Aim : To calculate the Concrete Mix Design for M35 grade concrete with Flyash & M50 grade concrete without Flyash. Introduction :  The concrete mix design involves a process of preparation in which a mix of ingradients creates the required strength and durability for the concrete structure. Because every…

Aim of Project :  To skectch G+1 floor plan, according to vastu shastra, and list down the names of the structural drawings required to be provided to the site for the construction. To calculate the individual corresponding loads from the members as per IS code by assuming the size of the structural elements.…

AIM : Design and Draft a layout of a residential building with the following details: a. Plot Size: 60’x20’(18.3m x6m)  b. Orientation- Facing East   c. Develop the following: 1. Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Bean, Footing Plan)…

AIM : CREATING THE STANDARD TITLE BLOCK TEMPLATES OFTEN USED WHILE SUBMITTING THE ARCHITECTURAL DRAWINGS.  PROCEDURE  Title Block One:  Create the Table by using the rectangle command and draft all four sides of the table. Using line, offset, and extend commands, draw the blocks the table to complete the…

AIM: Create the layouts of the Kitchen and provide hatches pattern as shown. Also, use blocks wherever required. Provide appropriate dimensions in the plan. Assume the size of doors, appliances and others as per the standards. Introduction : The following commands are used to draw the above images  Line Rectangle…

1. Create a 3D Furniture element as shown in the Figure. Assume dimensions which are missing Aim:  To create a 3D Furniture element using AutoCAD software.   Introduction: These are the command used to draw the figure  QNEW command UN command Box command Rectangle command Extrude command SUBTRCT command…

AIM : To create multiple viewports, scaling the drawing and setting in template in AutoCad Introduction : Open autocad application Type Qnew and open new drawing Set units according to drawing Switch on object snap and object snap modes Ortho mode is ON   AIM 1. Create a layout of the Plan and Section A of the project…

AIM 1. Create a 3D Isometric View of the building with plan and elevation given. INTRODUCTION :  To draw the above plan, elevation these are the following commands are used: Line Rectangle Polygon Circle Trim Mirror Offset Array Rotate Move Erase Dimension Text Fillet   Procedure : open the auto cad as imperical…

CREATING A 3D RENDERED MODEL FOR A RESIDENTIAL BUILDING IN AUTOCAD   Aim:To create a 3 dimensional model of the residential building with a rendered view in AutoCAD. Introduction:  Rendering is a process of creating a raster image based on 3D objects in a scene. A renderer is used to calculate the appearance…

3D Creation of Ceiling, Roof, Architectural plan, Structural plan, Sectional view, Elevation view and Camera specific view for a house plan using REVIT Introduction: In order to create the ceiling and roof for a building using Revit software following steps can be followed: Ceiling: Open Revit software --> Architecture…

                         Creating Architectural and Structural model with 3D rendering using REVIT   1) Aim : Select the type of structure you want to build from one of the three below: Multi-Unit Residential Apartment Office Buildings School Introduction…

Creating Conceptual mass in REVIT and Creation of Sinusoidal curve and a Parametric stadium using Dynamo   AIM 1: Using Dynamo create a set of sinusoidal points and create a curve and create a surface out of the curve.  INTRODUCTION : Dynamo is an open source visual programming language for Revit, written…

                Usage of Navigation tool , Timeliner and Clash Detection test using Naviswork Introduction: Naviswork is a 3D design review package for Microsoft windows. It is used primarily in construction industries to complement 3D design packages such as Autodesk Revit,…

AIM 1 : What is the mode of failure or damage of the beams in the figure BELOW? Are the damages repairable? Elaborate a)                                                      b)                                                 c)                         EXPLAINATION 1 :  a) OBSERVATIONS: The Concrete gets damaged/broken…

                                                              Structural dynamics   AIM1 :Differentiate Static analysis and Dynamic analysis with proper representing…

                                                 CONCEPT ON POSITIONING OF COLUMNS AIM 1: Comment on the layout of the framing plan concerning earthquake resistance in the two horizontal directions…

                                Conceptual design of a building with columns and shear walls AIM 1 : The building shown, 20 × 35 m in plan, has columns on a 5 × 5 m grid and shear walls (with dimensions shown in m, 250 mm in thickness)…

QUESTION 1 : A five storey structure with 5 translational DOF is shown here. Each storey has mass ‘m’. The eigenvalue problem has been solved and the 5 periods of vibration Tn and their corresponding mode shapes, φn has been derived. The fundamental period of vibration and its associated…

                                          Modelling of 25 storey building with the specified properties using ETABS   Aim: Modelling a 25 story building on ETABS 2018 with structural properties including Ground…

AIM : Comparative study of different storey buildings for Seismic forces Factors influencing the dynamic characteristics of a building Factors influencing the Natural Period of a building Factors influencing the Mode shape of oscillations                        …

Aim:  Detail design of beams in Etabs provided in Challenge 7 The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment ResistingFrame. The following challenge deals specifically with two continuous beams in the 1st floor.         1) 3 span continuous beam along…

Aim: Reinforcement detailing of columns in Etabs . The ETABS file for a G+4 building is provided. Run the analysis and design the RCC Moment Resisting Frame. The following challenge deals specifically with two columns at the following grid intersections. 3A 3B Provide details of longitudinal reinforcement for the two columns,…

                                      ANALYSIS AND DESIGN OF RCC SHEAR WALLS IN THE MODEL USING ETABS   Aim :To run the anlaysis and design the RCC Shear walls forv the giuven ETABS model. To extract the values of longitudinal…

                                                    Design of Shallow Foundation (Isolated Footings)   AIM : Design a square footing for a column size of 400x400. The compression axial…

#13 - Foundation Design using SAFE AIM: To design the Isolated footing of given load and also to Design the pile foundation of of given data using IS 2911 part-2 and SP 34.   AIM 1: Model the isolated footing provided in week 11 challenge on SAFE. Analyze and design it to verify the size, depth and steel provided…

                                                             Structural Modelling using Etabs 2018 AIM:  The architectural drawings for a G+7 residential building…

                                         Project 2_Design & Analysis of a Hostel building at Guwahati, Assam  AIM: To model, analyse, design and to prepare the construction drawings of  G+3 RCC building…