Calculation the concrete mix design for m35 grade concrete with fly ash and M50 grade concrete without fly ASH

1.)              2.)     Pz = 0.6 Vz^2 Here Pz = Wind pressure @ height z, in N/m^2         Vz = Design wind speed @ height z, in m/s    The windn preasure Pd = KdKaKcPz Kd=> Wind directional factor Ka=>Area averaging factor Kc=> Combination…

P1.)  First select the line tool Type the given point. Then dx =0 and dy =7 dx=1 and dy =0 The dx =5 dy =0 dx=0 dy=-1 dx= -5 dy =0 dx=5dy=0 dx=1 dy =0 dx=-6 dy=0 Then join the line.       P2.)     Using line tool plot 2,1 press first @ for every point dx=0 dy = -7 dx=2 dy = 0 dx = 3,dy = 0…

1.) Aim  To draw the cs of load bearing wall spread footing   procedure use line coment draw with respect with the dimensuion With dimension result   2.) Aim CS isolated footing Procedure Use line comment draw with respedct with the dimension result 3.) Aim Line drwaing of tweo bedroom Procedure  use…

1.)   2.)   3.)   4.) 5.) 6.)   7.)   8.)   11.)      

  1.)           2.)                 3.)  

1.)     2.)   3.)   4.)   5.    

1.)   2.)   3.)   4.)     5.)    

1. Aim  :to draw the Plan and Sections as shown in the Figures. procedure : Use line commend  Draw the walls as per the form Divide the walls move as per the dimension provide the text and dimesions provide the windows as per the layout finish the full layout by the above procedure provide the door d1 d2 …

1.) Aim:  Plot Size: 60’x20’(18.3m x6m)  Orientation- Facing East  . Architectural Drawing (Floor Plan, Elevations, and Sections) 2. Structural Drawing (Column, Bean, Footing Plan) procedure Fix the units too feet and inches set the limits plot the size of layout Draw as the procedure give th…

1.) AIM :- To  creat the shedule and do a block asper the procedure. procudure :- Set the units first Select the line commend  Get the dimensions  take offset for the procedure cresat the tables type the given shedules   creat the next table as show in the figure. use the line commend. use the commend…

1.) Aim:       To Create the layouts of the Kitchen and provide hatches pattern as shown. Also to  use blocks wherever required.  Introduction                  This kitchen layout is doen by Autocadd,by using the rectangulear and lien tools procudure…

1.) Aim To Create a layout of the Plan and Section A of the project in Challenges 7, using the template Tutorial-mArch.dwt in a scale as given in the Figure. Use the MV command to create the viewport of the size as shown in Figure. Also, use ATTEDIT command to edit the information in the title block. Use A1 size for the…

1.) Aim Create the 3d modelof the Aastho tyre grider Procedure: Starting with new drawing sheet 3d model sheet Setting up the units Using th extrude commend. Result:   2.) Aim To creat the isolted footing. Procedure New drawing sheet. 3Dmodel Setting the units Use the recatngle and revolve commend. Result: 3.) Aim…

1.)  AIM Create a 3D Isometric View of the building with plan and elevation given PROCEDURE Set the units use line commend Draw the plan usoing line commend  Extrude the achived  paln     To the hight of 10'     Create the window using extrude  creat thew opening      creat…

1.) AIM  To Create a 3 dimensional model of the residential building with a rendered view. Procedure set the units set dimesional style manager foe units Use the plyline and draw a rectagle. use the pl line and make partician the wall.           Set the layers as per the form. Set the colour.…

1.)  Aim  From the file menu, create a new project (Structural / Architectural / Construction template ) and name the project appropriately Procedure open the revit click the new tab select the any template (construction,structure,arch) Result 2.) Aim Save the new project file. Close and open using icons from…

1.)   Aim :  What is BIM? Summarize the features of BIM and benefits of using BIM over 2D CAD tools. Result  Three types namely View elements Model elements Annotate elements Annotation elements Datum elements Bim is a visual representation of tyhe pysical and fundametal characteristics of a facility from…

1.)  Aim To Use the project file created from Week 2. Use it for this assignment. Based on your layout from week 2, using floor tool under architecture tab and select the floor with appropriate material and thickness using the property browser create a layout in the Ground floor Level. Align the floor plan with…

1.) Aim To model a ceiling above the walls at the first floor level in revit Tools used Archietectural & ceiling tab Introduction The flor paln is created.Based on the project saved from Week 3, proceed from the First Floor Level. Model a Ceiling from the architecture tab above the walls at the first-floor level Procedure…

1.) A set of standards that are uniform to all structures. It protects the construction safety. Modern construction methods. provide buidling satndards. 2.) Group A: Residential buidlings Group B: Educational buildings Group C : Assembly buildings Group D: Instituatinal buildings Group E : Mercantile buildings Group F…

1.) Aim   To Open an architectural template. Using the Manage tab set project base point and project shared coordinates for the project   Procedure To create project shared coordinates Open arch tab Open manage tab Click on project coordinate and then specific shared coordinates In north/south type 0'0" In east/west…

1.) Aim Creating Rchitectural and structural model with 3d rendering using revit Introduction Autodesk revit ia s building information modelling(BIM)tool,which can be used more than one person working on a new project.This is an important feature in collabration within a project,between projects,and with other users,firm…