also…

AIM -  1. To determine the  types of power converter circuits are employed in electric and hybrid electric vehicle. 2. To determine the EV Steady State Speed when the duty cycle is 70%. 3.  To develop  a mathematical model of a DC Motor for the  equation using Simulink.…

AIM -  1. To explain a MATLAB demo model named ‘Speed control of a DC motor using BJT H-bridge’. 2. To develop  a 2-quadrant chopper using simulink & explain the working of the same with the relevant results. 3. To explain the operation  of BLDC motor. OBJECTIVE 1…

AIM - 1. To calculate the energy required for braking , for a defined driving cycle. 2. To find out why electric motor can’t develop braking torque at high speed similar to starting . 3. To make  a MATLAB program which plots contour of given motor speed, torque and efficiency values. …

AIM - To prepare a Project report on Powertrain for Aircraft In Runway under given sections -  Part A: 1. Search and list out the total weight of various types of aircrafts.  2. Is there any difference between ground speed and air speed? 3. Why is it not recommended to use aircraft engine power to move it on…

AIM - 1. To Create a MATLAB model of electric car which uses a battery and a DC motor.           2. To prepare a report about our model including following -  Objectives:         1. System level configurations        2. Model parameters    …

OBJECTIVE - To Create a detailed MATLAB model of an electric rickshaw (three wheel passenger vehicle) as per the given details:  AIM -  a). Rear wheels driven by PM brushed type motor. b). To Assume efficiency points of motor controller and motor. c). To Make an excel sheet of all…

OBJECTIVE 1 - To Prepare table which includes materials & chemical reactions occurring at the anode and cathode of LCO, LMO, NCA, NMC, LFP and LTO type of lithium ion cells. THEORY -  Definition Of Battery - A battery is a source of electric power consisting of one or more electrochemical…

AIM - To study about the State Of Charge (SOC) Estimation .  OBJECTIVES -   Run the provided link for design and test of lithium ion battery management algorithm.  Simulate the 3 test cases from harness dashboard and write a detailed report on the results.  What is coulomb counting? Refer…

AIM - To Prepare a Mechanical Design Of Battery Pack .  Given - Battery pack capacity: 18 kWh , Cell: ANR26650M1-B .  Theory -                                    Lithium Werks’ 26650 cells are capable of delivering very high power due to its use of patented Nanophosphate battery technology. Based on lithium iron phosphate…

AIM - To study about the Thermal Modelling Of Battery Packs.  OBJECTIVE - For a 10 cell series lithium ion battery model, we have to simulate the thermal effects and compare life cycle performance at various temperatures, charge & discharge rates using MATLAB. Theory -  A lithium-ion battery or Li-ion battery is a type…

AIM - To Develop a Simulink Model on Vehicle Direction Detection .  OBJECTIVE -  To Develop a MATLAB Simulink model as per requirement. To Tag the requirements to the simulink model. To Create Data Dictionary  &  generate code of a model . For  code generation choose , Storage class for Input…

AIM - To develop a MATLAB Simulink Model Of Adaptive Cruise Control .  OBJECTIVE -  1). To Develop Adaptive Cruise Control feature as per the Requirement Document using MATLAB Simulink. 2). To Follow all the MBD related processes: Requirement Tagging & Traceability, SLDD creation, Configuration…

AIM - To develop a MATLAB Simulink Model Of Adaptive Cruise Control .  OBJECTIVE -  1). To Develop Adaptive Cruise Control feature as per the Requirement Document using MATLAB Simulink. 2). To Follow all the MBD related processes: Requirement Tagging & Traceability, SLDD creation, Configuration…

AIM - To develop a project on Traffic Jam Assistant System.  OBJECTIVE - To develop one specific requirement of Traffic Jam Assistant algorithm which would predominantly feature in the IPC algorithm.  The Project must be done keeping in mind the following processes & steps. This model must be developed…