Project: Codes to solve otto cycle Objectives: To obtain pressure and volume for different process and plotting them to obtain PV diagram for cycle. To determine thermal efficiency by considering the compression ratio for modern petrol engine vehicle Theory: Otto cycle which is also called as constant volume cycle, is…

.Objectives: 1: To know the variation of drag force with respect to velocity, 2: To know the impact of drag coefficient on drag force.   2.Introduction:        Automobile are the fine invention in context of mankind. Since the invention of internal combustion engine (ICE), transportation…

Objectives: Linear and cubic curve fit of given data set. Finding the parameters to determine the goodness of curve fit. To fit the curve by using splitwise method.   Theory: The process of constructing the curve or mathematical function based on the given data set is called as curve fitting. Curve fit examines the…

Objectives: To optimise the stalagmite function. To find the global maxima of stalagmite function. Theory:  Stalagmite function is the basis representation of the stalagmite rock. This functions contains a various local maxima and a global maxima. Genetic algorithm is the search and optimization technic which imitates…

Objectives: To extract all the 14 coefficient from the given data file. To use those coefficient to find the value of enthalpy, Specific heat capacity and Entropy for individual species for different temperature range and plot them. To obtain the molecular weight of individual species. Theory: Prasing is the process of…

a) Door bell Simulink model:   Objectives: To create the simulink model to simulate the working of a doorbell. To observe the physical movement of plunger based on the input provided. Condition: Switch is closed for two seconds. Model: Above figure shows the model based description of door bell which contains four major…

Objectives:   To build a Forward energy based fuel comsumption model for conventional vehicle To estimate the fuel economy number for different drive cycle(UDDS and HWFET) To find out working region of an engine for UDDS and HWFET drive cycle. To observe the speed of various component with respect to time Keywords:Forward…

Aim: To Develop and Analysis the Working of Model for Vehicle Direction Determination by use of Matlab and Simulink. Objectives: To develop the model for Vehicle Direction Determination as per the following requirements. Requirement1: Steering wheel input as raw rate (Signal_Name:SteeringWheel_YawDegreeInput) is the input…

Lithium Ion Battery (LIB) is high energy density rechargeable battery where Li ion moves from positive electrode to negative electrode while charging and from negative to postive electrode during discharging and electrons moves through the outer circuit.The movement of electron and Li ion is same which can be illustrated…

Aim: To Develop The Model for Adaptive Cruise Control System for Changing its Modes Based on Lead Vehicle Speed , Drive Vehicle Speed and Operation Set by Driver with the use of Simulink. Objective: To develop the model as per the requirement. To Generate the C code from the model. Introduction: Adaptive Cruise Control(ACC)…

Mapped based model: In mapped based model, the characteristics like Torque, speed, fuel consumption,input power etc  of engine, motor, generator is taken from the actual value and implemented by the help of lookup tables. Based on the input to the look up table , the value for torque, power etc is determined. Dynamic…

1. The drive cycle is the plot of speed of a vehicle with time for a given driving condition.To Understand amount of energy required for braking we are considering an Urban dynamometer Driving Schedule(UDDS). The Braking energy can be calculated by use of following formula, `E_(Brake)=1/2M(V_i^2-V_f^2)` where, M is the…

1. EV default model: For the EV default model we have consider,the cargo mass of 500 Kg and inital SOC of the battery as 100%. Battery: Battery Type: Lead Acid Battery Weight: 275 Kg No of module=25 Voltage: 308 V Total mass of the vehicle considered: 1508 Kg First advisor is open , than cargo mass is added to it. Than…

Title: Forward energy based Fuel Consumption Model for P1 Hybrid Vehicle Objectives: Estimating the fuel consumption of P1 Hybrid Drive for different drive cycle. To compare the hybrid model with conventional model   1. Introduction   With global declination the fossil fuel and tight emission norms by the government…

ROSHAN ARYAL EV BATCH 17 Aim: To carry out the system level simulation of Baja All terrain Vehicle. Introduction: Baja SAE is an Collegiate Design competition which is run by the society of Automotive engineers International where the students from all over the universities participate and designed a small off road car.…